0343352 EVINRUDE LENS, Johnson

Illustration 1 g00760594
(1) Apply 9S-3263 Thread Lock Compound on the tapered end of the stud to the following dimension. ... 10.5 1.5 mm (0.41 0.06 inch)Tighten the stud to the following torque. ... 68 7 N m (50 5 lb ft) (2) Apply engine oil to the oil filter seal. Put the oil filter in position. Turn the oil filter by hand until the seal makes contact with the base. Additionally tighten the oil filter by 3/4 of a turn.
Illustration 2 g00760654
View A-A (3) 4N-8150 Spring Length under test force ... 55.25 mm (2.175 inch) Test force ... 76 5.8 N (17 1.30 lb) Free length after test ... 93.7 mm (3.69 inch) Outside diameter ... 20.6 mm (0.81 inch) The filter and the cooler bypass valves will open with the following pressure difference. ... 255 20 kPa (37 3 psi) (4) Tighten the plug to the following torque. ... 100 15 N m (74 11 lb ft)Type 2
Illustration 3 g00760313
Right view (1) Oil Filter Adapter
Illustration 4 g00760757
View A-A (2) 4N-8150 Spring Length under test force ... 55.25 mm (2.175 inch) Test force ... 76 5.8 N (17 1.30 lb) Free length after test ... 93.7 mm (3.69 inch) Outside diameter ... 20.6 mm (0.81 inch) The filter and the cooler bypass valves will open with the following pressure difference. ... 255 20 kPa (37 3 psi) (3) Tighten the plug to the following torque. ... 100 15 N m (74 11 lb ft)
Illustration 5 g00760356
Top view (4) Oil Filter Base
Illustration 6 g00760397
Right view (5) Apply 9S-3263 Thread Lock Compound on the tapered end of the stud to the following dimension. ... 10.2 1.5 mm (0.40 0.06 inch)Tighten the stud to the following torque. ... 80 14 N m (59 10 lb ft) (6) Apply engine oil to the oil filter seal. Put the oil filter in position. Turn the oil filter by hand until the seal makes contact with the base. Additionally tighten the oil filter by 3/4 of a turn.Type 3
Illustration 7 g00760500
Right view (1) Oil Filter Adapter
Illustration 8 g00760757
View A-A (2) 4N-8150 Spring Length under test force ... 55.25 mm (2.175 inch) Test force ... 76 5.8 N (17 1.30 lb) Free length after test ... 93.7 mm (3.69 inch) Outside diameter ... 20.6 mm (0.81 inch) The filter and the cooler bypass valves will open with the following pressure difference. ... 255 20 kPa (37 3 psi) (3) Tighten the plug to the following torque. ... 100 15 N m (74 11 lb ft)
Illustration 9 g00760521
Top view (4) Oil Filter Base
Illustration 10 g00760507
Front view (5) Apply 9S-3263 Thread Lock Compound on the tapered end of the stud to the following dimension. ... 10.2 1.5 mm (0.40 0.06 inch)Tighten the stud to the following torque. ... 80 14 N m (59 10 lb ft) (6) Apply engine oil to the oil filter seal. Put the oil filter in position. Turn the oil filter by hand until the seal makes contact with the base. Additionally tighten the oil filter by 3/4 of a turn.