31916-ZX2-003 Honda SPARK PLUG (ZFR6K-11E) (NGK)

Illustration 1 g06181110
Table 1
Specification for 134-6054 Flow Switch Gp
Item Qty Part Specification Description
1 1 3E-3364 Receptacle -
2 - - Note: Wire 2X 18 GA to be SAE J1128, Type SXL or equivalent.
3 1 9X-1813 Sleeve -
4 1 9G-6553 Welch Expansion Plug Note: Adjust spring , prior to insertion of seal and plug , with switch in vertical position so the contacts close when 0.36 0.03 N (0.081 0.007 lb) is applied to point " X " and after closure, travels a minimum of 1.27 farther ( measured from " X " to the closed stop. Contacts must open on return travel at or before a minimum of 0.303 N (0.0681 lb) is applied to the point ( X ) and after opening travels a minimum of 1.27 farther than the open stop.
9G-6549 O-Ring Seal
5 1 9X-4730 Flow Switch The switch contact position is normally open.
Voltage ranges from 5 VDC to 28 VDC.
Temperature operating range 40° 80°C (104° 176°F).
6 1 3E-3365 Receptacle Lock Wedge -
7 2 8T-8729 Connector Pin -
8 1 9X-5266 Paddle Note: This switch to be installed with the paddle in the vertical down position only.
9 4 7T-0667 Rivet -