Parts on group REED BLOCK AND CYLINDER HEAD:
Pos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
-. | 815791A92 | [1] | ENGINE GASKET SET | |
1. | 18488 8 | [2] | CYLINDER HEAD (Casting #18488C3) | (200) SN# 0D262673 & Below |
1. | 18488 9 | [2] | HEAD (Casting #18488C2) | (200XL/CXL) SN# 0D246107 THRU 0G052594 |
1. | 18488F 1 | [2] | HEAD, Cylinder (Cast #18488C4) | (200) SN# D26674 THRU G052594 |
1. | 18488F 2 | [2] | HEAD, Cylinder (Casting #18488C5) | (200) SN# G052595 & Up |
10. | 77653 77 | [1] | HOSE, (24.500 Inches Bulk) | |
11. | 68728 | [1] | FITTING | |
12. | 816311 | [0] | TIE STRAP, (8.00 Inches) | |
13. | 63779 | [4] | PIN, Dowel (.250 x .625) | |
14. | 13715 1 | [2] | RETAINER | |
15. | 98257 | [2] | SCREW, (.312-18 x .500) | |
16. | 55715 | [6] | SCREW, (.250-20 x .880) | |
16. | 90197 | [6] | SCREW, (.250-20 x 1.125) | |
17. | 16737 1 | [1] | GASKET | |
18. | 17735A 2 | [1] | ADAPTOR PLATE | |
19. | 96183 2 | [12] | REED CLAMP | |
2. | 822844 1 | [2] | GASKET | |
20. | 14697 2 | [1] | GASKET | |
21. | 75953 | [6] | REED BLOCK | |
22. | 75362A 1 | [6] | REED ASSEMBLY | |
23. | 28668 | [8] | SCREW, (.250-20 x .875) | |
24. | 823588 | [60] | SCREW, (#8-32 x .250) | |
25. | 825164A 1 | [1] | DETONATION SENSOR | Black (200) SN# D239647 & Below |
25. | 825164 | [1] | DETONATION SENSOR | Gray (200) SN# D239648 THRU G146482 |
25. | 826858 | [1] | KNOCK SENSOR | (200) SN# G146483 & Up |
26. | 97465 | [1] | TEMPERATURE SENDER, Starboard | |
27. | 13536A 6 | [1] | TEMPERATURE SENSOR, Port (4-Wire) | |
28. | 45076 | [1] | NUT, (#10-32) | |
29. | 55098 | [1] | J CLIP | |
3. | 98534 | [23] | SCREW, (.375-16 x 2.30) | (QTY. OF 24 ON 150/175) |
3. | 13450 | [1] | SCREW, (.375-16 x 2.30) | (200) SN# G146482 & Below |
3. | 827426 | [1] | SCREW | (200) SN# G146483 & Up |
4. | 25909 | [24] | WASHER, (.406 x .812 x .065), Use Where Applicable | |
5. | 75692 | [2] | THERMOSTAT | |
6. | 62386 | [2] | GASKET | |
7. | 90390A 1 | [2] | COVER KIT | |
8. | 35386 | [4] | SCREW, (.312-18 x 1.00) | |
9. | 68727 | [1] | FITTING, (.250-18) 90 Degree - Brass |