17626-ZV0-020 Honda SEE PART DETAILS - PRI; VALVE, BREATHER

Table 1
Required Tools
Tool Part Number Part Description Qty
A 456-4371 Lever Hoists 2
439-3940 Bracket As 4
B 477-8634 Load Leveler Gp 1
C - Loctite Nickel Anti-Seize -
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hot coolant, steam, and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and allow sufficient time for the cooling system to cool.Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.Cooling System Coolant Additive contains alkali. Avoid contact with skin and eyes.
Personal injury can result from contact with refrigerant.Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.
Start By:
Remove the engine enclosure.
Remove the fan drive.
Recover the refrigerant. Refer to Service Manual, SENR5664, "All Products Air Conditioning and Heating R134a for All Caterpillar Machines" for the recovery and the charging procedure. Refer to Special Publication, NENG2500, "Air Conditioning Tools" for the correct tools.
Drain the coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
Illustration 1 g06302104
Loosen clamp (2) and remove tube assembly (1).
Illustration 2 g06302107
Cut cable straps (4) and position the harness assembly out of the way.
Disconnect hose (6).
Remove nut (8) and disconnect cable assembly (3).
Remove bolt (5) and bolt (7) and position cable assembly (3) out of the way.
Illustration 3 g06302114
Cut the cable straps and disconnect harness assembly (9).
Remove the nuts and disconnect hose assemblies (10).
Remove bolts (11) and position the cable assembly out of the way.
Illustration 4 g06302122
Remove bolt (12) and position the cable assembly out of the way.
Remove bolt (13) and position the harness assembly out of the way.
Illustration 5 g06302140
Illustration 6 g06302136
Remove nut (15) and position the cable assembly out of the way.
Remove nut (17) and position the ground strap and the cable assembly out of the way.
Cut cable strap (14) and disconnect harness assembly (16).