444236HRS, 4R42257RS
Bravo MPI
1998
Parts on group EXHAUST MANIFOLD AND ELBOW:
Pos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
-. | 861246A98 | [1] | GASKET SET, Engine Overhaul | |
1. | 860246A10 | [2] | MANIFOLD ASSEMBLY, Exhaust | |
1. | 864308T01 | [2] | MANIFOLD ASSEMBLY, Exhaust | |
10. | 863129 | [1] | BALL, Check | |
10. | 862994 | [1] | FITTING | |
11. | 862994T | [1] | FITTING | |
11. | 807988A 2 | [2] | ELBOW ASSEMBLY, Exhaust | |
12. | 864850A 1 | [2] | GASKET, Elbow, Resitrictor | (Standard Cooling) |
12. | 864549A 1 | [2] | GASKET, Elbow, Block Off | (Closed Cooling) |
12. | 42861 1 | [2] | FITTING, Pipe - Brass (.750-14) | |
13. | 864309T01 | [2] | ELBOW ASSEMBLY, Exhaust | |
13. | 73379 | [1] | PLUG, (.250-18) | |
14. | 863804 | [1] | FITTING, (.750-14) | |
14. | 864689 | [3] | PLUG, Expansion | |
15. | 43749 | [8] | SCREW, (.375-16 x 5.750) | |
15. | 73379 | [1] | PLUG, (.250-18) | (Early Models) |
16. | 42861 1 | [2] | FITTING, Pipe - Brass (.750-14) | (Late Models) |
16. | 93320A10 | [1] | RISER EXTENSION KIT, (3 Inch) | |
17. | 863804 | [2] | FITTING, (.750-14) | |
17. | 92499T | [1] | FITTING, (45 Degree) | |
18. | 32802 2 | [2] | PLUG, Pipe (.125-27) Brass | |
18. | 43749 | [8] | SCREW, (.375-16 x 5.750), Exhaust Elbow | |
19. | 863724 | [2] | GASKET, Restrictor | |
19. | NA | [1] | NOT AVAILABLE, Bracket, Flush Attachment | |
2. | 42861 1 | [4] | FITTING, Pipe - Brass (.750-14) | |
20. | 863726 | [2] | GASKET | |
20. | 864306A 3 | [1] | RISER EXTENSION KIT, 3 Inch Cold Riser | (Standard Cooling) SN# 0M614999 & Below |
20. | 864929A 1 | [1] | RISER EXTENSION KIT, 3 Inch Warm Riser | (Standard Cooling) SN# 0M615000 & Up |
20. | 864306A 2 | [1] | RISER EXTENSION KIT, 3 Inch Cold Riser | (Closed Cooling) SN# 0M614999 & Below |
20. | 864929A 2 | [1] | RISER EXTENSION KIT, 3 Inch Warm Riser | (Closed Cooling) SN# 0M615000 & Up |
21. | 11375 | [8] | STUD, (.375 x 9.56) | |
21. | 11376 | [2] | STUD, (.375 x 10.56) | |
21. | 864850A 1 | [2] | GASKET, Restrictor | (Standard Cooling) |
21. | 864549A 1 | [2] | GASKET, Block Off | (Closed Cooling) |
21. | 864547A 1 | [2] | GASKET, Full Flow | (With Risers Only) |
22. | 863714T | [1] | BRACKET | |
22. | 42861 1 | [2] | FITTING, Pipe - Brass (.750-14) | |
23. | 805979 | [6] | NUT, (.375-24), Flange | |
23. | 864378 | [1] | SCREW, (.250-20 x .375) Torx | |
24. | 864378 | [1] | SCREW, (.250-20 x .375) Torx | |
24. | 864531 | [8] | BOLT, (.375-16 x 9.00) | |
25. | 860008 | [3] | SCREW, (.250-20 x .625) Torx | |
25. | 863714T | [1] | BRACKET | |
26. | 93322A10 | [1] | RISER EXTENSION KIT, (6 Inch) | |
26. | 34714 | [8] | WASHER | |
27. | 863804 | [2] | FITTING, (.750-14) | |
27. | 860008 | [1] | SCREW, (.250-20 x .625) Torx | |
28. | 863724 | [2] | GASKET, Restrictor | |
28. | 864307A 3 | [1] | RISER EXTENSION KIT, 6 Inch Cold Riser | (Standard Cooling) SN# 0M614999 & Below |
28. | 864908A 1 | [1] | RISER EXTENSION KIT, 6 Inch Warm Riser | (Standard Cooling) SN# 0M615000 & Up |
28. | 864307A 2 | [1] | RISER EXTENSION KIT, 6 Inch Cold Riser | (Closed Cooling) SN# 0M614999 & Below |
28. | 864908A 2 | [1] | RISER EXTENSION KIT, 6 Inch Warm Riser | (Closed Cooling) SN# 0M615000 & Up |
29. | 863726 | [2] | GASKET | |
29. | 43749 | [8] | SCREW, (.375-16 x 5.750) | |
3. | 37372 | [2] | PLUG, Pipe (.500) | |
3. | 39072 1 | [2] | PLUG, Pipe (.125-27) Brass | |
30. | 863715T | [1] | BRACKET, ECM Mounting | |
30. | 864850A 1 | [2] | GASKET, Restrictor | (Standard Cooling) |
30. | 864549A 1 | [2] | GASKET, Block Off | (Closed Cooling) |
30. | 864547A 1 | [2] | GASKET, Full Flow | (With Risers Only) |
31. | 818598T | [1] | BRACKET, Shift Plate Mounting | |
31. | 42861 1 | [2] | FITTING, Pipe - Brass (.750-14) | |
32. | 12244 | [8] | SCREW, (.375-16 x 1.00) | |
32. | 34714 | [8] | WASHER | |
33. | 860008 | [6] | SCREW, (.250-20 x .625) Torx | |
33. | 863715T01 | [2] | BRACKET | |
34. | 28667 | [3] | SCREW, (.250-20 x 1.00) Stainless Steel | |
34. | 12244 | [8] | SCREW, (.375-16 x 1.00) | |
35. | 92152 | [3] | SPACER | |
35. | 860008 | [6] | SCREW, (.250-20 x .625) Torx | |
36. | 826713 8 | [3] | NUT, (.25-20) | |
36. | 864378 | [1] | SCREW, (.250-20 x .375) Torx | |
37. | 863804 | [2] | FITTING, (.750-14) | |
38. | 37372 | [2] | PLUG, Pipe (.500) | (Early Models) |
38. | 12524 | [2] | PLUG, (.375-18 x .475) Brass | (Late Models) |
39. | 16604 | [1] | FITTING, Straight (.125-27) | |
4. | 864689 | [3] | PLUG, Expansion | |
4. | 33395 | [2] | GASKET | |
5. | 33395 | [2] | GASKET, Manifold | |
5. | 53728 | [8] | SCREW, (.375-16 x 4.75) | |
6. | 863724 | [2] | GASKET, Elbow | (Standard Cooling) |
6. | 53728 | [8] | SCREW, (.375-16 x 4.75) | |
6. | 863726 | [2] | GASKET, Elbow | (Closed Cooling) |
7. | 863804 | [2] | FITTING, (.750-14) | (Closed Cooling) |
7. | 863786A 1 | [2] | FITTING ASSEMBLY, Drain | |
8. | 863786A 1 | [2] | FITTING ASSEMBLY, Drain | (Standard Cooling) |
8. | 47632 | [1] | O-RING, (1.112 x .103) | |
9. | 47632 | [1] | O-RING, (1.112 x .103) | |
9. | 863129 | [1] | BALL |