4A72040ND, 4C72040ND
ES 165
1998
Parts on group TRANSMISSION (V-DRIVE)(INBOARD):
Pos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
-. | 863745T 2 | [1] | TRANSMISSION | (1.5:1 RATIO) |
-. | 863745T 3 | [1] | TRANSMISSION | (2.0:1 RATIO) |
-. | 863745T 4 | [1] | TRANSMISSION | (2.5:1 RATIO) |
1. | 811961 | [1] | HOUSING | (REFER TO NOTE 1) |
10. | 813284 | [2] | SCREW | (REFER TO NOTE 1) |
11. | 813282 | [12] | SCREW | |
12. | 813281 | [16] | LOCKWASHER | (REFER TO NOTE 1) |
13. | 811960 | [1] | HOUSING | (REFER TO NOTE 1) |
14. | 813286 | [1] | SEAL-OIL | |
15. | 811964 | [1] | DIPSTICK | |
16. | 811956 | [1] | SEAL-OIL | |
17. | 813280 | [1] | VENT CAP | |
18. | 813303 | [1] | WASHER | (REFER TO NOTE 1) |
19. | 811963 | [1] | FILTER COVER KIT | (INCLUDES REF. #21 & 22) (REFER TO NOTE 1) |
2. | 811966 | [1] | PLUG | (REFER TO NOTE 1) |
20. | 815419 | [1] | FLUID FILTER KIT | |
21. | 813407 | [1] | O-RING | |
22. | 813406 | [1] | O-RING | (REFER TO NOTE 1) |
23. | 813302 | [2] | PLUG | |
24. | 813295 | [1] | CONTROL BLOCK | |
25. | 813301 | [1] | GASKET | |
26. | 813300 | [1] | SWITCH-NEUTRAL SAFETY | |
27. | 813296 | [1] | SCREW | |
28. | 811958 | [1] | WASHER | (REFER TO NOTE 1) |
29. | 811959 | [1] | PLUG | (REFER TO NOTE 1) |
3. | 811953 | [1] | SCREW | (REFER TO NOTE 1) |
30. | 813298 | [1] | LEVER-SHIFT | (REFER TO NOTE 1) |
31. | 813299 | [1] | NUT | (REFER TO NOTE 1) |
32. | 813294 | [7] | SCREW | |
33. | 813293 | [7] | LOCKWASHER | |
34. | 813312 | [3] | RING-SNAP | |
35. | 811970 | [1] | CUP-TAPERED ROLLER BEARING | (REFER TO NOTE 1) |
36. | 811969 | [1] | CONE-TAPERED ROLLER BEARING | (REFER TO NOTE 1) |
37. | 811967 | [2] | WASHER | (REFER TO NOTE 1) |
38. | 813308 | [1] | GEAR | (REFER TO NOTE 1) |
39. | 813307 | [4] | BEARING-ROLLER | (REFER TO NOTE 1) |
4. | 811965 | [1] | CLAMP | (REFER TO NOTE 1) |
40. | 813306 | [1] | SHAFT-INPUT | (REFER TO NOTE 1) |
41. | 813322 | [2] | PRESSURE DISC | (REFER TO NOTE 1) |
42. | 813313 | [1] | KEY | (REFER TO NOTE 1) |
43. | 813321 | [2] | RING-SNAP | |
44. | 813319 | [8] | DISC-CLUTCH (INNER) | |
45. | 813320 | [10] | DISC-CLUTCH (OUTER) | |
46. | 811968 | [2] | BEARING-BALL | (REFER TO NOTE 1) |
47. | 813315 | [1] | SHIM | (.10MM) |
47. | 813316 | [1] | SHIM | (.15MM) |
47. | 813317 | [1] | SHIM | (.20MM) |
47. | 813318 | [1] | SHIM | (.50MM) |
48. | 811979 | [1] | CUP-TAPERED ROLLER BEARING | (REFER TO NOTE 1) |
49. | 811978 | [1] | CONE-TAPERED ROLLER BEARING | (REFER TO NOTE 1) |
5. | 811954 | [1] | NUT | (REFER TO NOTE 1) |
50. | 811971 | [1] | CONE-TAPERED ROLLER BEARING | (REFER TO NOTE 1) |
51. | 811977 | [1] | CUP-TAPERED ROLLER BEARING | (REFER TO NOTE 1) |
52. | 811972 | [1] | BEARING-TAPERED ROLLER | (REFER TO NOTE 1) |
53. | 811973 | [2] | SHIM | (.10MM) (REFER TO NOTE 1) |
53. | 811974 | [2] | SHIM | (.15MM) (REFER TO NOTE 1) |
53. | 811975 | [2] | SHIM | (.30MM) (REFER TO NOTE 1) |
53. | 811976 | [2] | SHIM | (.50MM) (REFER TO NOTE 1) |
54. | 811984 | [4] | PIN-DOWEL | (REFER TO NOTE 1) |
55. | 811980 | [1] | SHAFT-OUTPUT | |
56. | 811985 | [1] | BEARING-TAPERED ROLLER | (REFER TO NOTE 1) |
57. | 811981 | [1] | WASHER | (REFER TO NOTE 1) |
58. | 811986 | [1] | BEARING-TAPERED ROLLER | (REFER TO NOTE 1) |
59. | 811982 | [1] | FLANGE-OUTPUT | |
6. | 811962 | [1] | HOSE-SUCTION | (REFER TO NOTE 1) |
60. | 811983 | [8] | SCREW | (REFER TO NOTE 1) |
61. | 811987 | [1] | GEAR | (REFER TO NOTE 1) 1.5:1 RATIO |
61. | 811949 | [1] | GEAR | (REFER TO NOTE 1) 2.5:1 RATIO |
62. | 811951 | [1] | SHAFT-REVERSING | (REFER TO NOTE 1) 1.5:1 RATIO |
62. | 811947 | [1] | SHAFT-REVERSING | (REFER TO NOTE 1) 2.5:1 RATIO |
63. | 811952 | [1] | SHAFT-INTERMEDIATE | (REFER TO NOTE 1) 1.5:1 RATIO |
63. | 811948 | [1] | SHAFT-INTERMEDIATE | (REFER TO NOTE 1) 2.0:1 RATIO |
63. | 811946 | [1] | SHAFT-INTERMEDIATE | (REFER TO NOTE 1) 2.5:1 RATIO |
64. | 811950 | [1] | GEAR | (REFER TO NOTE 1) 2.0:1 RATIO |
64. | 811945 | [1] | GEAR | (REFER TO NOTE 1) 2.5:1 RATIO |
7. | 813291 | [2] | PIN-DOWEL | (REFER TO NOTE 1) |
8. | 811957 | [1] | SEAL-OIL | |
9. | 813285 | [2] | SCREW | (REFER TO NOTE 1) |