DT25MLT
1980
Crankshaft
Parts on group Crankshaft:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 12110-93302 | [2] | Piston, Standard | |
| 10. | 09381-16001 | [4] | Circlip, piston pin | |
| 11. | 09263-16015 | [2] | Bearing, piston pin | |
| 12-1. | 12200-93832 | [1] | Crankshaft Set | |
| 12-2. | 12200-93401 | [1] | Crankshaft Set | to 12200-93832 |
| 13. | 12161-93401 | [2] | Rod, connecting | |
| 14. | 12211-93001 | [2] | Pin, crank | |
| 15. | 09263-22027 | [2] | Bearing, crank pin | 22x29x16 |
| 16. | 09160-22010 | [4] | Thrust Washer | 22x35x1 |
| 17. | 12221-93002 | [1] | Crankshaft, upper | |
| 18. | 12231-93001 | [1] | Crankshaft, middle | |
| 19. | 12232-93001 | [1] | Crank Wheel | |
| 2. | 12110-93302-025 | [2] | Piston, Over Size: 0.25 | Optional |
| 20. | 12240-93400 | [1] | Crankshaft, lower | |
| 21. | 09262-25054 | [2] | Bearing | 25x62x17 |
| 22. | 09262-25033 | [1] | Bearing | 25x62x17 |
| 23. | 09289-25009 | [1] | Oil Seal | 25x62x8x10 |
| 24. | 09390-52004 | [1] | C Ring | |
| 25. | 09283-25035 | [1] | Oil Seal, upper crank shaft | 25x40x7 |
| 26. | 09181-50004 | [3] | Shim | 50x61x0.5 |
| 27. | 09283-25070 | [1] | Oil Seal, lower crankshaft | "from 09283-25031, 25x38x8" |
| 3. | 12110-93302-050 | [2] | Piston, Over Size: 0.5 | Optional |
| 4. | 12110-93350 | [2] | Piston | "Optional, for hightension ring" |
| 5. | 12140-93301 | [2] | Ring Set, Standard | |
| 6. | 12140-93301-025 | [2] | Ring Set, Over Size: 0.25 | Optional |
| 7. | 12140-93301-050 | [2] | Ring Set, Over Size: 0.5 | Optional |
| 8. | 12140-93350 | [2] | Ring Set | "Optional, for hightension ring" |
| 9. | 12151-93300 | [2] | Pin, piston |
Parts catalog :
Clutch
Clamp Bracket
Carburetor
Cylinder
Drive Shaft Housing
Electrical
Electrical 1
Electrical 2
Engine Cover