0583891 JOHNSON WARNING HORN


0583891 WARNING HORN JOHNSON HJ55WMLM, J100STLCEM, J100STLESB, J100WTLESM, J100WTLZ, J10EESC, J110MLCEM, J115MLESB, J120TLAEM, J120TLASB, J125ESXESS, J125ESXW, J125WTPLE, J140CXCEC, J140CXESR, J150CXCEM, J150CXESB, J150STLCEM, J150STLESB, J155WTLESM, J155WTLZ, J15EESR, J175STLCE WARNING
0583891 WARNING HORN JOHNSON
Rating:
98

Buy WARNING HORN 0583891 JOHNSON genuine, new aftermarket parts with delivery
Number on catalog scheme: 4
 

BRP JOHNSON entire parts catalog list:

HJ55WMLM 1996
J100STLCEM 1989
J100STLESB, VJ100SLESB 1990
J100WTLESM, J100WTXESM 1990
J100WTLZ, J100WTXZ 1989
J10EESC, J10ELESC, J10RELESC, J10RESC, J10RLESC, J10SELESC, TJ10ELESC, TJ10RELESC, TJ10RLESC 1990
J110MLCEM, J110TLAEM, J110TLCEM, J110TXCEM, TJ110TLCEM, TJ110TXCEM 1989
J115MLESB, J115TLASB, J115TLESB, J115TXESB, TJ115TLESB, VJ115TLASB, VJ115TLESB, VJ115TXESB 1990
J120TLAEM, J120TLCEM, J120TXCEM, TJ120TXCEM 1989
J120TLASB, J120TLESB, J120TXESB, VJ120TLASB, VJ120TLESB, VJ120TXESB 1990
J125ESXESS 1990
J125ESXW 1989
J125WTPLE 1995
J140CXCEC, J140TLAEB, J140TLCEB, J140TXCEB 1989
J140CXESR, J140TLASE, J140TLESE, J140TXESE, VJ140TLASE, VJ140TLESE, VJ140TXESE 1990
J150CXCEM, J150TLAEM, J150TLCEM, J150TXCEM, TJ150TXCEM 1989
J150CXESB, J150TLASB, J150TLESB, J150TXESB, VJ150TLESB, VJ150TXESB 1990
J150STLCEM, TJ150SLCEM 1989
J150STLESB, TJ150SLESB, VJ150SLESB 1990
J155WTLESM, J155WTXESM 1990
J155WTLZ, J155WTXZ 1989
J15EESR, J15ELESR, J15RELESR, J15RESR, J15RLESR 1990
J175STLCEB, J175TXCEB 1989
J175STLESE, J175TXESE, VJ175SLESE, VJ175TXESE 1990
J185ESXESS 1990
J185ESXW 1989
J200CXCEA, J200STLCEB, J200TXCEA, TJ200TXCEA 1989
J200CXESM, J200STLESE, J200TXESM, VJ200SLESE, VJ200TXESM 1990
J20ECEM, J20ELCEM 1989
J20EESB, J20ELESB 1990
J225CXCED, J225PLAED, J225PLCED, J225PXCED, J225TLAED, J225TLCED, J225TXCED 1989
J225CXESS, J225PLASS, J225PLESS, J225PXESS, J225TLASS, J225TLESS, J225TXESS, VJ225PLESS, VJ225PXESS, VJ225TLASS, VJ225TLESS, VJ225TXESS 1990
J25ECEB, J25ELCEB, TJ25ELCEB, TJ25ELESF 1989
J25EESE, J25ELESE, TJ25ELESE, VJ25ELESE 1990
J28ESLCEA, VJ28ESLCEA 1989
J28ESLCEA, VJ28ESLCEA 1989
J28ESLESM, VJ28ESLESM 1990
J28ESLESM, VJ28ESLESM 1990
J300CXCEM, J300PLCEM, J300PXCEM 1989
J300CXESB, J300PLESB, J300PXESB 1990
J30ECED, J30ELCED, TJ30ELCED, TJ30ELESF 1989
J30EESS, J30ELESS 1990
J40ECEC, J40ELCEC, J40RCEC, J40RLCEC, J40TECEC, J40TELCEC, J40TLCEC, J40TTLCEC, TJ40ELCEC 1989
J40EESR, J40ELESR, J40RESR, J40RLESR, J40TEESR, J40TELESR, J40TLESR, J40TTLESR, TJ40ELESF, TJ40ELESR, TJ40TELESF, TJ40TELESR, VJ40EESR, VJ40ELESR, VJ40TELESR, VJ40TLESR 1990
J45RCE, J45RCLE, J45WMLE 1989
J45RCEIA, J45RCLEIA, J45WMLEIA 1991
J45RCENM, J45RCLENM, J45WMLENM 1992
J45RCESR, J45RCLESR, J45WMLESR 1990
J48ESLCER, VJ48ESLCER 1989
J48ESLCER, VJ48ESLCER 1989
J48ESLESA, VJ48ESLESA 1990
J48ESLESA, VJ48ESLESA 1990
J50BECEC, J50BELCEC, J50TLCEC, TJ50TLCEC, TJ50TLESF 1989
J50BEESR, J50BELESR, J50TELESR, J50TLESR, TJ50TLESF, TJ50TLESR, VJ50BEESR, VJ50BELESR, VJ50TLESR 1990
J50TELCEC 1989
J55RWLE 1989
J55RWLEIA 1991
J55RWLENM 1992
J55RWLESR 1990
J60ELCEA, J60TLCEA, J60TTLCEA, TJ60TLCEA, TJ60TLESF 1989
J60ELESM, J60TLESM, J60TTLESM, TJ60TLESF, TJ60TLESM, VJ60ELESM, VJ60TLESM 1990
J65WMLESM 1990
J65WMLZ 1989
J70ELCEM, J70TLCEM, TJ70TLCEM, TJ70TLESF 1989
J70ELESB, J70TLESB, TJ70TLESB, TJ70TLESF, VJ70ELESB, VJ70TLESB 1990
J88MSLCER, J90TLAEM, J90TLCEM, TJ90TLCEM, VJ88MSLCER 1989
J88MSLCER, VJ88MSLCER 1989
J88MSLESA, VJ88MSLESA 1990
J88MSLESA, J90TLASB, J90TLESB, TJ90TLESB, VJ88MSLESA, VJ90MLESB, VJ90TLASB, VJ90TLESB 1990
SJ125WTPLV, SJ125WTPXV 1996
TJ30ELESS, VJ30EESS, VJ30ELESS 1990

Information:


Table 1
J1939 Code and Description CDL Code and Description Comments
1180-3
Engine Turbocharger 1 Turbine Inlet Temperature : Voltage Above Normal 3908-3
Engine Turbocharger #1 Turbine Intake Temperature Sensor : Voltage Above Normal If the signal from the other exhaust temperature sensor is OK, the signal from that sensor is used. If the signal from the other exhaust temperature sensor is not OK, a default value of 0 °C (32 °F) is used.
The code is logged.
1180-4
Engine Turbocharger 1 Turbine Inlet Temperature : Voltage Below Normal 3908-4
Engine Turbocharger #1 Turbine Intake Temperature Sensor : Voltage Below Normal If the signal from the other exhaust temperature sensor is OK, the signal from that sensor is used. If the signal from the other exhaust temperature sensor is not OK, a default value of 0 °C (32 °F) is used.
The code is logged.
1180-8
Engine Turbocharger 1 Turbine Inlet Temperature : Abnormal Frequency, Pulse Width, or Period 3908-8
Engine Turbocharger #1 Turbine Intake Temperature Sensor : Abnormal Frequency, Pulse Width, or Period If the signal from the other exhaust temperature sensor is OK, the signal from that sensor is used. If the signal from the other exhaust temperature sensor is not OK, a default value of 0 °C (32 °F) is used.
The code is logged.
1181-3
Engine Turbocharger 2 Turbine Inlet Temperature : Voltage Above Normal 3909-3
Engine Turbocharger #2 Turbine Intake Temperature Sensor : Voltage Above Normal If the signal from the other exhaust temperature sensor is OK, the signal from that sensor is used. If the signal from the other exhaust temperature sensor is not OK, a default value of 0 °C (32 °F) is used.
The code is logged.
1181-4
Engine Turbocharger 2 Turbine Inlet Temperature : Voltage Below Normal 3909-4
Engine Turbocharger #2 Turbine Intake Temperature Sensor : Voltage Below Normal If the signal from the other exhaust temperature sensor is OK, the signal from that sensor is used. If the signal from the other exhaust temperature sensor is not OK, a default value of 0 °C (32 °F) is used.
The code is logged.
1181-8
Engine Turbocharger 2 Turbine Inlet Temperature : Abnormal Frequency, Pulse Width, or Period 3909-8
Engine Turbocharger #2 Turbine Intake Temperature Sensor : Abnormal Frequency, Pulse Width, or Period If the signal from the other exhaust temperature sensor is OK, the signal from that sensor is used. If the signal from the other exhaust temperature sensor is not OK, a default value of 0 °C (32 °F) is used.
The code is logged. Refer to the application-specific wiring schematic for pin locations.
Table 2
Troubleshooting Test Steps Values Results
1. Check for Codes
A. Connect Cat® Electronic Technician (ET) to the service tool connector.
B. Determine if a code is active or logged.
Codes
Result: A -3 code is active or logged.
Proceed to Test Step 2.
Result: A -4 code is active or logged.
Proceed to Test Step 3.
Result: A -8 code is active or logged.
Proceed to Test Step 5.
2. Create a Short at the Sensor Connector
A. Turn the keyswitch to the OFF position.
B. Disconnect the sensor with the active -3 code.
C. Install the jumper wire between the following terminals at the sensor connector:
- Pin 2 (sensor return) and Pin 3 (sensor signal)
D. Connect Cat ET.
E. Use Cat ET to monitor the following:
- -4 code
F. Turn the keyswitch to the OFF position.
Create a Short
Result: A -4 code became active.
Repair: The wiring harness is OK. Replace the sensor.
Verify that the repair eliminated the problem.
Result: A -4 code did not become active.
Proceed to Test Step 4.
3. Create an Open at the Sensor Connector
A. Turn the keyswitch to the OFF position.
B. Disconnect the sensor with the active -4 code.
C. Connect Cat ET.
D. Use Cat ET to monitor the following:
- -3 code
E. Turn the keyswitch to the OFF position.
Create an Open
Result: A -3 code became active.
Repair: The wiring harness is OK. Replace the sensor.
Verify that the repair eliminated the problem.
Result: A -3 code did not become active.
Proceed to Test Step 4.
4. Check the 8 VDC Supply Voltage at the Sensor Connector
A. Turn the keyswitch to the ON position.
B. Measure the voltage at the following pin locations of the affected sensor connector:
- Pin 1 and Pin 2
C. Reconnect the sensor.
Supply Voltage
Result: The supply voltage is approximately 8.0 0.2 VDC
Proceed to Test Step 8.
Result: The supply voltage is not approximately 8.0 0.2 VDC.
Repair: There is a short in the wiring harness to the battery. Repair or replace the wiring harness.
If the problem is not resolved, proceed to Test Step 5.
5. Check the PWM Circuit for an Open
A. Turn the keyswitch to the OFF position.
B. Disconnect the sensor with the active -8 code.
C. Disconnect the J2 connector at the Electronic Control Module (ECM).
D. Measure the resistance between the following locations for the sensor:
- Pin 3 (sensor connector) and the appropriate PWM signal wire on the ECM connector
Open


Parts warning JOHNSON:

0176458
 
0176458 WARNING HORN & CABLE
HJ55WMLM, HJ55WMLZ, SJ65WMLM, SJ65WMLZ2
Back to top