5034372 JOHNSON BRACKET, LOWER MOUNT


5034372 BRACKET, LOWER MOUNT JOHNSON BJ40PL4SRS, BJ50PL4SRS BRACKET
5034372 BRACKET, LOWER MOUNT JOHNSON
Rating:
83

Buy BRACKET, LOWER MOUNT 5034372 JOHNSON genuine, new aftermarket parts with delivery
Number on catalog scheme: 12
 

Compatible models:

BRP JOHNSON entire parts catalog list:

BJ40PL4SRS, J40PL4SRM 2004
BJ50PL4SRS, J50PL4SRM 2004

Information:

API Oils
The Engine Oil Licensing and Certification System by the American Petroleum Institute (API) is recognized by Caterpillar. For detailed information about this system, see the latest edition of the "API publication No. 1509". Engine oils that bear the API symbol are authorized by API.
Illustration 1 g00546535
Typical API symbol
Diesel engine oils CC, CD, CD-2, and CE have not been API authorized classifications since 1 January 1996. Table 1 summarizes the status of the classifications.
Table 1
API Classifications
Current Obsolete
CI-4(1), CH-4(1), CG-4(2), CF-4(3) CE
CF (4) CC, CD
CF-2(5) CD-2(5)
(1) API CH-4 and CI-4 oils are acceptable if the requirements of Caterpillar's ECF-1 (Engine Crankcase Fluid specification-1) are met. CH-4 and CI-4 oils that have not met the requirements of Caterpillar's ECF-1 Specification may cause reduced engine life.
(2) API CG-4 oils are acceptable for all Caterpillar diesel engines. When the API CG-4 oils are used, the oil drain interval should not exceed 75 Percent of the standard oil drain interval for your engine.
(3) API CF-4 oils are no longer recommended for Caterpillar on-highway diesel engines.
(4) API CF oils are not recommended for Caterpillar on-highway diesel engines.
(5) API CF-2 and CD-2 oils are classifications for two-cycle diesel engines. Caterpillar does not sell engines that utilize the CD-2 and the API CF-2 oils.Caterpillar Diesel Engine Oil (DEO)
Caterpillar Oils have been developed and tested in order to provide the full performance and service life that has been designed and built into Caterpillar Engines. Caterpillar Oils are currently used to fill diesel engines at the factory. These oils are offered by Caterpillar dealers for continued use when the engine oil is changed. Consult your Caterpillar dealer for more information on these oils.Due to significant variations in the quality and in the performance of commercially available oils, Caterpillar makes the following recommendations:
Caterpillar Diesel Engine Oil (DEO) (10W-30)
Caterpillar Diesel Engine Oil (DEO) (15W-40)Commercial Oils
Engine Crankcase Fluid Recommendations for all Current and Noncurrent Caterpillar On-highway Truck Diesel Engines:
API CH-4 oils and API CI-4 oils are acceptable if the requirements of Caterpillar's ECF-1 (Engine Crankcase Fluid specification-1) are met. CH-4 oils and CI-4 oils that have not met the requirements of Caterpillar's ECF-1 Specification may cause reduced engine life.
API CG-4 oils are acceptable for all Caterpillar diesel engines. When the API CG-4 oils are used, the oil drain interval should not exceed 75 Percent of the standard oil drain interval for your engine.
API CF-4 oils are no longer recommended.
In selecting oil for any engine application, both the oil viscosity and oil performance classification/specification as specified by the engine manufacturer must be defined and satisfied. Using only one of these parameters will not sufficently define oil for an engine application.
In order to make the proper choice of a commercial oil, refer to the following explanations:API CI-4 - API CI-4 oils were developed in order to meet the requirements of high performance diesel engines that use cooled Exhaust Gas Recirculation (EGR). API CI-4 oils are acceptable if the requirements of Caterpillar's ECF-1 (Engine Crankcase Fluid specification-1) are met.API CH-4 - API CH-4 oils were developed in order to protect low emissions diesel engines that use a 0.05 percent level of fuel sulfur. However, API CH-4 oils may be used with higher sulfur fuels. API CH-4 oils are acceptable if the requirements of Caterpillar's ECF-1 (Engine Crankcase Fluid specification-1) are met.Note: CH-4 oils and CI-4 oils that have not met the requirements of Caterpillar's ECF-1 Specification may cause reduced engine life.
Failure to follow these oil recommendations can cause shortened engine service life due to deposits and/or excessive wear.
Note: Refer to Special Publication, SEBU6385, "Caterpillar On-highway Diesel Truck Engine Fluids Recommendations" for additional information that relates to lubrication for your engine.Lubricant Viscosity Recommendations
The proper SAE viscosity grade of oil is determined by the minimum ambient temperature during cold engine start-up, and the maximum ambient temperature during engine operation. Refer to Table 2 (minimum temperature) in order to determine the required oil viscosity for starting a cold engine.Refer to Table 2 (maximum temperature) in order to select the oil viscosity for engine operation at the highest ambient temperature that is anticipated.Note: Generally, use the highest oil viscosity that is available to meet the requirement for the temperature at start-up.If ambient temperature conditions at engine start-up require the use of multigrade SAE 0W oil, SAE 0W-40 viscosity grade is preferred over SAE 0W-20 or SAE 0W-30.Note: SAE 10W-30 is the preferred viscosity grade for the following diesel engines when the ambient temperature is above −18 °C (0 °F) and below 40 °C (104 °F).
C7
C-9
C9
3116
3126
Table 2
Engine Oil Viscosities for Ambient Temperatures(1)
Ambient Temperature
Viscosity Grade Minimum Maximum
SAE 0W-20 −40 °C (−40 °F) 10 °C (50 °F)
SAE 0W-30 −40 °C (−40 °F) 30 °C (86 °F)
SAE 0W-40 −40 °C (−40 °F)


Parts bracket JOHNSON:

5032787
 
5032787 BRACKET, NEUTRAL SW
BJ40PL4SDR, BJ40PL4SOC, BJ40PL4SRS, BJ50PL4SDR, BJ50PL4SOC, BJ50PL4SRS, J40PL4SNF, J40PL4STC, J50PL4SNF, J50PL4STC
5031401
 
5031401 BRACKET, FUEL FILTER
BJ40PL4SDR, BJ40PL4SOC, BJ40PL4SRS, BJ50PL4SDR, BJ50PL4SOC, BJ50PL4SRS, J40PL4SNF, J40PL4STC, J50PL4SNF, J50PL4STC
5032436
 
5032436 BRACKET, PRESSURE SENSOR
BJ40PL4SDR, BJ40PL4SOC, BJ40PL4SRS, BJ50PL4SDR, BJ50PL4SOC, BJ50PL4SRS, J40PL4SNF, J40PL4STC, J50PL4SNF, J50PL4STC
5032794
 
5032794 *BRACKET, TILLER HANDLE (WHITE
BJ40PL4SDR, BJ40PL4SOC, BJ40PL4SRS, BJ50PL4SDR, BJ50PL4SOC, BJ50PL4SRS, BJ60PL4SDM, BJ60PL4SOA, BJ60PL4SRR, BJ60PL4STC, BJ70PL4SDM, BJ70PL4SOA, BJ70PL4SRR, BJ70PL4STC, J40PL4STC, J50PL4STC
5031764
 
5031764 *BRACKET, FRONT PANEL
BJ40PL4SDR, BJ40PL4SOC, BJ40PL4SRS, BJ50PL4SDR, BJ50PL4SOC, BJ50PL4SRS, J40PL4STC, J50PL4STC
5034363
 
5034363 BRACKET, CLAMP STBD (WHITE)
BJ40PL4SRS, BJ50PL4SRS, J25PL4SRS, J30PL4SRS
5034364
 
5034364 BRACKET, CLAMP PORT (WHITE)
BJ40PL4SRS, BJ50PL4SRS, J25PL4SRS, J30PL4SRS
5034441
 
5034441 BRACKET, CONNECTOR
BJ40PL4SRS, BJ50PL4SRS
Back to top