428B116KD, 442B116KD, 4A72040LD, 4C72040LD
D-Tronic
1997,1998
Parts on group TRANSMISSION (DOWN ANGLE)(INBOARD):
Pos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
-. | 863744T 2 | [1] | TRANSMISSION | (1.5:1 RATIO) |
-. | 18901A 1 | [1] | TRANSMISSION | (2.0:1 RATIO) |
-. | 863744T 4 | [1] | TRANSMISSION | (2.5:1 RATIO) |
1. | 813278 | [1] | HOUSING | (REFER TO NOTE 1) |
10. | 813287 | [4] | SCREW | (REFER TO NOTE 1) |
11. | 813288 | [1] | PLATE-RETAINING | |
12. | 813289 | [1] | HOSE | (REFER TO NOTE 1) |
13. | 813290 | [1] | BAFFLE PLATE | (REFER TO NOTE 1) |
14. | 813291 | [2] | PIN-DOWEL | (REFER TO NOTE 1) |
15. | 813292 | [1] | SEAL-OIL | |
16. | 813293 | [7] | LOCKWASHER | (REFER TO NOTE 1) |
17. | 813294 | [7] | SCREW | |
18. | 813295 | [1] | CONTROL BLOCK | |
19. | 813296 | [1] | SCREW | |
2. | 813279 | [1] | COVER | (REFER TO NOTE 1) |
20. | 813297 | [1] | WASHER | (REFER TO NOTE 1) |
21. | 813298 | [1] | LEVER-SHIFT | (REFER TO NOTE 1) |
22. | 813299 | [1] | NUT | (REFER TO NOTE 1) |
23. | 813300 | [1] | SWITCH-NEUTRAL SAFETY | |
24. | 813301 | [1] | GASKET | |
25. | 813302 | [1] | PLUG | (REFER TO NOTE 1) |
26. | 813303 | [1] | WASHER | (REFER TO NOTE 1) |
27. | 811940 | [1] | FILTER KIT (INCLUDES REF. #29 & 30) | (REFER TO NOTE 1) |
28. | 815419 | [1] | FLUID FILTER KIT | |
29. | 813407 | [1] | O-RING | |
3. | 813280 | [1] | VENT CAP | |
30. | 813406 | [1] | O-RING | |
31. | 813305 | [1] | DIPSTICK | |
32. | 813306 | [1] | SHAFT-INPUT | (REFER TO NOTE 1) |
33. | 813307 | [4] | BEARING-ROLLER | (REFER TO NOTE 1) |
34. | 813308 | [1] | GEAR | (REFER TO NOTE 1) |
35. | 813309 | [2] | WASHER | (REFER TO NOTE 1) |
36. | 852066 | [1] | BEARING-TAPERED ROLLER | (INNER) |
37. | 853066 | [1] | BEARING-TAPERED ROLLER | (OUTER) |
38. | 813312 | [3] | RING-SNAP | |
39. | 813313 | [1] | KEY | (REFER TO NOTE 1) |
4. | 813281 | [12] | LOCKWASHER | (REFER TO NOTE 1) |
40. | 813314 | [1] | BEARING-BALL | |
41. | 813315 | [1] | SHIM | (.10MM) |
41. | 813316 | [1] | SHIM | (.15MM) |
41. | 813317 | [1] | SHIM | (.20MM) |
41. | 813318 | [1] | SHIM | (.50MM) |
42. | 813319 | [4] | DISC-CLUTCH (INNER) | |
43. | 813320 | [5] | DISC-CLUTCH (OUTER) | |
44. | 813321 | [2] | RING-SNAP | |
45. | 813322 | [2] | PRESSURE DISC | (REFER TO NOTE 1) |
46. | 813323 | [1] | BEARING-TAPERED ROLLER | (INNER) (REFER TO NOTE 1) |
47. | 813324 | [1] | BEARING-TAPERED ROLLER | (OUTER) (REFER TO NOTE 1) |
48. | 813325 | [1] | BEARING-TAPERED ROLLER | (INNER) (REFER TO NOTE 1) |
49. | 813326 | [1] | BEARING-TAPERED ROLLER | (OUTER) (REFER TO NOTE 1) |
5. | 813282 | [5] | SCREW | |
50. | 813327 | [1] | SCREW | (REFER TO NOTE 1) (REFER TO NOTE 1) |
51. | 813328 | [1] | SPACER | (REFER TO NOTE 1) |
52. | 813329 | [1] | O-RING | (REFER TO NOTE 1) |
53. | 813330 | [1] | FLANGE-OUTPUT | |
54. | 813331 | [1] | BEARING-TAPERED ROLLER | (REFER TO NOTE 1) |
55. | 813332 | [1] | BEARING-TAPERED ROLLER | (INNER) (REFER TO NOTE 1) |
56. | 813333 | [1] | BEARING-TAPERED ROLLER | (OUTER) (REFER TO NOTE 1) |
57. | 813334 | [1] | SHIM | (.10MM) |
57. | 813335 | [1] | SHIM | (.15MM) |
57. | 813336 | [1] | SHIM | (.30MM) |
57. | 813337 | [1] | SHIM | (.50MM) |
58. | 813338 | [1] | GEAR | (REFER TO NOTE 1) 1.5:1 RATIO |
58. | 813341 | [1] | GEAR | (REFER TO NOTE 1) 2.0:1 RATIO |
58. | 813344 | [1] | GEAR | (REFER TO NOTE 1) 2.5:1 RATIO |
59. | 813339 | [1] | SHAFT-INTERMEDIATE | (REFER TO NOTE 1) 1.5:1 RATIO |
59. | 813342 | [1] | SHAFT-INTERMEDIATE | (REFER TO NOTE 1) 2.0:1 RATIO |
59. | 813345 | [1] | SHAFT-INTERMEDIATE | (REFER TO NOTE 1) 2.5:1 RATIO |
6. | 813283 | [1] | SCREW | (REFER TO NOTE 1) |
60. | 813340 | [1] | SHAFT-OUTPUT | (REFER TO NOTE 1) 1.5:1 RATIO |
60. | 813343 | [1] | SHAFT-OUTPUT | (REFER TO NOTE 1) 2.0:1 RATIO |
60. | 813346 | [1] | SHAFT-OUTPUT | (REFER TO NOTE 1) 2.5:1 RATIO |
7. | 813284 | [4] | SCREW | (REFER TO NOTE 1) |
8. | 813285 | [2] | SCREW | (REFER TO NOTE 1) |
9. | 813286 | [1] | SEAL-OIL |