80105M Mariner CHECK VALVE ASS'Y...

Illustration 1 g00787294
Engine control for the turbocharged 3054 Marine engine (9) Manual stop lever (10) Selection lever for engine speed (RPM) (11) Anchor point for throttle cable (12) Typical throttle cable (13) Run (14) Stop (15) Idle (16) Full speedA throttle cable (12) will need to be installed to the selection lever (10). The type of cable and the length of cable will depend on the type of installation and the vessel.A fuel shutoff solenoid is equipped with the turbocharged 3054 Marine engine. However, a cable for the manual stop lever (9) should also be installed. This will ensure that the engine can be shut off manually. Refer to the Operation and Maintenance Manual, "Manual Stop Procedure" for information on stopping the engine manually.Note: A mechanical linkage or a cable will need to be installed on the marine transmission. This will enable the selection of the proper gear. Refer to the literature that is provided by the OEM of the transmission.Naturally Aspirated 3054B Marine Engine
Illustration 2 g00787293
Engine controls for the naturally aspirated 3054B Marine engine (1) Manual stop lever (2) Selection lever for engine speed (RPM) (3) Anchor point for throttle cable (4) Typical throttle cable (5) Run (6) Stop (7) Idle (8) Full speedA throttle cable (4) will need to be installed to the selection lever (2). The type of cable and the length of cable will depend on the type of installation and the vessel.A fuel shutoff solenoid is equipped with the naturally aspirated 3054B Marine engine. However, a cable for the manual stop lever (1) should also be installed. This will ensure that the engine can be shut off manually. Refer to the Operation and Maintenance Manual, "Manual Stop Procedure" for information on stopping the engine manually.Note: A mechanical linkage or a cable will need to be installed on the marine transmission. This will enable the selection of the proper gear. Refer to the literature that is provided by the OEM of the transmission.Naturally Aspirated 3056 Marine Engine
Illustration 3 g00787305
Engine control for the naturally aspirated 3056 Marine engine (1) Manual stop lever (2) Selection lever for engine speed (RPM) (3) Typical throttle cable (4) Run (5) Stop (6) Idle (7) Full speedA throttle cable (3) will need to be installed to the selection lever (2). The type of cable and the length of cable will depend on the type of installation and the vessel.A fuel shutoff solenoid is equipped with the naturally aspirated 3056 Marine engine. However, a cable for the manual stop lever (1) should also be installed. This will ensure that the engine can be shut off manually. Refer to the Operation and Maintenance Manual, "Manual Stop Procedure" for information on stopping the engine manually.Note: A mechanical linkage or a cable will need to be installed on the marine transmission. This will enable the selection of the proper gear. Refer to the literature that is provided by the OEM of the transmission.Turbocharged Aftercooled 3056 Marine Engine
Illustration 4 g00787291
(8) Selection lever for engine speed (RPM) (9) Manual stop lever (10) Anchor point for throttle cable (11) Typical throttle cable (12) Idle (13) Full speed (14) Stop (15) RunA throttle cable (11) will need to be installed to the selection lever (8). The type of cable and the length of cable will depend on the type of installation and the vessel.A fuel shutoff solenoid is equipped with the turbocharged aftercooled 3056 Marine engine. However, a cable for the manual stop lever (9) should also be installed. This will ensure that the engine can be shut off manually. Refer to the Operation and Maintenance Manual, "Manual Stop Procedure" for information on stopping the engine manually.Note: A mechanical linkage or a cable will need to be installed on the marine transmission. This will enable the selection of the proper gear. Refer to the literature that is provided by the OEM of the transmission.