197787 3 COUPLER Force
H0092S91A, H0093S91A
COUPLER
Price: query
Rating:
You can buy parts:
As an associate, we earn commssions on qualifying purchases through the links below
$15.85
04-11-2023
-: -
Boat Motor Socket Fuel Line Hose Connector 65750-98505 for Sierra Chrylser Suzuki Outboard 18-8062 197787-3 5/16" ID 11MM Engine
100% Aftermarket Made in Taiwan Quality || Please check the 2nd photo image to confirm the correct fuel connector for your engine male connector. If not you may want to contact us for the correct connecting male connector || Replace Sierra part number: #18-8062, Chrylser part number: #197787-3 || Female connector that fits both the motor and tank ends of your 5/16" 8MM fuel line , Plated Brass: ID: 11MM || Boat Motor for Outboard Engine
100% Aftermarket Made in Taiwan Quality || Please check the 2nd photo image to confirm the correct fuel connector for your engine male connector. If not you may want to contact us for the correct connecting male connector || Replace Sierra part number: #18-8062, Chrylser part number: #197787-3 || Female connector that fits both the motor and tank ends of your 5/16" 8MM fuel line , Plated Brass: ID: 11MM || Boat Motor for Outboard Engine
Boating Accessories New Marine Fuel Connector Replaces Tempo 220110 Sierra 18-8062
Boating Accessories Marine Female 3/8" Fuel Connector Replaces Tempo 220110 Sierra 18-8062 Chrysler/Force 197787-3 Suzuki: 65750-98505
Boating Accessories Marine Female 3/8" Fuel Connector Replaces Tempo 220110 Sierra 18-8062 Chrysler/Force 197787-3 Suzuki: 65750-98505
$29.10
30-09-2017
ITACO: ITACO
2x Fuel Hose Connector 1/4" fit Suzuki Outboard Boat Engine IN OUT 197787-3 6MM
Aftermarket Brand: ITACO||Fits SUZUKI OUTBOARD part number: 65750-98505, 65750-95500, 65750-95510 (IMPT: check OEM part number before purchase!!)||Fits SIERRA part number: #18-8079, Replace Chrylser part number: #197787-3||2pcs Socket Fuel Hose Connector INLET (Female)||Estimated Time of Delivery from Singapore: 8-18 working days
Aftermarket Brand: ITACO||Fits SUZUKI OUTBOARD part number: 65750-98505, 65750-95500, 65750-95510 (IMPT: check OEM part number before purchase!!)||Fits SIERRA part number: #18-8079, Replace Chrylser part number: #197787-3||2pcs Socket Fuel Hose Connector INLET (Female)||Estimated Time of Delivery from Singapore: 8-18 working days
Number on catalog scheme: 5
Force entire parts catalog list:
Information:
1. Use Tool (A) to remove the front engine oil filter (if equipped). 2. Remove bolts (1) and the washers that hold the tube to the oil pump elbow. Remove bolts (2) and the washers that hold oil pump elbow (3) to the cylinder block. 3. Remove two bolts (4) and the washers that hold the engine oil pump to the front housing. Remove the engine oil pump and the oil pump elbow as a unit. The following steps are for the installation of the engine oil pump.4. Check the condition of the O-ring seal used at the tube-to-oil pump elbow connection and the O-ring seal used on the engine oil pump. If the seals are worn or damaged, use new parts for replacement.5. Install the O-ring seal in the oil pump elbow. Install the O-ring seal on the engine oil pump. Lubricate the bore in the front housing with clean engine oil. Put the engine oil pump in position in the front housing.6. Install two bolts (4) and the washers that hold the engine oil pump to the front housing.7. Install two bolts (2) and the washers that hold the oil pump elbow to the cylinder block.8. Install two bolts (1) and the washers that hold the tube to oil pump elbow (3).9. Install the engine oil filter. Follow the instructions on the oil filter assembly for correct installation.Disassemble & Assemble Engine Oil Pump
Start By:a. remove engine oil pump 1. Remove oil pump elbow (1) from the engine oil pump. Remove the two O-ring seals from oil pump elbow (1). Remove four bolts (2) and the washers. Remove cover (3) from the pump housing. 2. Remove O-ring seal (4) and idler gear (5) from the cover.3. Use Tool (A) and remove gear (6) from the drive shaft.
Before removing drive shaft (7) from the pump housing, be sure no burrs exist on the drive shaft. If the drive shaft has burrs, it may scratch the bores in the pump housing.
4. Remove drive shaft (7) from the pump housing. The following steps are for the assembly of the engine oil pump.5. Be sure all parts of the engine oil pump are thoroughly clean prior to assembly. Check the condition of the O-ring seals used in the engine oil pump and on the oil pump elbow. If the seals are worn or damaged, use new parts for replacement. Lubricate all internal parts of the engine oil pump with clean engine oil. 6. Install drive shaft (7) in the pump housing. Heat gear (6) to a maximum temperature of 316°C (601°F). Install gear (6) on the end of drive shaft (7). Position the gear so the distance between the outside face of the gear and the step face on the pump body is 29.40 0.50 mm (1.157 .020 in).7. Install idler gear (5) in the pump housing.8. Install O-ring seal (4) in cover (3). Install cover (3) and four bolts (2) and the washers that hold it. 9. Install the two O-ring seals on oil pump elbow (1). Install the oil pump elbow on the engine oil pump.
The pump must rotate freely by hand after assembly.
End By:a. install engine oil pump
Start By:a. remove engine oil pump 1. Remove oil pump elbow (1) from the engine oil pump. Remove the two O-ring seals from oil pump elbow (1). Remove four bolts (2) and the washers. Remove cover (3) from the pump housing. 2. Remove O-ring seal (4) and idler gear (5) from the cover.3. Use Tool (A) and remove gear (6) from the drive shaft.
Before removing drive shaft (7) from the pump housing, be sure no burrs exist on the drive shaft. If the drive shaft has burrs, it may scratch the bores in the pump housing.
4. Remove drive shaft (7) from the pump housing. The following steps are for the assembly of the engine oil pump.5. Be sure all parts of the engine oil pump are thoroughly clean prior to assembly. Check the condition of the O-ring seals used in the engine oil pump and on the oil pump elbow. If the seals are worn or damaged, use new parts for replacement. Lubricate all internal parts of the engine oil pump with clean engine oil. 6. Install drive shaft (7) in the pump housing. Heat gear (6) to a maximum temperature of 316°C (601°F). Install gear (6) on the end of drive shaft (7). Position the gear so the distance between the outside face of the gear and the step face on the pump body is 29.40 0.50 mm (1.157 .020 in).7. Install idler gear (5) in the pump housing.8. Install O-ring seal (4) in cover (3). Install cover (3) and four bolts (2) and the washers that hold it. 9. Install the two O-ring seals on oil pump elbow (1). Install the oil pump elbow on the engine oil pump.
The pump must rotate freely by hand after assembly.
End By:a. install engine oil pump