DT20ESB
1977
Clamp Bracket
Parts on group Clamp Bracket:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1-1. | 41111-93003-01J | [1] | Bracket, clamp right hand side | to 41111-93004-01J |
| 1-2. | 41111-93004-01J | [1] | Bracket, clamp right hand side | |
| 10. | 09200-12001 | [1] | Pin, tilt stopper | Outside diameter: 12 |
| 11. | 09300-12009 | [1] | Bushing | 12x15x20 |
| 12. | 41311-93000 | [1] | Plate, clamp bracket | |
| 13. | 09126-06001 | [2] | Screw | 6x12 |
| 14. | 09100-10086 | [1] | Bolt | 10x175 |
| 15. | 09306-11002 | [2] | Bushing, swivel bracket | |
| 16. | 09160-10040 | [2] | Washer, swivel bracket | 10.5x18x1.6 |
| 17. | 09140-10015 | [1] | Nut, swivel bracket | |
| 18. | 45420-93000 | [1] | Pin, tilt lock | |
| 19. | 09441-17001 | [1] | Spring, tilt lock pin | |
| 2-1. | 41121-93002-01J | [1] | Bracket, clamp left hand side | to 41121-93003-01J |
| 2-2. | 41121-93003-01J | [1] | Bracket, clamp left hand side | to 41121-93004-01J |
| 2-3. | 41121-93004-01J | [1] | Bracket, clamp left hand side | |
| 20. | 09100-08111 | [2] | Bolt, transom | 8x90 |
| 21. | 09160-08014 | [2] | Washer, transom 2 | 8.5x23x1.5 |
| 22. | 09162-08003 | [2] | Lock Washer | |
| 23. | 09140-08003 | [2] | Nut, transom | |
| 3. | 41212-93000-01J | [2] | Handle, clamp | |
| 4-1. | 41211-93000 | [2] | Screw, clamp | Length: 78 |
| 4-2. | 41211-93700 | [2] | Screw, clamp | "Length: 90, Optional" |
| 4-3. | 41211-93710 | [2] | Screw, clamp | "Length: 68, Optional" |
| 5. | 09205-06007 | [2] | Pin, clamp handle | |
| 6. | 41213-93000 | [2] | Plate, clamp | |
| 7. | 09380-07001 | [2] | Ring, clamp plate | |
| 8. | 41221-93001 | [1] | Knob, tilt stopper | |
| 9. | 09205-03015 | [1] | Pin, tilt stopper knob | Length: 18 |
Parts catalog :
Carburetor
Clutch Lever
Crankshaft
Cylinder
Drive Shaft Housing
Electrical
Electrical 1