0332475 TAB,TRIM JOHNSON
J40ECEC, J40EEIA, J40EENJ, J40EERE, J40EESR, J40EETB, J48ESLCER, J48ESLCER, J48ESLEIM, J48ESLEIM, J48ESLENB, J48ESLENB, J48ESLERD, J48ESLERD, J48ESLESA, J48ESLESA, J48ESLETE, J48ESLETE, J50BECEC, J50BEEIA, J50BEENJ, J50BEERE, J50BEESR, J50BEETB, J50T
TAB
Price: query
You can buy parts:
As an associate, we earn commssions on qualifying purchases through the links below
Number on catalog scheme: 33247
Compatible models:
BRP JOHNSON entire parts catalog list:
- GEARCASE » 0332475
J40EENJ, J40EENM, J40ELENJ, J40ELENM, J40RENM, J40RLENM, J40TEENJ, J40TEENM, J40TELENJ, J40TELENM, J40TLENJ, J40TLENM, J40TTLENM, TJ40ELENJ, TJ40ELENM, VJ40EENJ, VJ40EENM, VJ40ELENJ, VJ40ELENM, VJ40TELENJ, VJ40TELENM, VJ40TLENJ, VJ40TLENM 1992
J40EERE, J40ELERE, J40RERE, J40RLERE, J40TEERE, J40TELERE, J40TLERE, J40TTLERE 1994
J40EESR, J40ELESR, J40RESR, J40RLESR, J40TEESR, J40TELESR, J40TLESR, J40TTLESR, TJ40ELESF, TJ40ELESR, TJ40TELESF, TJ40TELESR, VJ40EESR, VJ40ELESR, VJ40TELESR, VJ40TLESR 1990
J40EETB, J40ELETB, J40RETB, J40RLETB, J40TEETB, J40TELETB, J40TLETB, J40TLETF, J40TTLETB, J40TTLETF, TJ40ELETB, VJ40EETB, VJ40ELETB, VJ40TELETB, VJ40TLETB, VJ40TLETF 1993
J48ESLCER, VJ48ESLCER 1989
J48ESLCER, VJ48ESLCER 1989
J48ESLEIM 1991
J48ESLEIM 1991
J48ESLENB, VJ48ESLENB 1992
J48ESLENB, VJ48ESLENB 1992
J48ESLERD 1994
J48ESLERD 1994
J48ESLESA, VJ48ESLESA 1990
J48ESLESA, VJ48ESLESA 1990
J48ESLETE, TJ48ESLETE, VJ48ESLETE 1993
J48ESLETE, TJ48ESLETE, VJ48ESLETE 1993
J50BECEC, J50BELCEC, J50TLCEC, TJ50TLCEC, TJ50TLESF 1989
J50BEEIA, J50BELEIA, J50JEIA, J50TELEIA, J50TLEIA, VJ50BEEIA, VJ50BELEIA, VJ50TLEIA 1991
J50BEENJ, J50BEENM, J50BELENJ, J50BELENM, J50JENJ, J50JENM, J50TELENM, J50TLENJ, J50TLENM, VJ50BEENJ, VJ50BEENM, VJ50BELENJ, VJ50BELENM, VJ50TELENM, VJ50TLENJ, VJ50TLENM 1992
J50BEERE, J50BELERE, J50JERE, J50TELERE, J50TLERE 1994
J50BEESR, J50BELESR, J50TELESR, J50TLESR, TJ50TLESF, TJ50TLESR, VJ50BEESR, VJ50BELESR, VJ50TLESR 1990
J50BEETB, J50BELETB, J50JETB, J50TELETB, J50TLETB, J50TLETF, VJ50BEETB, VJ50BELETB, VJ50TLETB, VJ50TLETF 1993
J50TELCEC 1989
Information:
Illustration 1 g06475558
Illustration 2 g06475563
Section B-B
Table 1
Item Qty Part Specification Description
1 8 218-8655 Bolt Use the following procedure to tighten the bolt using torque-turn method:
1. Tighten to SAS (Start Angle Snug) 8 1 N m (71 9 lb in).
2. Rotate the fasteners to 24 2 degrees.
3. Final minimum torque to 8 N m (71 lb in).
Use the following procedure to tighten the bolt using torque method:
Torque to 10.2 2.0 N m (90.3 17.7 lb in).
2 4 228-5897 Bolt Use the following procedure to tighten the bolt using torque-turn method:
1. Tighten to SAS (Start Angle Snug) 17 2 N m (150 18 lb in).
2. Rotate the fasteners to 81 2 degrees.
3. Final minimum torque to 25 N m (221 lb in).
Use the following procedure to tighten the bolt using torque method:
Torque to 33 5 N m (292 44 lb in).
3 3 313-4620 Screw Use the following procedure to tighten the screw using torque-turn method:
1. Tighten to SAS (Start Angle Snug) 6 N m (53 lb in).
2. Rotate the fasteners to 30 1 degrees.
3. Final minimum torque to 9 N m (80 lb in).
Use the following procedure to tighten the screw using torque method:
Torque to 10 1 N m (89 9 lb in).
4 1 153-7036 Spool Install the cartridge until fully seated against the shoulder of block.
Install retainer until fully seated against cartridge to eliminate endplay.
5 3 179-1218 Bolt Use the following procedure to tighten the bolt using torque method:
Torque to 4.10 0.25 N m (36.29 2.21 lb in).
6 1 8C-6711 Retainer Nut Use the following procedure to tighten the nut using torque method:
Torque to 5.5 0.5 N m (48.7 4.4 lb in).
7 1 5C-2890 Nut Use the following procedure to tighten the nut using torque method:
Torque to 8 1 N m (71 9 lb in).
8 1 1N-8062 Needle Bearing As Install the bearing so that end with the bearing ident number is oriented as shown in Illustration 2.
Press the bearing into bore of barrel to the depth (D3) of 28.9 0.2 mm (1.4 0.01 inch) as shown in Illustration 2.
9 1 212-6315 Barrel Install the bearing so that end with the bearing ident number is oriented as shown in Illustration 2.
Press the retainer into bore of barrel to the depth (D4) of 4 0.2 mm (0.2 0.01 inch) as shown in Illustration 2.
D1 - - Press pin into block to obtain pin protrusion length of 3.7 to 3.9 mm (0.14567 to 0.15354 inch) from block surface as shown in Illustration 1.
D2 - - Press pin into block to obtain pin protrusion length of 3.7 to 3.9 mm (0.14567 to 0.15354 inch) from block surface as shown in Illustration 1.
- - - At 3300 rpm, minimum flow at 28 MPa (4061 psi) should be 30 L/min (8 US gpm).
- - - At 3300 rpm, relief valve minimum VOP should be 31 MPa (4496 psi).
- - - At 3300 rpm, full relief maximum valve bypass pressure at deadhead of maximum outlet flow at 0.10 L/min (0.02 US gpm) should be 38 MPa (5511 psi).
- - - At 1000 rpm, maximum pump pressure should be 6 MPa (870 psi).
- - - Pump supply pressure should be 200 to 450 kPa (29 to 65 psi).