F521296T1 Force RETAINER-Propshaft Cage (Painted)

Table 1
122-0725 Oil Filter Base    
    Serial Number Prefix     Serial Number
Beginning     Serial Number
Ending    
Industrial     2AW     1     715    
1DW 1     500    
5DZ 1     188    
CRJ 1     Up    
Machine     3PD     1     81    
7ZR 1     3741    
5ED 1     154    
6AR 1     1882    
Marine     6BW     1     Up    
2XR 1     Up    
Truck     2PN     1     7341    
8YS 1     7368    
3CS 1     5801    
1YN 1     12844    
9NS 1     19833    
2KS 1     17296    
9SM 1     Up    
Illustration 1 g00842293
Oil filter base (1) Oil cooler bypass valve Opening pressure ... 155 17 kPa (22.5 2.5 psi) Bypass opening pressure differential ... 170 kPa (25 psi) (2) Oil filter base (3) Oil filter (4) Bolts (six total)Apply 9S-3263 Thread Lock to each of the six bolts.
Illustration 2 g00473681
Section A-A (5) Seal (6) 8M-3182 Spring Assembled length ... 63.5 mm (2.50 inch) Load at assembled length ... 39.7 N (8.92 lb) Free length after test ... 91.7 mm (3.61 inch) Outside diameter ... 20.6 mm (0.81 inch) (7) Seal (8) Plunger (9) Seal (10) Stud Tighten the stud that holds the oil filter to the oil filter base to the following torque. ... 68 7 N m (50 5 lb ft)
Illustration 3 g00473768
Section B-B (11) 2N-6005 Spring Assembled length ... 96.5 mm (3.80 inch) Load at assembled length ... 92.5 N (20.80 lb) Minimum operating length ... 45.7 mm (1.80 inch) Load at minimum operating length ... 257.6 N (57.91 lb) Free length after test ... 124.7 mm (4.91 inch) Outside diameter ... 21.8 mm (0.86 inch) (12) Valve (13) Seal (14) Seal
Illustration 4 g00473770
Section C-CRelief pressure ... 696 kPa (101 psi) (15) Spacer (16) 1A-2170 Spring Assembled length ... 21.4 mm (0.84 inch) Load at assembled length ... 198.0 13.4 N (45 3.5 lb) Free length after test ... 31.0 mm (1.22 inch) Outside diameter ... 19.6 mm (0.77 inch) (17) Seal (18) Tighten the cover that replaces the centrifugal filter to the following torque 60 10 N m (44 7 lb ft).
Illustration 5 g00841271
Oil cooler bypass valve (A) Minimum stroke ... 8.4 mm (0.33 inch) (B) Position B (Closed) Start to close temperature ... 100 to 103 °C (212 to 217 °F) Position B will activate at a specific temperature. Temperature ... 111 °C (232 °F) Bypass opening pressure differential ... 155 17 kPa (22.5 2.5 psi) Higher than normal activation temperature ... 127 °C (261 °F) (C) Length of fully compressed valve ... 44.2 1 mm (1.74 0.04 inch) (D) Length of fully extended valve ... 52.6 1 mm (2.07 0.04 inch)Note: At higher than normal activation temperature, the oil cooler bypass valve will stroke to position B. At higher than normal activation temperature, the oil cooler bypass valve will remain at position B.