0326908 EVINRUDE SOUND BLANKET,Front

Illustration 1 g01233415
This illustration shows one type of enclosed generator set.
Illustration 2 g01233280
This illustration shows another type of enclosed generator set.
Illustration 3 g01233028
This illustration shows an open generator set.
Illustration 4 g01239864
Typical example of a fuel tankLifting point (1)
Illustration 5 g01034418
Lift the package from this point. Refer to the following topic:
Operation and Maintenance Manual, "Product Lifting"Rating for lifting equipment (2) This message is located on the side of the enclosure near the bottom of the enclosure.
Illustration 6 g01233472
The lifting equipment that is used for lifting this type of generator set must be rated for a total weight of 3000 kg (6,600 lb).Rating for lifting equipment (3) This message is located on the side of the enclosure near the bottom of the enclosure.
Illustration 7 g01233040
The lifting equipment that is used for lifting this type of generator set must be rated for a total weight of 4000 kg (8,800 lb).Rating for lifting equipment (4) This message is located on the side of open generator sets on the base.
Illustration 8 g01233043
The lifting equipment that is used for lifting this type of generator set must be rated for a total weight of 3000 kg (6,600 lb).Fuel tank vent (5) This message is located on the fuel tank by the vent.
Illustration 9 g01239683
This generator tank has been pressure tested at 20.6 kPa (3 psi) to 34.5 kPa (5 psi) for weld integrity. However, it has not been designed as a pressure vessel and must be vented from supplied openings. This tank was designed, manufactured and intended for diesel fuel only. This tank was intended for stationary use only. Maximum load capacity 1180 kg (2601 lb) Fuel tank capacity 557 L (147 US gal). When filling the via a pump, the overflow fitting of this atmospheric day tank must be plumbed in a continuous downward path toward the main fuel tank without downsizing to prevent a potential fuel spillage. To prevent fuel and compartment contamination, it is recommended to use a 100 mesh fuel strainer for incoming fuel.
Illustration 10 g01239658
This generator tank has been pressure tested at 20.6 kPa (3 psi) to 34.5 kPa (5 psi) for weld integrity. However, it has not been designed as a pressure vessel and must be vented from supplied openings. This tank was designed, manufactured and intended for diesel fuel only. This tank was intended for stationary use only. Maximum load capacity 2250 kg (4960 lb). Fuel tank capacity 757 L (200 US gal). When filling the via a pump, the overflow fitting of this atmospheric day tank must be plumbed in a continuous downward path toward the main fuel tank without downsizing to prevent a potential fuel spillage. To prevent fuel and compartment contamination, it is recommended to use a 100 mesh fuel strainer for incoming fuel.
Illustration 11 g01239678
This generator tank has been pressure tested at 20.6 kPa (3 psi) to 34.5 kPa (5 psi) for weld integrity. However, it has not been designed as a pressure vessel and must be vented from supplied openings. This tank was designed, manufactured and intended for diesel fuel only. This tank was intended for stationary use only. Maximum load capacity 2250 kg (4960 lb). Fuel tank capacity 1485 L (392 US gal). When filling the via a pump, the overflow fitting of this atmospheric day tank must be plumbed in a continuous downward path toward the main fuel t