1175412BD, 1175422BD, 1175620, 1175626, 1175627, 1175628, 1175629, 1175640, 1175646, 1175647, 1175648, 1175649, 1175725, 1175726, 1175745, 1175746
ELPT
1976,1977,1978,1979,1980,1985,1986,1988
Parts on group GEAR HOUSING(DRIVE) 2:1 RATIO-14 TEETH PINION GEAR:
Pos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
 . | 9148A18 | [1] | GEAR HOUSING | (LONG)(BLACK) |
 . | 9148A20 | [1] | GEAR HOUSING | (LONG)(GRAY) |
 . | 9148A19 | [1] | GEAR HOUSING | (X-LONG )(BLACK) |
 . | 9148A21 | [1] | GEAR HOUSING | (X-LONG )(GRAY) |
-. | 89238A 2 | [1] | SEAL KIT | |
-. | 96148A 5 | [1] | WATER PUMP REPAIR KIT | |
-. | [1] | |||
-. | 11338A88 | [1] | GASKET SET, Engine Overhaul | SN# 6618751 & Up |
-. | 79583A81 | [1] | GASKET SET | SN# 5875204 THRU 6618750 |
-. | NLA | [1] | No Longer Available, Gasket Set | (Service Bulletin 81-8) SN# USA-5875203/AUS-8072022 & Below |
1. | NLA | [1] | No Longer Available, Gear Housing-Basic | (Casting #1647-7223 or 1647-6463) |
1. | 9148A11 | [1] | GEAR HOUSING ASSEMBLY | (BASIC)(BLACK) |
1. | 7321A11 | [1] | GEAR HOUSING | (BLACK)(Casting #1647-6670C) |
1. | 9148A12 | [1] | GEAR HOUSING ASSEMBLY | (BASIC)(GRAY) |
1. | 7350A 4 | [1] | GEAR HOUSING | (BLACK)(Casting #1647-8875C) |
1. | 7350A62 | [1] | GEAR HOUSING | (GRAY) |
10. | 30667 | [2] | STUD, (.250-20/.250-28 x 3.125) | |
11. | 44000 1 | [1] | DRIVESHAFT | (LONG) |
11. | 44209 1 | [1] | DRIVESHAFT | (X-LONG) |
11. | 35934A 1 | [1] | ROLLER BEARING | |
12. | NSS | [1] | NOT SOLD SEPARATE | (Part of 43-44102A2) |
12. | 98621 | [1] | SCREW, (.375-16 X .75) | |
13. | 92721 | [1] | WASHER | |
13. | 98682A 1 | [1] | DRIVESHAFT | (LONG) |
13. | 41509A 2 | [1] | DRIVESHAFT | (X-LONG) |
14. | 35921 | [1] | NUT, (.625-18) | |
14. | 34576 | [1] | SPRING | |
15. | 42637A 1 | [0] | SHIM SET | |
15. | 30545 | [1] | PIN | |
16. | 36387A 1 | [1] | BEARING, Roller | |
16. | 78081 | [1] | PINION GEAR | (Stamped 43-78081) |
16. | 67885 | [1] | PINION GEAR | (Stamped 43-67885) |
17. | 42633 | [1] | NUT | |
17. | 35921 | [1] | NUT, (.625-18) | |
18. | 42579A 3 | [1] | WATER PUMP BASE ASSEMBLY | |
18. | 57007A 1 | [0] | SHIM | |
19. | 42631 1 | [1] | GASKET | |
19. | 53079A 1 | [1] | TAPERED ROLLER BEARING ASSEMBLY | |
2. | 85822A 1 | [1] | CONNECTOR ASSEMLBY | |
20. | 90011 | [1] | O-RING, (2.175 x .175) | |
20. | 85610 1 | [1] | GASKET | |
21. | 89238 | [1] | OIL SEAL | |
21. | 33145 | [1] | O-RING, (1.984 x .139) | |
22. | 16977 | [1] | OIL SEAL | |
22. | 96146A 6 | [1] | WATER PUMP BASE | |
23. | 85608 1 | [1] | GASKET, LOWER | |
23. | 89238 | [1] | OIL SEAL | |
24. | 85609 1 | [1] | GASKET, UPPER | |
24. | 16977 | [1] | OIL SEAL | |
24A. | 35973 | [1] | PIN, Dowel | |
25. | 32435 | [1] | FACE PLATE | |
25. | 85608 1 | [1] | GASKET | |
26. | 96148A 1 | [1] | WATER PUMP BODY ASSEMBLY | |
26. | 32435 | [1] | FACE PLATE | |
27. | 48752 | [1] | INSERT | |
27. | 85609 1 | [1] | GASKET | |
28. | 38970 | [1] | SEAL, RUBBER | |
28. | 96148A 1 | [1] | WATER PUMP BODY ASSEMBLY | |
29. | 89984 | [1] | IMPELLER | |
29. | 48752 | [1] | INSERT | |
3. | 20033 | [2] | PIN, Dowel | |
3. | 66885 | [1] | INSERT | (STBD)(Use where Applicable) |
3. | 66884 | [1] | INSERT | (PORT)(Use where Applicable) |
30. | 56654 | [1] | KEY | |
30. | 38970 | [1] | SEAL | |
31. | 96411 | [1] | SCREW, (#14-8 x 2.25) | |
31. | 89984 | [1] | IMPELLER | |
32. | 29245 | [2] | WASHER, (.281 x .500 x .060) | |
32. | 56654 | [1] | KEY | |
33. | 13438 | [2] | NUT, (.250-28) | |
33. | 30720 | [1] | SCREW, (.250-20 x 2.25) | |
34. | 36001 | [1] | WASHER | |
34. | 29245 | [3] | WASHER, (.281 x .500 x .060) | |
35. | 13436 | [1] | NUT | |
35. | 35888 | [2] | NUT, (.250-28) | |
36. | 30271 | [1] | RING | (Use where Applicable) |
36. | 36001 | [1] | WASHER | |
37. | 29804 | [1] | SLEEVE | |
37. | 35814 | [1] | NUT, (.312-24) | |
38. | 78902 | [1] | SHAFT, LOWER | |
38. | 30271 | [1] | RING | |
39. | 29641 | [1] | E-RING | |
39. | 29804 | [1] | SLEEVE | |
4. | 78638 | [1] | STUD, (.438 x 3.12) | (LONG) |
4. | 18978 | [1] | STUD, (.438 x 3.69) | (X-LONG) |
4. | 76156 | [1] | SCREW, (#10-32 X 1.88) | (Use where Applicable) |
40. | 78907 | [1] | RETAINING RING | (Use where Applicable) |
40. | 76041 | [1] | LOWER SHIFT SHAFT | |
40. | 78902 | [1] | SHAFT | (Hsg. Casting #1647-8675C ONLY) |
41. | 25439 | [1] | O-RING, (.862 x .103) | |
41. | 29641 | [1] | E-RING | |
42. | 77631A 2 | [1] | BUSHING ASSEMBLY | |
42. | 78907 | [1] | RETAINING RING | |
43. | 816464 | [1] | OIL SEAL | |
43. | 25439 | [1] | O-RING, (.862 x .103) | |
44. | 77674 | [1] | WASHER, RUBBER | |
44. | 77631A 2 | [1] | BUSHING ASSEMBLY | |
45. | 79953 | [1] | SCREW, (.375-16 x .250), GREASE FILLER | |
45. | 816464 | [1] | OIL SEAL | |
46. | 67892 | [1] | SCREW, Magnetic, DRAIN | |
46. | 77674 | [1] | WASHER | |
47. | 19183 | [2] | WASHER, Fiber | |
47. | 79953 | [1] | SCREW, (.375-16 x .250) | |
48. | 67892 | [1] | SCREW, Magnetic | |
49. | 19183 | [2] | WASHER, Fiber | |
5. | 57920 | [2] | STUD, (.44 x 2.06) | |
5. | 45812 | [1] | NUT, (#10-32) | (Use where Applicable) |
6. | 56297 | [1] | STUD, (.312 x 3.38) | |
6. | 20033 | [2] | PIN, Dowel | |
7. | 30667 | [2] | STUD, (.250-20/.250-28 x 3.125) | |
7. | 78638 | [1] | STUD, (.438 x 3.12) | (LONG) |
7. | 57921 | [1] | STUD, (.437-14 x 4.00) | (LONG) |
7. | 78639 | [1] | STUD | (8-1/8" - X-LONG) |
7. | 74731 | [1] | STUD | (9" - X-LONG) |
8. | 42647A 1 | [1] | BEARING ASSEMBLY, Roller | |
8. | 57920 | [2] | STUD, (.44 x 2.06) | (LONG) |
8. | 74730 | [2] | STUD | (7-1/16" - X-LONG) |
9. | 43998 | [1] | SLEEVE | |
9. | 56297 | [1] | STUD, (.312 x 3.38) |