Parts on group EXHAUST MANIFOLD AND EXHAUST PLATE:
Pos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
-. | 815791A90 | [1] | GASKET SET | (135/150) |
-. | 815809A90 | [1] | GASKET SET | (XR4/Magnum II/175) |
-. | 815810A90 | [1] | GASKET SET | (200) |
1. | 19050 | [1] | GASKET, DIVIDER PLATE | |
10. | 813938 | [3] | CAPNUT, (#10-32) | |
11. | 74824 | [4] | SCREW, (.312-18 x 1.250), COVER TO CYLINDER BLOCK | |
12. | 78690 | [2] | GASKET, RELIEF VALVE PLATE | |
13. | 69570 | [1] | SCREW, (#10-16 x .750), DIAPHRAGM TO PLATE | |
14. | 76451 | [1] | WASHER, DIAPHRAGM SCREW | |
15. | 14479 | [1] | DIAPHRAGM | |
16. | 16496 | [1] | WATER DEFLECTOR | |
17. | 16497A 1 | [1] | PLATE, RELIEF VALVE | |
18. | 64878 | [1] | SPRING, COMPRESSION POPPET VALVE | |
19. | 85303 | [1] | WASHER, POPPET SPRING | |
2. | 19036 1 | [1] | DIVIDER PLATE | |
20. | 14480 | [1] | POPPET, VALVE | |
21. | 64872 | [1] | GROMMET, POPPET VALVE | |
22. | 65848 | [1] | CARRIER, POPPET VALVE | |
23. | 99176 3 | [1] | GASKET, EXHAUST PLATE | |
24. | 18260A 1 | [1] | EXHAUST PLATE (W/STBD. SIDE FITTINGS) | |
24. | 18260A 2 | [1] | EXHAUST PATE (W/O FITTINGS) | |
25. | 68727 | [2] | FITTING, (.250-18 Brass), EXHAUST PLATE (STARBOARD) | |
26. | 20033 | [2] | PIN, Dowel | |
27. | 814701 1 | [1] | SEAL, EXHAUST PLATE | |
28. | 68010 1 | [1] | BRACKET, SEAL RETAINING | |
29. | 812832 | [8] | SCREW, (#10-16 x .500), BRACKET TO EXHAUST PLATE | |
3. | 814754 | [1] | SEAL, DIVIDER PLATE | |
30. | 89772 | [1] | CONNECTOR, (.125-27) (STRAIGHT) | |
31. | 77653 77 | [1] | HOSE, (24.500 Inches Bulk) (STARBOARD FITTINGS) | |
32. | 27132 | [1] | BUSHING, EXHAUST PLATE | |
33. | 19564 | [1] | GROMMET | |
34. | 12602 | [1] | GROMMET, EXHAUST PLATE | |
35. | 66727 | [1] | SCREW, (.312-18 x 1.250), EXHAUST PLATE ATTACHING | |
36. | 68783 | [1] | SCREW, (.312-18 x 2.50), EXHAUST PLATE ATTACHING | |
37. | 66725 | [3] | SCREW, (.375-16 x 3.50), EXHAUST PLATE ATTACHING | |
38. | 812905A 3 | [1] | BRACKET ASSEMBLY, FRONT | |
39. | 90285 | [4] | SCREW, (.312-18 x .625), FRONT BRACKET | |
4. | 814634 | [4] | CLAMP | |
40. | 18703 1 | [4] | WASHER | |
41. | 18778 | [4] | GROMMET | |
42. | 18578A 4 | [1] | BRACKET ASSEMBLY, REAR | |
43. | 814430 | [1] | FITTING, (.500-14) | |
44. | 92007 | [1] | FITTING, (.250-18) (90 DEG.) | |
45. | 99127109 | [1] | FUEL LINE, (57.00 Inches Bulk) | |
46. | 816311 | [2] | CABLE TIE, (8.00 Inches) | |
47. | 25970 | [6] | WASHER, POWERHEAD STUD | |
48. | 69254 | [6] | NUT, POWERHEAD STUD | |
5. | 31984 | [3] | SCREW, (.312-18 x 1.375), DIVIDER PLATE | |
5. | 53167 | [17] | SCREW, (.312-18 x .880), DIVIDER PLATE | |
6. | 19437 3 | [1] | TERMINAL BLOCK (3 TERMINALS) | |
7. | 90192 | [2] | SCREW, (.250-20 x .750), TERMINAL BLOCK | |
8. | 68729 | [1] | COVER, RELIEF VALVE | |
9. | 45076 | [3] | NUT, (#10-32), TERMINAL BLOCK |