7115412TB, 7115412TD, 7115412TY, 7115412UB, 7115412UY, 7125412TB, 7125412TD, 7125412UB, 7125412UY
ELPTO
2005,2006
INDUCTION MANIFOLD AND REED BLOCK
Parts on group INDUCTION MANIFOLD AND REED BLOCK:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| -. | 13461A99 | [1] | GASKET SET | |
| -. | 17791T97 | [1] | POWERHEAD ASSEMBLY | |
| 1. | 44325A 1 | [1] | COVER/PLATE KIT, Exhaust | |
| 10. | 98885 1 | [1] | SLIDE | |
| 11. | 40138 6 | [1] | NUT, (M6) Stainless Steel | |
| 12. | 35459 | [1] | WASHER | |
| 13. | 40138 6 | [1] | NUT, (M6) Stainless Steel | |
| 14. | 43007 5 | [1] | GASKET | |
| 15. | 858552T 2 | [1] | CAP ASSEMBLY, Lower End | |
| 16. | 42658 5 | [1] | CHECK VALVE | |
| 17. | 41953 3 | [1] | SEAL, Oil | |
| 18. | 89224 | [1] | O-RING | |
| 19. | 40108 25 | [3] | SCREW, (M10 x 25) Hex Flange - Stainless Steel | |
| 2. | NSS | [1] | NOT SOLD SEPARATE, Exhaust Plate | |
| 20. | 13033 | [1] | TEE FITTING | |
| 21. | 14301 65 | [2] | TUBING, (38.00 Inches Bulk) (Cut to 5.50 Inch Length) | |
| 22. | 13035 1 | [2] | FITTING (Straight) | |
| 23. | 13545A 1 | [2] | MANIFOLD ASSEMBLY, Induction | |
| 24. | 827514 | [1] | BRACKET | |
| 25. | 821273 35 | [12] | SCREW, (M8 x 35) | |
| 26. | 817427 40 | [2] | SCREW, (M8 x 40) | |
| 27. | 816194 9 | [2] | STUD, (M6 x 44) | |
| 28. | 49221 | [2] | WASHER, (.187 x .500 x .062) Neoprene | |
| 29. | 816872 | [2] | WING NUT | |
| 3. | 812775007 | [1] | GASKET, Baffle Plate to Cylinder Block | |
| 30. | 40001167 | [2] | SCREW, (M8 x 110) (#4 Cylinder) | |
| 31. | 824470 | [6] | STUD, (M8 x 1.25) (#1, 2, 3 Cylinder) | |
| 32. | 13461 2 | [2] | GASKET | |
| 33. | 13460 | [2] | COVER | |
| 34. | 817427 55 | [4] | SCREW, (M8 x 55) | |
| 35. | 42963A11 | [4] | REED BLOCK ASSEMBLY | |
| 36. | NSS | [24] | NOT SOLD SEPARATE, Dowel Pin | |
| 37. | 13937 6 | [8] | GASKET | |
| 38. | 43018A 1 | [12] | REED SET | |
| 39. | 42982 1 | [4] | TAB WASHER | |
| 4. | 812775006 | [1] | GASKET, Exhaust Baffle to Exhaust Cover | |
| 40. | 42924 | [4] | RETAINER | |
| 41. | 884214 71 | [4] | SCREW, (M6 x 16) | |
| 42. | 804667A06 | [1] | DECAL, EPA Label Information (2006) | |
| 42. | 804667A05 | [1] | DECAL, EPA Label Information (2005) | |
| 5. | 821273 35 | [35] | SCREW, (M8 x 35) | |
| 6. | 99664 2 | [1] | FITTING, Elbow 90 Degree (.125-27 x .250) Nylon | |
| 7. | 42881A 1 | [1] | SHIFT RAIL ASSEMBLY | |
| 8. | 42981 | [2] | TAB WASHER | |
| 9. | 40001134 | [2] | SCREW, (M8 x 25) |
Parts catalog :
GEAR HOUSING, PROPELLER SHAFT - 2.07:1 GEAR RATIO
GEAR HOUSING(DRIVESHAFT)(2.07:1 GEAR RATIO)
GASKET SET COMPONENTS(ENGINE OVERHAUL)
FUEL PUMP
FLYWHEEL AND STARTER MOTOR
EXTENSION KIT
JET PUMP ASSEMBLY
JET PUMP COMPONENTS
KEY CHART
LUBE CHART
OIL INJECTION COMPONENTS
POWER TRIM COMPONENTS