90557-ZV5-000 Honda WASHER (28MM) (Honda Code 3706462).

Active Event Codes
An active event code represents a problem with engine operation. Correct the problem as soon as possible.Active event codes are listed in ascending numerical order. The code with the lowest number is listed first.Illustration 1 is an example of the operating range of a sensor.
Illustration 1 g01365757
Example of the typical operating range of a sensor (1) This area represents the normal operating range of the engine parameter. (2) In these areas, the engine is operating in an unsafe operating range of the monitored parameter. An event code will be generated for the monitored parameter. The sensor circuit does not have an electronic problem. (3) In these areas, the signal from the sensor is outside of the operating range of the sensor. The sensor circuit has an electronic problem. A diagnostic code will be generated for the sensor circuit. Refer to Troubleshooting, "Diagnostic Trouble Codes" for additional information on diagnostic codes.Logged Event Codes
When the ECM generates an event code, the ECM may log the event code in permanent memory. The ECM has an internal diagnostic clock. The ECM will record the following information when an event code is generated:
The hour of the first occurrence of the code
The hour of the last occurrence of the code
The number of occurrences of the codeLogged events are listed in chronological order. The most recent event code is listed first.This information can be helpful for troubleshooting intermittent problems. Logged codes can also be used to review the performance of the engine.Clearing Event Codes
A code is cleared from memory when one of the following conditions occur:
The code does not recur for 100 hours.
A new code is logged and there are already ten codes in memory. In this case, the oldest code is cleared.
The service technician manually clears the code.Always clear logged event codes after investigating and correcting the problem which generated the code.Troubleshooting
To troubleshoot the engine, perform the following steps in order to diagnose a malfunction:
Obtain the following information about the complaint:
The event and the time of the event
Determine the conditions for the event. The conditions will include the engine rpm and the load.
Determine if there are any systems that were installed by the dealer or by the customer that could cause the event.
Determine whether any additional events occurred.
Verify that the complaint is not due to normal engine operation. Verify that the complaint is not due to error of the operator.
Narrow the probable cause. Consider the operator information, the conditions of operation, and the history of the engine.
Perform a visual inspection. Inspect the following items:
Fuel supply
Oil level
Oil supply
Wiring
ConnectorsBe sure to check the connectors. This check is important for problems that are intermittent. Refer to Troubleshooting, "Electrical Connectors - Inspect".If these steps do not resolve the problem, refer to Table 1 for the procedure to troubleshoot the event code.Cross-Reference Information for Event Codes
Event codes are generated when abnormal operating conditions exist. Table 1 is a list of the event codes for the engine. The event codes are cross-referenced with the appropriate procedure that can be used to troubleshoot the code.
Table 1
Cross-Reference from Event Codes on Cat Data Link to J1939 Code to Troubleshooting Procedure    
Event Code and Description    J1939 Code and Description    Troubleshooting Procedure    
E073(1)
High Oil Filter Differential Pressure - lease severe     99-15
Engine Oil Filter Differential Pressure : High - least severe (1)     Troubleshooting, "Oil Filter Differential Pressure Problem"    
E073(2)
High Oil Filter Differential Pressure - moderate severity     99-16
Engine Oil Filter Differential Pressure : High - moderate severity (2)    
E073(3)
High Oil Filter Differential Pressure - most severe     99-0
Engine Oil Filter Differential Pressure : High - most severe (3)    
E171(2)
Low Engine Oil Level - moderate severity     98-18
Engine Oil Level : Low - moderate severity (2)     Troubleshooting, "Oil Level Is Low"    
E171(3)
Low Engine Oil Level - most severe     98-1
Engine Oil Level : Low - most severe (3)    
E198(1)
Low Fuel Pressure - least severe     5580-17
Engine Filtered Fuel Absolute Pressure : Low - least severe (1)     Troubleshooting, "Fuel Pressure Is Low"    
E198(2)
Low Fuel Pressure - moderate severity     5580-18
Engine Filtered Fuel Absolute Pressure : Low - moderate severity (2)    
E199(1)
Low Coolant Temperature - least severe     110-17
Engine Coolant Temperature : Low - least severe (1)     Troubleshooting, "Coolant Temperature Is Low"    
E199(2)
Low Coolant Temperature - moderate severity     110-18
Engine Coolant Temperature : Low - moderate severity (2)    
E199(3)
Low Coolant Temperature - most severe     110-1
Engine Coolant Temperature : Low - most severe (3)    
E265(1)
User Defined Shutdown - least severe         Troubleshooting, "Engine Shutdown Occurrence"    
E278(1)
High Exhaust Differential Temperature - least severe     1318-15
Engine Exhaust Temperature Bank Imbalance : High - least severe (1)     Troubleshooting, "Exhaust Temperature Is High"    
E278(2)
High Exhaust Differential Temperature - moderate severity     1318-16
Engine Exhaust Temperature Bank Imbalance : High - moderate severity (2)    
E278(3)
High Exhaust Differential Temperature - most severe     1318-0
Engine Exhaust Temperature Bank Imbalance : High - most severe (3)    
E321(1)
High Right Exhaust Temperature - least severe     2433-15
Engine Exhaust Exhaust Gas Temperature - Right Manifold : High - least severe (1)     Troubleshooting, "Exhaust Temperature Is High"    
E321(2)
High Right Exhaust Temperature - moderate severity     2433-16
Engine Exhaust Exhaust Gas Temperature - Right Manifold : High - moderate severity (2)    
E321(3)
High Right Exhaust Temperature - most severe     2433-0
Engine Exhaust Exhaust Gas Temperature - Right Manifold : High - most severe (3)    
E322(1)
High Left Exhaust Temperature - least severe     2434-15
Engine Exhaust Exhaust Gas Temperature - Left Manifold : High - least severe (1)     Troubleshooting, "Exhaust Temperature Is High"    
E322(2)
High Left Exhaust Temperature - moderate severity     2434-16
Engine Exhaust Exhaust Gas Temperature - Left Manifold : High - moderate severity (2)    
E322(3)
High Left Exhaust Temperature - most severe     2434-0
Engine Exhaust Exhaust Gas Temperature - Left Manifold : High - most severe (3)    
E360(1)
Low Engine Oil Pressure - least severe     100-17
Engine Oil Pressure : Low - least severe (1)     Troubleshooting, "Oil Pressure Is Low"