DT28J
1981
Clamp Bracket
Parts on group Clamp Bracket:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1-1. | 41111-93004-01J | [1] | Bracket, clamp Right hand side | "to 41111-93005-01J, mark S" |
| 1-2. | 41111-93005-01J | [1] | Bracket, clamp Right hand side | |
| 1-3. | 41110-93400-01J | [1] | Bracket, clamp Right hand side | |
| 10. | 09300-12009 | [1] | Bushing | 12x15x20 |
| 11. | 41311-93000 | [1] | Plate, clamp bracket | |
| 12. | 09126-06001 | [2] | Screw 6x12 | |
| 13. | 09100-10086 | [1] | Bolt 10x175 | |
| 14. | 09306-11002 | [2] | Bushing, bracket | |
| 15. | 09160-10040 | [2] | Washer 10.5x18x1.6 | |
| 16. | 09140-10015 | [1] | Nut, swivel bracket | |
| 17. | 45420-93000 | [1] | Pin, tilt lock | |
| 18. | 09441-17001 | [1] | Spring, tilt lock pin | |
| 2-1. | 41121-93004-01J | [1] | Bracket, clamp Left hand side | mark S |
| 2-2. | 41121-93005-01J | [1] | Bracket, clamp Left hand side | |
| 2-3. | 41120-93400-01J | [1] | Bracket, clamp Left hand side | |
| 3. | 41212-93000-01J | [2] | Handle, clamp | |
| 4-1. | 41211-93001 | [2] | Screw, clamp | Length: 78 |
| 4-2. | 41211-93701 | [2] | Screw, clamp | "Length: 90, Optional" |
| 4-3. | 41211-93711 | [2] | Screw, clamp | "Length: 68, Optional" |
| 5. | 09205-06007 | [2] | Pin, clamp handle | |
| 6. | 41213-93001 | [2] | Plate, clamp | |
| 7. | 41221-93001 | [1] | Knob, tilt stopper | |
| 8. | 09205-03015 | [1] | Pin, tilt stopper knob | Length:18 |
| 9. | 09200-12001 | [1] | Pin, tilt stopper | Outside diameter: 12 |
Parts catalog :
Carburetor
Clutch
Crankshaft
Cylinder
Drive Shaft Housing
Electrical
Electrical 1