Parts on group Lower Gear Unit AQ Drive Unit 100B:
Pos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 832145 | [1] | Lower gear | |
2. | 832147 | [1] | Housing | |
3. | 832148 | [1] | Bearing housing | |
4. | 18559 | [1] | Ball bearing | |
5. | 806655 | [1] | Shaft | |
6. | 914459 | [1] | Snap ring | |
7. | 26413 | [1] | Shim | TH=0.1mm |
7. | 26411 | [1] | Shim | TH=1.0mm |
8. | 806620 | [1] | Roller bearing | |
9. | 804303 | [1] | Adjusting washer | TH=0,05mm |
9. | 34615 | [1] | Shim | TH=0.1mm |
10. | 181288 | [1] | Needle bearing | |
11. | 806625 | [1] | Drive gear set | |
12. | 191573 | [1] | Lock washer | |
13. | 955852 | [1] | Hexagon nut | |
14. | 875177 | [1] | Propeller shaft | |
15. | 181413 | [1] | Needle bearing | |
16. | 192365 | [1] | Snap ring | |
17. | 832966 | [1] | Guard plate | |
18. | 804278 | [1] | Set screw | |
19. | 909306 | [1] | Flat key | |
20. | 906634 | [1] | Round nut | |
21. | 907024 | [1] | Lock washer | |
22. | 804217 | [1] | Nut | |
23. | 950331 | [1] | Screw | |
24. | 940155 | [1] | Toothed washer | |
25. | 181286 | [1] | Ball bearing | |
26. | 804303 | [1] | Adjusting washer | TH=0,05mm |
26. | 34615 | [1] | Shim | TH=0.1mm |
27. | 875810 | [1] | Zinc ring kit | (804417) |
28. | 940203 | [2] | Screw | |
29. | 804209 | [2] | Sealing ring | |
30. | 925257 | [2] | O-ring | |
31. | 191544 | [2] | Stud | |
32. | 804326 | [2] | Cap nut | |
33. | 804395 | [2] | Striker plate | |
34. | 804262 | [1] | Plug | |
35. | 804261 | [1] | Gasket | |
36. | 806660 | [1] | Spinner | |
37. | 806661 | [1] | Safety pin | |
38. | 946713 | [1] | Split pin | |
39. | 806675 | [1] | Wear washer | |
40. | 804266 | [1] | Gasket | Included in AQ drive unit 832120. |
41. | 804255 | [1] | Guide ring | Included in AQ drive unit 832120 |
42. | 940171 | [9] | Hexagon screw | Included in AQ drive unit 832120 |
43. | 875121 | [1] | Splined sleeve | Included in AQ drive unit 832120 |
44. | 914507 | [1] | Snap ring |