0435732 FUEL MANIFOLD EVINRUDE
BE200CXECM, BE200CXEDR, BE200CXEUA, BE225CXECS, BE225CXEDE, BE225CXEUD, E185ESERK, E185ESXETA, E200CXARC, E200CXATF, E200CXEOC, E200WPXEEN, E200WPXSIF, E200WPXSSC, E225CXARC, E225CXATF, E225CXEOB, E250CXECD, SE200WTPLA, SE200WTPLG, SE200WTPLS
FUEL
Price: query
Rating:
Number on catalog scheme: 55
Compatible models:
BRP EVINRUDE entire parts catalog list:
- INTAKE MANIFOLD » 0435732
BE200CXEUA, BE200TXEUA, E200CXEUA, E200STLEUB, E200TXEUA 1997
BE225CXECS, BE225SLECS, BE225TXECS, E225CXECS, E225CZECS, E225STLECS, E225TXECS, E225TZECS, SE225GLECC, SE225NXECC, SE225NZECC, SE225QXECC, SE225QZECC 1998
BE225CXEDE, BE225PXEDE, BE225SLEDE, BE225TXEDE, E225CXEDE, E225CZEDE, E225PXEDE, E225STLEDE, E225TXEDE, E225TZEDE 1996
BE225CXEUD, BE225SLEUD, BE225TXEUD, E225CXEUD, E225CZEUD, E225STLEUD, E225TXEUD, E225TZEUD 1997
E185ESERK 1994
E185ESXETA, E185ESXETF 1993
E200CXARC, E200CXARK, E200CXERK, E200CXERS, E200CZARK, E200CZERK, E200CZERS, E200STLERK, E200STLERR, E200TXARC, E200TXARK, E200TXERK, E200TXERS, E200TZARK, E200TZERK, E200TZERS 1994
E200CXATF, E200CXATS, E200CXETD, E200CXETF, E200CZATF, E200CZATS, E200CZETD, E200CZETF, E200STLETC, E200STLETF, E200TXATF, E200TXATS, E200TXETD, E200TXETF, E200TZATF, E200TZATS, E200TZETD, E200TZETF, VE200SLETC, VE200SLETF, VE200TXETD, VE200TXETF, VE200TZETD, VE200TZETF 1993
E200CXEOC, E200CZEOC, E200STLEOA, E200TXEOC, E200TZEOC, LE200SLEOC 1995
E200WPXEEN, E200WPXEES 1999
E200WPXSIF 2001
E200WPXSSC 2000
E225CXARC, E225CXARK, E225CXERK, E225CXERM, E225CZARK, E225CZERK, E225CZERM, E225PLERK, E225PLERM, E225PXARC, E225PXARK, E225PXERK, E225PXERM, E225PZARK, E225PZERK, E225PZERM, E225STLERC, E225STLERK, E225TLERK, E225TLERM, E225TXARC, E225TXARK, E225TXERK, E225TXERM, E225TZARK, E225TZERK, E225TZERM 1994
E225CXATF, E225CXATS, E225CXETA, E225CXETF, E225CZATF, E225CZATS, E225CZETA, E225CZETF, E225PLETA, E225PLETF, E225PXATF, E225PXATS, E225PXETA, E225PXETF, E225PZATF, E225PZATS, E225PZETA, E225PZETF, E225STLETF, E225TLETA, E225TLETF, E225TXATF, E225TXATS, E225TXETA, E225TXETF, E225TZATF, E225TZATS, E225TZETA, E225TZETF, VE225PLETA, VE225PLETF, VE225PXETA, VE225PXETF, VE225PZETA, VE225PZETF, VE225STLETF, VE225TLETA, VE225TLETF, VE225TXETA, VE225TXETF, VE225TZETA, VE225TZETF 1993
E225CXEOB, E225CZEOB, E225PXEOB, E225PZEOB, E225STLEOB, E225TXEOB, E225TZEOB 1995
E250CXECD, E250CZECD, E250PXECD, E250PZECD 1998
SE200WTPLA, SE200WTPXA 1996
SE200WTPLG, SE200WTPXG 1998
SE200WTPLS, SE200WTPXS 1997
Information:
Start By:a. remove valve covers Earlier fuel injection nozzles are installed in adapters that are below the surface of the cylinder head.
Do not let the tops of the fuel nozzles turn when the fuel lines are loosened. The nozzles will be damaged if the top of the nozzles turn in the body.
1. Use Tooling (A) to loosen fuel injection line nut (1) at the fuel injection nozzles. 2. Disconnect fuel injection line nut (2) from head adapter nut (3).3. Remove adapter nut (3) and the O-ring seal.4. Move adapter (4) out of the valve cover base, and remove fuel injection line (1). 5. If necessary, remove seal (5) from fuel injection line (1). 6. Remove bolt (7) that holds clamp (6). Clamp (6) cannot be removed until fuel injection nozzle (8) is lifted 25.0 mm (1.00 in).7. Remove fuel injection nozzle (8) with Tooling (B) as follows: a. Install 6V-6983 Adapter and 6V-4152 Screw (9) [part of Tooling (B)] into fuel injection nozzle (8). b. Install 6V-6982 Tube Assembly (11) over the 6V-4152 Screw. Use 2S-5658 Washer and 1B-2406 Nut (10) on the 6V-4152 Screw to pull fuel injection nozzle (8) from the adapter. Items (10) and (11) are part of Tooling (B).
A replacement of compression seal washer (13) and of carbon dam seal (12) must be made each time the fuel injection nozzle is removed. Be sure that the replacement compression seal washer (13) is the same color code and part number as the original compression seal washer. If the wrong thickness washer is used, engine damage could occur. See Specifications for 3408 Vehicular Engines for more information.
8. Remove carbon dam seal (12) and compression seal washer (13) from fuel injection nozzle (8).Install Fuel Injection Nozzles
Earlier fuel injection nozzles are installed in adapters that are below the surface of the cylinder head. 1. Use Tool (D) to clean adapter bore (1) for the fuel injection nozzle. Use a tap driver to turn Tool (D). 2. Install compression seal washer (3) on fuel injection nozzle (4).3. Use Tool (A) to install carbon dam seal (2) on fuel injection nozzle (4). Refer to Special Instruction SEHS7292 for the use of Tooling (C). 4. Install fuel injection nozzle (4) and clamp (5) as a unit. Install the bolt through the clamp into the adapter. 5. Install O-ring seal (6) on fuel injection line (7) and put clean diesel fuel on it. 6. Install fuel injection line (7). Move adapter (8) into position in the rocker arm cover base.
Do not let the tops of the fuel nozzles turn when the fuel lines are tightened. The nozzles will be damaged if the top of the nozzles turn in the body.
7. Use Tooling (B) to tighten the inner fuel line nuts to a torque of 41 7 N m (30 5 lb ft). 8. Put clean diesel fuel oil on O-ring seal (11). Install O-ring seal (11) and nut (10). Tighten nut (10) to a torque of 30 5 N m (22 4 lb ft).9. Install nut (9) for the fuel injection line, and tighten the fuel injection line nut to a torque of 41 7 N m (30 5 lb ft).End By:a. install valve coversb. bleed (remove) the air from the fuel system (see Testing and Adjusting)
Do not let the tops of the fuel nozzles turn when the fuel lines are loosened. The nozzles will be damaged if the top of the nozzles turn in the body.
1. Use Tooling (A) to loosen fuel injection line nut (1) at the fuel injection nozzles. 2. Disconnect fuel injection line nut (2) from head adapter nut (3).3. Remove adapter nut (3) and the O-ring seal.4. Move adapter (4) out of the valve cover base, and remove fuel injection line (1). 5. If necessary, remove seal (5) from fuel injection line (1). 6. Remove bolt (7) that holds clamp (6). Clamp (6) cannot be removed until fuel injection nozzle (8) is lifted 25.0 mm (1.00 in).7. Remove fuel injection nozzle (8) with Tooling (B) as follows: a. Install 6V-6983 Adapter and 6V-4152 Screw (9) [part of Tooling (B)] into fuel injection nozzle (8). b. Install 6V-6982 Tube Assembly (11) over the 6V-4152 Screw. Use 2S-5658 Washer and 1B-2406 Nut (10) on the 6V-4152 Screw to pull fuel injection nozzle (8) from the adapter. Items (10) and (11) are part of Tooling (B).
A replacement of compression seal washer (13) and of carbon dam seal (12) must be made each time the fuel injection nozzle is removed. Be sure that the replacement compression seal washer (13) is the same color code and part number as the original compression seal washer. If the wrong thickness washer is used, engine damage could occur. See Specifications for 3408 Vehicular Engines for more information.
8. Remove carbon dam seal (12) and compression seal washer (13) from fuel injection nozzle (8).Install Fuel Injection Nozzles
Earlier fuel injection nozzles are installed in adapters that are below the surface of the cylinder head. 1. Use Tool (D) to clean adapter bore (1) for the fuel injection nozzle. Use a tap driver to turn Tool (D). 2. Install compression seal washer (3) on fuel injection nozzle (4).3. Use Tool (A) to install carbon dam seal (2) on fuel injection nozzle (4). Refer to Special Instruction SEHS7292 for the use of Tooling (C). 4. Install fuel injection nozzle (4) and clamp (5) as a unit. Install the bolt through the clamp into the adapter. 5. Install O-ring seal (6) on fuel injection line (7) and put clean diesel fuel on it. 6. Install fuel injection line (7). Move adapter (8) into position in the rocker arm cover base.
Do not let the tops of the fuel nozzles turn when the fuel lines are tightened. The nozzles will be damaged if the top of the nozzles turn in the body.
7. Use Tooling (B) to tighten the inner fuel line nuts to a torque of 41 7 N m (30 5 lb ft). 8. Put clean diesel fuel oil on O-ring seal (11). Install O-ring seal (11) and nut (10). Tighten nut (10) to a torque of 30 5 N m (22 4 lb ft).9. Install nut (9) for the fuel injection line, and tighten the fuel injection line nut to a torque of 41 7 N m (30 5 lb ft).End By:a. install valve coversb. bleed (remove) the air from the fuel system (see Testing and Adjusting)
Parts fuel EVINRUDE:
0393334
0393334 FUEL CONNECTOR
BE115TLEDA, BE130TLECE, BE130TLEDM, BE130TLEUB, BE200CXECM, BE200CXEDR, BE200CXEUA, BE225CXECS, BE225CXEDE, BE225CXEUD, BE50DTLEDC, BE60ELEDR, BE70ELEDA, E100STLCCA, E100STLCEM, E100STLEIE, E100STLEND, E100STLERC, E100STLESB, E100STLETS, E100WMLCRS,
0398339
0398339 FUEL CONNECTOR & HOSE
BE130TLECE, BE130TLEDM, BE130TLEUB, BE200CXECM, BE200CXEDR, BE200CXEUA, BE225CXECS, BE225CXEDE, BE225CXEUD, E120TLCCA, E120TLCEM, E120TLCUR, E120TLEIE, E120TLEND, E120TLERC, E120TLESB, E120TLETF, E125ESXENR, E125ESXERK, E125ESXESS, E125ESXETA, E125ES
0398384
0398384 FUEL FILTER ASSY.
E120TLCUR, E140TLCUA, E200STLCUA, E200WPXEEN, E200WPXSIF, E200WPXSSC, E225CLCUB, SE200WTPLA, SE200WTPLG, SE200WTPLS
0398319
0398319 FUEL FILTER ASSY.
BE130TLECE, BE130TLEDM, BE130TLEUB, BE200CXECM, BE200CXEDR, BE200CXEUA, BE225CXECS, BE225CXEDE, BE225CXEUD, BE5FRBECC, E120TLCCA, E120TLCEM, E120TLERC, E120TLESB, E120TLETF, E125ESXERK, E125ESXESS, E125ESXETA, E125ESXW, E130CXAOR, E140CXARC, E140CXAT
0435953
0435953 FUEL PUMP ASSY.
BE200CXEDR, BE225CXEDE, BE250CXEDA, BE250CXEUM, E185ESERK, E185ESXETA, E200CXARC, E200CXATF, E200CXEOC, E225CXARC, E225CXATF, E225CXEOB, E250CXARC, E250CXATF, E250CXEOR, E300CXEOR, E300CXERC, E300CXETF
0435954
0438400
0438400 FUEL PUMP ASSY.
BE115ELEUA, BE115GLECM, BE130TLECE, BE150ELECD, BE150ELEUC, BE175EXECD, BE175EXEUC, BE200CXECM, BE200CXEUA, BE225CXECS, BE225CXEUD, BE250CXECB, BE60TLECM, BE70ELECB, BE90ELEUA, BE90SLECM, E100WPLEEC, E100WPLSIF, E100WPLSSR, E100WQLECS, E250CXECD, E50
0438402
0438402 FUEL PUMP ASSY.
E150WPLSIF, E150WPLSSC, E200WPXEEN, E200WPXSIF, E200WPXSSC, SE150WTPLT, SE150WTPLY, SE200WTPLG, SE200WTPLS