0585236 STOP SWITCH ASSY. JOHNSON
BJ40EECR, BJ40EEDS, BJ40EEEA, BJ40EEUC, BJ40ELSIF, BJ40ELSSM, BJ50BEEDS, BJ50EEER, BJ50ELSIF, BJ50ELSSA, BJ50ESECC, BJ50RLEUC, J40PLSOC, J40PLSRS, J50PLSOC, J50PLSRS
STOP
Price: query
Rating:
Number on catalog scheme: 7
Compatible models:
BRP JOHNSON entire parts catalog list:
- STEERING & SHIFT HANDLE » 0585236
BJ40EEEA, BJ40ELEEA, BJ40PLEEA, J40PLEEA, J40REEA, J40RLEEA, J40TPLEEA 1999
BJ40EEUC, BJ40ELEUC, BJ40TLEUC, HJ40REUC, HJ40RLEUC, J40ELEUC, J40REUC, J40RLEUC, J40TEEUC, J40TELEUC, J40TLEUC, J40TTLEUC 1997
BJ40ELSIF, BJ40ESIF, BJ40PLSIF, J40PLSIF, J40RLSIF, J40RSIF, J40TPLSIF 2001
BJ40ELSSM, BJ40ESSM, BJ40PLSSM, J40PLSSM, J40RLSSM, J40RSSM, J40TPLSSM 2000
BJ50BEEDS, BJ50BELEDS, BJ50TLEDS, J50JEDS, J50TLEDS 1996
BJ50EEER, BJ50ELEER, BJ50PLEEA, BJ50RLEEA, J50ELEER, J50PLEEA 1999
BJ50ELSIF, BJ50ESIF, BJ50PLSIF, BJ50RLSIF, J50ELSIF, J50PLSIF, RJ50ELSIF 2001
BJ50ELSSA, BJ50ESSA, BJ50PLSSM, BJ50RLSSM, J50ELSSA, J50PLSSM 2000
BJ50ESECC, BJ50RLECR, BJ50TLECR, BJ50TSLECC, J50ESLECC, J50TLECR, J50TSLECC, X50ESLECC 1998
BJ50RLEUC, BJ50TLEUC, BJ50TSLEUS, J50ESLEUR, J50JEUC, J50TLEUC, J50TSLEUS 1997
J40PLSOC 2005
J40PLSRS 2004
J50PLSOC 2005
J50PLSRS 2004
Information:
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
The following article has the proper guidelines for starting Caterpillar Engines in temperatures 9 °C (48 °F) to −40 °C (−40 °F). Please follow the instructions below if your engine is experiencing cold starting problems.Solution
Starting The Engine in Cold Temperatures
Make sure that the air inlet heater is turned on. Also make sure that the continuous flow ether is turned on. Use an electronic technician to make sure that both the air inlet heater and the continuous flow ether are turned on. Consult your local Caterpillar Dealer for more information.
Make sure that the ether bottle has enough ether in order to help start the engine. The ether bottle can be checked by removing the ether bottle and shaking the ether bottle. Replace the ether bottle if the bottle is empty.
Install the correct lubricant in each compartment before the engine is exposed to cold weather. See the chart below for the availability of oil for either Caterpillar or other commercial lubricants.
Table 1
Availability of Oil
Description of Oil Oil Viscosity Grades
Available Oils from Caterpillar SAE 15W-40, 10W-30, 5W-40, and 0W-30
Available Oils from Commercial Companies SAE 10W-40, 5W-30, and 0W-40
Table 2
Categories of Cold Weather
Category Temperature Range for Starting the Engine Maximum Oil Viscosity Grade
Category 1
9 °C (48 °F) to
−9.5 °C (15 °F) SAE 15W-40
Category 2
−9.5 °C (15 °F) to
−18 °C (0 °F) SAE 10W-30
Category 3
−18 °C (0 °F) to
−30 °C (−22 °F) SAE 5W-40
Category 4
−30 °C (−22 °F) to
−40 °C (−40 °F) SAE 0W-40 Category 1
Temperature Range for Starting the Engine 9 °C (48 °F) to −9.5 °C (15 °F)Caterpillar Engines will not require any starting aid in this temperature range of altitudes less than 460 m (1509 ft). A starting aid might also be necessary for Caterpillar Engines in this temperature range of altitudes greater than 460 m (1509 ft).
Table 3
Category 1
Altitude Engine Model Starting Aid
Recommended Optional
0 m ( 0 ft) to
460 m (1509 ft) All Models None None
Greater than
460 m (1509 ft) 3126B, C-9, C7, and C9 Continuous Flow Ether None
All other Caterpillar models None None Note: Continuous flow ether is controlled by the engine software. Continuous flow ether DOES NOT require manual operation during starting.Note: Use only Caterpillar 15W-40, Caterpillar 10W-30 and any SAE multigrade that meets Engine Crankshaft Fluid (ECF)-1. Also refer to the engines Operation and Maintenance Manual or refer to Special Instruction, SEBU6250, "Caterpillar Machine Fluids Recommendations ".Category 2
Temperature Range for Starting the Engine −9.5 °C (15 °F) to −18 °C (0 °F)
Table 4
Category 2
Altitude Engine Model Starting Aid
Recommended Optional
All Models All Models Continuous Flow Ether Coolant Heater
Battery that is Heavy Duty and a Starter Package Note: Use only Caterpillar 10W-30 or a lower viscosity SAE multigrade that meets ECF-1. Also refer to the engines Operation and Maintenance Manual or refer to Special Instruction, SEBU6250, "Caterpillar Machine Fluids Recommendations ". Do not use SAE 15W-40 oil viscosity grade or any SAE 15W-XX multigrade oil in category 2.Category 3
Temperature Range for Starting the Engine −18 °C (0 °F) to −30 °C (−22 °F)
Table 5
Category 3
Altitude Engine Model Starting Aid
All Models All Models Recommended Optional
Continuous Flow Ether Oil Heater
Coolant Heater Fuel Heater
Battery that is Heavy Duty and a Starter Package Warmer for the Battery Note: Consult with a local Caterpillar Dealer about availability for your machine model.Note: Use only Caterpillar 5W-40 or a lower viscosity SAE multigrade that meets ECF-1. Also refer to the engines Operation and Maintenance Manual or refer to Special Instruction, SEBU6250, "Caterpillar Machine Fluids Recommendations ". Do not use SAE 15W-40 or 10W-30 oil viscosity grade or any SAE 15W-XX or 10W-XX multigrade oil in category 3.Category 4
Temperature Range for Starting the Engine −30 °C (−22 °F) to −40 °C (−40 °F)
Table 6
Category 4
Altitude Engine Model Starting Aid
All Models All Models Recommended Optional
Continuous Flow Ether Oil Heater
Coolant Heater Fuel Heater
Battery that is Heavy Duty and a Starter Package Warmer for the Battery
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
The following article has the proper guidelines for starting Caterpillar Engines in temperatures 9 °C (48 °F) to −40 °C (−40 °F). Please follow the instructions below if your engine is experiencing cold starting problems.Solution
Starting The Engine in Cold Temperatures
Make sure that the air inlet heater is turned on. Also make sure that the continuous flow ether is turned on. Use an electronic technician to make sure that both the air inlet heater and the continuous flow ether are turned on. Consult your local Caterpillar Dealer for more information.
Make sure that the ether bottle has enough ether in order to help start the engine. The ether bottle can be checked by removing the ether bottle and shaking the ether bottle. Replace the ether bottle if the bottle is empty.
Install the correct lubricant in each compartment before the engine is exposed to cold weather. See the chart below for the availability of oil for either Caterpillar or other commercial lubricants.
Table 1
Availability of Oil
Description of Oil Oil Viscosity Grades
Available Oils from Caterpillar SAE 15W-40, 10W-30, 5W-40, and 0W-30
Available Oils from Commercial Companies SAE 10W-40, 5W-30, and 0W-40
Table 2
Categories of Cold Weather
Category Temperature Range for Starting the Engine Maximum Oil Viscosity Grade
Category 1
9 °C (48 °F) to
−9.5 °C (15 °F) SAE 15W-40
Category 2
−9.5 °C (15 °F) to
−18 °C (0 °F) SAE 10W-30
Category 3
−18 °C (0 °F) to
−30 °C (−22 °F) SAE 5W-40
Category 4
−30 °C (−22 °F) to
−40 °C (−40 °F) SAE 0W-40 Category 1
Temperature Range for Starting the Engine 9 °C (48 °F) to −9.5 °C (15 °F)Caterpillar Engines will not require any starting aid in this temperature range of altitudes less than 460 m (1509 ft). A starting aid might also be necessary for Caterpillar Engines in this temperature range of altitudes greater than 460 m (1509 ft).
Table 3
Category 1
Altitude Engine Model Starting Aid
Recommended Optional
0 m ( 0 ft) to
460 m (1509 ft) All Models None None
Greater than
460 m (1509 ft) 3126B, C-9, C7, and C9 Continuous Flow Ether None
All other Caterpillar models None None Note: Continuous flow ether is controlled by the engine software. Continuous flow ether DOES NOT require manual operation during starting.Note: Use only Caterpillar 15W-40, Caterpillar 10W-30 and any SAE multigrade that meets Engine Crankshaft Fluid (ECF)-1. Also refer to the engines Operation and Maintenance Manual or refer to Special Instruction, SEBU6250, "Caterpillar Machine Fluids Recommendations ".Category 2
Temperature Range for Starting the Engine −9.5 °C (15 °F) to −18 °C (0 °F)
Table 4
Category 2
Altitude Engine Model Starting Aid
Recommended Optional
All Models All Models Continuous Flow Ether Coolant Heater
Battery that is Heavy Duty and a Starter Package Note: Use only Caterpillar 10W-30 or a lower viscosity SAE multigrade that meets ECF-1. Also refer to the engines Operation and Maintenance Manual or refer to Special Instruction, SEBU6250, "Caterpillar Machine Fluids Recommendations ". Do not use SAE 15W-40 oil viscosity grade or any SAE 15W-XX multigrade oil in category 2.Category 3
Temperature Range for Starting the Engine −18 °C (0 °F) to −30 °C (−22 °F)
Table 5
Category 3
Altitude Engine Model Starting Aid
All Models All Models Recommended Optional
Continuous Flow Ether Oil Heater
Coolant Heater Fuel Heater
Battery that is Heavy Duty and a Starter Package Warmer for the Battery Note: Consult with a local Caterpillar Dealer about availability for your machine model.Note: Use only Caterpillar 5W-40 or a lower viscosity SAE multigrade that meets ECF-1. Also refer to the engines Operation and Maintenance Manual or refer to Special Instruction, SEBU6250, "Caterpillar Machine Fluids Recommendations ". Do not use SAE 15W-40 or 10W-30 oil viscosity grade or any SAE 15W-XX or 10W-XX multigrade oil in category 3.Category 4
Temperature Range for Starting the Engine −30 °C (−22 °F) to −40 °C (−40 °F)
Table 6
Category 4
Altitude Engine Model Starting Aid
All Models All Models Recommended Optional
Continuous Flow Ether Oil Heater
Coolant Heater Fuel Heater
Battery that is Heavy Duty and a Starter Package Warmer for the Battery