Parts on group GEAR HOUSING(DRIVE SHAFT).178:1 GEAR RATIO 4.25" TORPEDO DIA:
Pos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
-. | 815791A92 | [1] | ENGINE GASKET SET | |
-. | 96148A 5 | [1] | WATER PUMP REPAIR KIT | |
-. | 89238A 2 | [1] | SEAL KIT | |
1. | 814247A 1 | [1] | GEAR HOUSING, Basic Black | |
1. | 814247A 2 | [1] | GEAR HOUSING , Basic Gray | |
10. | 67892 | [1] | SCREW, Magnetic, Drain | |
11. | 815168 | [1] | DRIVESHAFT | |
12. | N.S.S. | [1] | Not Sold Seperate, Pinion Gear (Part Of 43- 16279A 2) | |
13. | 19183 | [2] | WASHER, Fiber | |
14. | 826375 | [1] | NUT, (.625-18) | |
15. | 42637A 1 | [0] | SHIM SET | |
16. | 36387A 1 | [1] | BEARING, Roller | |
17. | 824519 | [1] | RETAINER | |
18. | 42579A 3 | [1] | WATER PUMP BASE ASSEMBLY | |
19. | 42631 1 | [1] | GASKET | |
2. | 85822A10 | [1] | CONNECTOR ASSEMBLY | |
20. | 90011 | [1] | O-RING, (2.175 x .175) | |
21. | 89238 | [1] | OIL SEAL | |
22. | 16977 | [1] | OIL SEAL | |
23. | 85608 1 | [1] | GASKET, Lower | |
24. | 85609 1 | [1] | GASKET, Upper | |
25. | 32435 | [1] | FACE PLATE | |
26. | 96148A 1 | [1] | WATER PUMP BODY ASSEMBLY | |
27. | 48752 | [1] | INSERT | |
28. | 38970 | [1] | SEAL, Rubber | |
29. | 89984 1 | [1] | IMPELLER | |
2A. | 43998 | [1] | SLEEVE, Old Design | |
3. | 43044 | [2] | PIN, Dowel - Without Hole (.375 x .625) | |
30. | 56654 | [1] | KEY | |
31. | 96411 | [1] | SCREW, (#14-8 x 2.25) | |
32. | 29245 | [2] | WASHER, (.281 x .500 x .060) | |
33. | 13438 | [2] | NUT, (.250-28) | |
34. | 36001 | [1] | WASHER | |
35. | 13436 | [1] | NUT | |
37. | 29804 | [1] | SLEEVE | |
38. | 815264 1 | [1] | SHIFT SHAFT | (Use With Out E-Ring) |
38. | 815264 | [1] | SHIFT SHAFT | (Use With E-Ring) |
39. | 29641 | [1] | E RING | |
4. | 78638 | [1] | STUD, (.438 x 3.12) | |
40. | 25439 | [1] | O-RING, (.862 x .103) | |
41. | 77631A 2 | [1] | BUSHING ASSEMBLY | |
42. | 816464 1 | [1] | SEAL, Oil | |
43. | 77674 | [1] | WASHER, Rubber - Shift Shaft Bushing | |
5. | 57920 | [2] | STUD, (.44 x 2.06) | |
6. | 56297 | [1] | STUD, (.312 x 3.38) | |
7. | 30667 | [2] | STUD, (.250-20/.250-28 x 3.125) | |
8. | 35934A 1 | [1] | BEARING ASSEMBLY, Roller | |
9. | 79953 | [1] | SCREW, (.375-16 x .250), Greese Filler |