9807B-5615P Honda SPARK PLUG (KJ20DR-M11) (DENSO)

Illustration 1 g02475658
Typical example
Always inspect lifting eyebolts and all other lifting equipment for damage before performing any lifting. Never bend the eyebolts and the brackets. Never perform product lifting if components are damaged. Only load the eyebolts and the brackets under tension. Remember that the capacity of an eyebolt is less as the angle between the supporting members and the object becomes less than 90 degrees.When it is necessary to remove a component at an angle, only use a link bracket that is properly rated for the weight.
Use a hoist to remove heavy components. Use an adjustable lifting beam to lift the engine. All supporting members (chains and cables) should be parallel to each other. The chains and cables should be perpendicular to the top of the object that is being lifted.Some removals require lifting the fixtures to obtain correct balance and safety.To remove the engine, use the lifting eyes that are on the engine. Radiators that are approved by Caterpillar can be lifted with the engine.Lifting eyes are designed and installed for specific engine arrangements. Alterations to the lifting eyes and/or the engine make the lifting eyes and the lifting fixtures obsolete. If alterations are made, ensure that correct lifting devices are provided. Consult your Cat dealer for information regarding fixtures for correct engine lifting.Note: The engine is equipped with three lifting eyes. All the lifting eyes must be used to lift the engine.