DT2E
1984
GEAR CASE
Parts on group GEAR CASE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 52111-98420-0ED | [1] | DRIVE SHAFT HOUSING | |
| 10. | 08221-22284 | [2] | SHIM | Thickness: 0.2 / As Required |
| 11. | 08221-22285 | [1] | SHIM | Thickness: 0.5 / As Required |
| 12. | 08331-4128A | [1] | CIRCLIP | |
| 13. | 09289-12002 | [1] | OIL SEAL | |
| 14. | 09181-20130 | [1] | SHIM | Thickness: 0.5 |
| 15. | 09320-20009 | [1] | BUSHING | |
| 16. | 57151-98400 | [1] | DRIVE SHAFT SEAL PIPE | |
| 17. | 09108-06062 | [1] | STUD BOLT | |
| 18. | 09206-09007 | [1] | PIN | |
| 19. | 09162-06006 | [1] | LOCK WASHER | |
| 2. | 09100-06122 | [6] | BOLT | |
| 20. | 09140-06020 | [2] | NUT 6MM | |
| 21. | 09108-06063 | [1] | STUD BOLT | 6x12 |
| 22. | 09206-09001 | [1] | PIN | |
| 23. | 55112-98401-0ED | [1] | GEAR CASE COVER | |
| 24. | 09160-06082 | [1] | WASHER | 6.5x13x1.0 |
| 25. | 09248-10008 | [1] | DRAIN PLUG | |
| 26. | 09168-10022 | [1] | DRAIN PLUG GASKET | |
| 27. | 63211-98400 | [1] | HANDLE GRIP | |
| 28. | 63111-98403-0ED | [1] | TILLER HANDLE | |
| 29. | 09160-08081 | [1] | WASHER | 8.5x23x1.5 |
| 3. | 09162-06006 | [6] | LOCK WASHER | |
| 30. | 09164-10006 | [2] | WASHER | |
| 31. | 09111-08049 | [1] | BOLT | |
| 32. | 09306-10009 | [1] | HANDLE BUSHING | |
| 33. | 52120-98400-0ED | [1] | HANDLE ATTACHMENT SET | Optional |
| 34. | 55300-98400 | [1] | ZINC ANODE | Optional |
| 4. | 09160-06082 | [6] | WASHER | 6.5x13x1.0 |
| 5. | 55110-98402-02M | [1] | GEAR CASE HOUSING | |
| 6. | 09262-10015 | [2] | BEARING | 10x26x8 |
| 7. | 09180-19004 | [1] | SPACER | |
| 8. | 09262-12001 | [1] | BEARING | 12x28x8 |
| 9. | 08221-22283 | [2] | SHIM | Thickness: 0.1 / As Required |
Parts catalog :
FUEL TANK
ENGINE COVER
ELECTRICAL
CYLINDER
CRANKSHAFT
CLAMP BRACKET
OPTIONAL
STARTER
TRANSMISSION
WATER PUMP