0340200 JOHNSON FITTING, 90

Illustration 1 g00564152
Install two couplings (67) and (94) to exhaust elbow (95). Repeat this procedure for the couplings on the other side.
Illustration 2 g00564150
Illustration 3 g00564149
These views are of the left side at the front of the engine.
Install turbocharger gasket (93) to the exhaust manifold. Install gasket (89) to drain elbow (91).
Position a suitable lifting device (not shown) on turbine housing (69), cartridge (44), and compressor cover (40). Secure the lifting device to a hoist. Position turbine housing (69), cartridge (44), and compressor cover (40), as shown.
Lubricate the threads of four bolts (92) and the threads of two bolts (90) with 5P-3931 Anti-Seize Compound prior to installation. Install four bolts (92) that hold turbine housing (69) to the exhaust manifold. Install two bolts (90) that hold drain elbow (91) to cartridge (44).
Illustration 4 g00564148
Illustration 5 g00564147
These views are of the right side at the front of the engine.
Install turbocharger gasket (88) to the exhaust manifold. Install gasket (82) to drain elbow (84).
Position a suitable lifting device (not shown) on turbine housing (86), cartridge (83), and compressor cover (31). Secure the lifting device to a hoist. Position turbine housing (86), cartridge (83), and compressor cover (31), as shown.
Lubricate the threads of four bolts (87) and the threads of two bolts (85) with 5P-3931 Anti-Seize Compound prior to installation. Install four bolts (87) that hold turbine housing (86) to the exhaust manifold. Install two bolts (85) that hold drain elbow (84) to cartridge (83).
Illustration 6 g00564145
Illustration 7 g00564144
These views are of the left side at the rear of the engine.
Install turbocharger gasket (81) to the exhaust manifold. Install gasket (76) to drain elbow (77).
Position a lifting device (not shown) on turbine housing (79), cartridge (75), and compressor cover (24). Secure the lifting device to a suitable hoist. Position turbine housing (79), cartridge (75), and compressor cover (24), as shown.
Lubricate the threads of four bolts (80) and the threads of two bolts (78) with 5P-3931 Anti-Seize Compound prior to installation. Install four bolts (80) that hold turbine housing (79) to the exhaust manifold. Install two bolts (78) that hold drain elbow (77) to cartridge (75).
Illustration 8 g00564142
Illustration 9 g00564140
These views are of the right side at the rear of the engine.
Install turbocharger gasket (73) to the exhaust manifold. Install gasket (70) to drain elbow (71).
Position a suitable lifting device (not shown) on turbine housing (66), cartridge (50), and compressor cover (26). Secure the lifting device to a hoist. Position turbine housing (66), cartridge (50), and compressor cover (24), as shown.
Lubricate the threads of four bolts (74) and the threads of two bolts (72) with 5P-3931 Anti-Seize Compound prior to installation. Install four bolts (74) that hold turbine housing (66) to the exhaust manifold. Install two bolts (72) that hold drain elbow (71) to cartridge (50).
Illustration 10 g00564139
This is a view of the left side of the engine.
Tighten clamp (68) that holds coupling (67) to turbine housing (69) to a torque of 9.5 1 N m (7 0.7 lb ft). Tap clamp (68) lightly in order to ensure that clamp (68) is properly seated. Tighten clamp (68) again to a torque of 9.5 1 N m (7 0.7 lb ft). Repeat this procedure for the other clamp.