1150453JD
ELPTO
1990
REED BLOCK AND CYLINDER HEAD
Parts on group REED BLOCK AND CYLINDER HEAD:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| -. | 11338A88 | [1] | GASKET SET, Engine Overhaul | |
| -. | 815791A90 | [1] | GASKET SET | (135/150) |
| -. | 815809A90 | [1] | GASKET SET | (XR4/Magnum II/175) |
| -. | 815810A90 | [1] | GASKET SET | (200) |
| 1. | 15221A 1 | [2] | CYLINDER HEAD | |
| 1. | 18787 3 | [2] | CYLINDER HEAD | (135/150) |
| 1. | 18789 3 | [2] | CYLINDER HEAD | (XR4/MAGNUM II/175) |
| 1. | 18488 3 | [2] | CYLINDER HEAD | (200) |
| 10. | 68728 | [1] | FITTING, THERMOSTAT COVER TO WATER HOSES | |
| 10. | 77653 77 | [3] | HOSE, (24.500 Inches Bulk) | |
| 11. | 90077 | [0] | STA STRAP, WATER HOSES | |
| 11. | 68728 | [1] | FITTING | |
| 12. | 97465 | [1] | TEMPERATURE SENDER (STARBOARD) | |
| 12. | 816311 | [0] | CABLE TIE, (8.00 Inches) | |
| 13. | 75692 | [2] | THERMOSTAT | |
| 13. | 97465 | [1] | TEMPERATURE SENDER (STBD.) | |
| 14. | 13536A 7 | [1] | TEMPERATURE SENSOR (PORT) | |
| 14. | 43517A 6 | [1] | ADAPTOR PLATE (135/150/XR4/MAGNUM II/175) | |
| 14. | 87628A 7 | [1] | ADAPTOR PLATE (200) | |
| 15. | 13715 | [2] | RETAINER, SENSOR AND SENDER | |
| 15. | 28668 | [8] | SCREW, (.250-20 x .875) | |
| 16. | 98257 | [2] | SCREW, (.312-18 x .500), RETAINER | |
| 16. | 14697 2 | [1] | GASKET (135/150/XR4/MAGNUM II/175) | |
| 16. | 813859 | [1] | GASKET (200) | |
| 17. | 99747A 9 | [1] | HOUSING, REED BLOCK | |
| 17. | 16483 | [4] | PIN, Dowel (3/4") | |
| 17. | 63779 | [4] | PIN, Dowel (.250 x .625) | |
| 18. | 24878 | [1] | SCREW, (.250-20 x 1.25), REED BLOCK HOUSING | |
| 18. | 69093 | [8] | SCREW, (.25-20 X 1.50), REED BLOCK HOUSING | |
| 18. | 69067 | [1] | SCREW, (.25-20 X 1.375), REED BLOCK HOUSING | |
| 18. | 75953 | [6] | REED BLOCK | (135/150/MAGNUM II/175) |
| 18. | 87692 | [6] | REED BLOCK | (200) |
| 19. | 93536 1 | [1] | GASKET, REED BLOCK HOUSING | |
| 19. | 75362A 1 | [6] | REED ASSEMBLY | (135/150/MAGNUM II/175) |
| 19. | 19719A 1 | [6] | REED ASSEMBLY | (200) |
| 2. | 41246 | [2] | GASKET, CYLINDER COVER | |
| 2. | 18785 1 | [2] | GASKET | (135/150)(Component of Powerhead)(Head Gasket not included in Engine Gasket Set) |
| 2. | 18786 1 | [2] | GASKET | (XR4/MAGNUM II/175)(Component of Powerhead)(Head Gasket not included in Engine Gasket Set) |
| 2. | 18472 1 | [2] | GASKET | (20)(Component of Powerhead)(Head Gasket not included in Engine Gasket Set) |
| 20. | 65744 | [6] | GASKET, REED BLOCK | |
| 20. | 96183 2 | [12] | REED CLAMP | (135/150/MAGNUM II/175) |
| 20. | 90391 1 | [12] | REED CLAMP | (200) |
| 21. | 75953 | [6] | REED BLOCK | |
| 21. | 14783 | [60] | SCREW, (8-32 x .187) (QTY. OF 84 ON 200) | |
| 22. | 75362A 1 | [6] | REED ASSEMBLY | |
| 22. | 21558 | [6] | SCREW, (.250-20 x .75) | (135/150/MAGNUM II) |
| 22/23. | 28668 | [12] | SCREW, (.250-20 x .875) | (200) |
| 23. | 96183 | [12] | REED CLAMP | |
| 23. | 96529 | [6] | SCREW, (.250-20 x 2.00) | (135/150/MAGNUM II) |
| 24. | 57583 | [60] | SCREW, (#8-32 x .375), REED TO REED BLOCK | |
| 24. | 814612 | [1] | THERMAL AIR VALVE | |
| 25. | 65746 | [12] | SCREW, (.250-20 x .750), REED BLOCK ATTACHING | |
| 25. | 23567 | [1] | CLIP (9/16") | |
| 25. | 26404 | [1] | CLAMP (1") | |
| 26. | 27037 | [12] | STUD, (.250-28 x 1.125), CARBURETOR MOUNTING | |
| 26. | 69205 | [1] | C WASHER | |
| 27. | 42658 | [5] | CHECK VALVE, BLEED HOSE TO REED BLOCK HOUSING | |
| 27. | 69079 | [1] | SCREW, (#10-16 x .440) | |
| 28. | 15133 | [5] | FITTING, BLEED HOSE TO CYLINDER BLOCK (90 DEG.) | |
| 28. | 13536A 7 | [1] | TEMPERATURE SENSOR (PORT) | |
| 29. | 99130122 | [1] | TUBING, (20.00 Feet Bulk), BLEED LINE | |
| 29. | 13715 | [2] | RETAINER | |
| 3. | 98534 | [24] | SCREW, (.375-16 X 2.30) | |
| 30. | 42657A 1 | [1] | CHECK VALVE | |
| 30. | 98257 | [2] | SCREW, (.312-18 x .500) | |
| 31. | 65857 | [1] | CONNECTOR, BLEED HOSE (PRESS-IN) | |
| 31. | 56759 | [5] | FITTING, Press-In | |
| 32. | 64871A 2 | [1] | CHECK VALVE | |
| 32. | 99130122 | [1] | TUBING, (20.00 Feet Bulk) | |
| 33. | 23567 | [1] | CLIP (9/16") | |
| 33. | 26404 | [1] | CLAMP (1") | |
| 33. | 42698 | [7] | CHECK VALVE (PRESS-IN 13/16") | |
| 33. | 42623 | [1] | CHECK VALVE (PRESS-IN 11/16") | |
| 34. | 69079 | [2] | SCREW, (#10-16 x .440), CLIP | |
| 34. | 15133 | [6] | FITTING (PRESS-IN) | |
| 35. | 69205 | [2] | C WASHER | |
| 36. | 64705 | [1] | FITTING | |
| 4. | 25909 | [24] | WASHER, (.406 x .812 x .065) | |
| 5. | 62386 | [2] | GASKET | |
| 6. | 90390A 1 | [2] | COVER KIT | |
| 7. | 35386 | [4] | SCREW, (.312-18 x 1.00), THERMOSTAT COVER | |
| 7. | 75692 | [2] | THERMOSTAT | |
| 8. | 68727 | [1] | FITTING, (.250-18) Brass, ELBOW - WATER HOSES | |
| 8. | 35386 | [4] | SCREW, (.312-18 x 1.00) | |
| 9. | 77653 77 | [2] | HOSE, (24.500 Inches Bulk), WATER DISTRUBUTION | |
| 9. | 68727 | [1] | FITTING, (.250-18 Brass) |
Parts catalog :
POWER TRIM PUMP(USE WITH DESIGN I POWER TRIM PUMP)
POWER TRIM PUMP
POWER TRIM MOTOR(USE WITH DESIGN II POWER TRIM SYSTEM)
POWER TRIM COMPONENTS(DESIGN II)
POWER TRIM COMPONENTS(DESIGN I)
POWER TRIM COMPONENTS
SERVICE-SUPPORT MATERIAL
STARTER MOTOR ASSEMBLY
STEERING ATTACHING KIT(XR4- MAGNUM II)
SWIVEL BRACKET AND STEERING ARM
SWIVEL BRACKET(CASTING #1499-8710-6)
SWIVEL BRACKET(CASTING #1499-8710-7)