84411M Mariner HOOK, WIRE

Illustration 1 g00999867
Typical displayThe Engine Monitoring System (EMS) displays various parameters for the engine and the transmission. EMS provides excellent visibility in various conditions of lighting. EMS also supports the connections for the backlights.The engine ECM monitors the following information.
Operating parameters for the engine
Diagnostic informationThe engine ECM processes this information and the information is then transmitted to the Engine Monitoring System through the CAT Data Link. The main EMS display unit receives information and this unit also displays information. Only two wires are required from the ECM to the display. The two wires receive all of the operating parameters for the engine and the diagnostic information.The EMS incorporates three individual gauge units. The EMS can be installed in various locations.One Main EMS Gauge Unit is required for each desired operator station. The Tachometer and Quad Gauge Modules are optional. These gauges will NOT operate without a connection to a Main EMS Gauge Unit.The Main EMS Gauge Unit has ten indicators (two rows of five) which display diagnostics that are related to the system. A digital LCD display shows the parameters for the engine and the parameters for the transmission that are monitored.Monitored parameters include the following parameters.
Engine speed
Engine oil pressure
Engine coolant temperature
Inlet manifold temperature
Engine boost
Battery voltage
Fuel rate
Fuel pressure
Fuel temperature
Engine hours
Engine load (percent load)
Accessory temperature
Accessory pressureThe Quad Gauge Module has warning zones that are on a scale. This module displays the following functions in an analog format.
Engine oil pressure
Engine coolant temperature
Fuel pressure
Battery voltageInstallation
Required Parts
Use the following chart in order to determine the parts that are required for the installation of the Engine Monitoring System (EMS). Note: NO additional connections are allowed to any wires that are detailed and described in this publication without the approval of Caterpillar.
Table 1
Required Parts for Display Module    
Main Station with 121-4017 Wiring Harness    
Part Number     Description     Qty    
Gauge Modules    
198-9749     Main Gauge Display     1    
133-4860     Film     1    
190-3484     Tachometer Module     1    
166-6936     Quad Gauge Module     1    
117-6601     Bezel     3    
7Y-7388     Screw (M5)     12    
8T-3992     Screw (M6)     9    
143-5018     Data Link Cable (Fabricate Cable to Length)     N/A    
Hardware Description for the 121-4017 Wiring Harness    
186-3736     Connector Socket     13    
121-4017     Wiring Harness     1    
155-2255     Connecting Plug Kit (12 Socket)     1    
3E-5177     Plug Lock Wedge     1    
118-5075     Miniature Lamp (Backlight Lamp)     4    
3E-8775     Switch (Scroll Forward and Backward)     1    
165-5674     Diode Lamp (Switch Backlight)     3    
155-2705     Rocker Actuator     1    
2N-2371     Indicator Lamp     1    
7N-5876     Lamp (24V)     1    
3E-8766     US/Metric Display Switch (Illuminated)     1    
155-2706     Rocker Actuator     1    
(1)     Dimmer Potentiometer     1    
123-9694     Horn     1    
OR    
9G-9813     Alarm     1    
Remote Station    
190-3484     Tachometer Module     1    
OR    
166-6941     Quad Gauge Module     1    
AND    
117-6601     Bezel     1    
7Y-7388     Screw (M5)     4    
8T-3992     Screw (M6)     3    
155-2274     Connecting Plug Kit     1    
3E-5177     Plug Lock Wedge     1    
(2)     16 AWG wire     N/A    
155-2265     Connecting Plug Kit     1    
155-2259