11025 2 OWNER'S MANUAL Mariner
7075524
OWNER
Price: query
You can buy parts:
As an associate, we earn commssions on qualifying purchases through the links below
$146.96
23-04-2023
11.0[4.95] Pounds
-: -
New Premium USA! Made Alternator fits Prairie Windrower 4800/4900 Series 1989-1997 Westward Windrower 7000 239 Cummins Dsl 1986-1997 White Combine 8920 9700 9720 10-252, 8MR2033TS, 110-252, 8MR2033T
New Motorola Aftermarket USA Made IREF 12 Volt 90 Amp 5/8 Shaft || Meets or Exceeds OEM Specifications || One Year Warranty || 100% Computer Load Tested for Reliability || 10459541 A-9160, 109-12107, 90-05-9104 7471N-USA, 1336073C1, 132-266-N91, 276-887-M91, 1904-894-M91, 1904-894-M92
New Motorola Aftermarket USA Made IREF 12 Volt 90 Amp 5/8 Shaft || Meets or Exceeds OEM Specifications || One Year Warranty || 100% Computer Load Tested for Reliability || 10459541 A-9160, 109-12107, 90-05-9104 7471N-USA, 1336073C1, 132-266-N91, 276-887-M91, 1904-894-M91, 1904-894-M92
$146.96
23-04-2023
-: -
New USA! Made Alternator for Massey Ferguson Prairie Westward White Farm Equip 1979-1997 10-252, 8MR2033T 8MR2033TS 110-252 1336073C1 132-266-N91 276-887-M91 1904-894-M91 1904-894-M92 10459541 A-9160
New Motorola Aftermarket USA Made IREF 12 Volt 90 Amp 5/8 Shaft || Meets or Exceeds OEM Specifications || One Year Warranty || 100% Computer Load Tested for Reliability
New Motorola Aftermarket USA Made IREF 12 Volt 90 Amp 5/8 Shaft || Meets or Exceeds OEM Specifications || One Year Warranty || 100% Computer Load Tested for Reliability
Number on catalog scheme: -
Compatible models:
7075524
Mariner
Mariner entire parts catalog list:
Information:
Lubricate 1 fitting. Check all belts for cracks and wear. Replace belts in sets only to ensure even wear.(6)Cooling System
At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level ONLY when the engine is stopped and the filler cap is cool enough to touch with your hand.Remove the filler cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with skin and eyes to prevent personal injury.
1. Clean radiator fins. 2. Inspect condition of the radiator hoses. 3. Tighten hose clamps as necessary.(7)Engine Air Intake System
The engine may be equipped with a dry-type or an oil bath air cleaner. Service the air cleaner at regular intervals.
NEVER SERVICE AIR INTAKE SYSTEM WITH THE ENGINE RUNNING.
Dry-type Air Cleaner
1. Loosen and remove the retaining bolts and end cover.2. Remove and inspect the element. If the element is damaged, install a new element.3. Remove any dirt or debris which has accumulated on the bottom or sides of the filter housing. Clean the filter element using one of the methods covered in the topic, CLEANING AIR CLEANER ELEMENTS.4. Install the clean element in the filter housing.5. Install the cover. Tighten the retaining bolts.6. Inspect condition of hoses and pipes. Tighten hose clamps and joint connections.Oil Bath-type Air Cleaner (If Equipped)
1. Loosen the retaining clamp thumb screw and remove the oil pan from the air cleaner.2. Clean the bottom of the oil pan with clean nonflammable solvent. Fill the pan with clean engine oil to the level indicated by the mark on the side of the oil pan.3. Install the oil pan and tighten the retaining clamp.Cleaning Dry Air Cleaner Elements
When using pressure air, wear protective face shield and protective clothing. Use 30 psi (205 kPa) maximum pressure air for cleaning purposes.
Do not clean element by bumping or tapping. Do not use elements with damaged pleats, gaskets or seals.Do not clean elements with a combustible liquid.
Pressure Air - 30 psi (205 kPa) Maximum
1. Direct air inside the element along the length of the pleats. 2. Direct air outside the element along the length of the pleats. Direct air inside the element along the length of the pleats. Inspect the element.Water - 40 psi (280 kPa) Maximum
1. Direct water inside the element and along the length of the pleats. 2. Direct the water outside the element along the length of the pleats. Rinse, air dry thoroughly and inspect the element.Detergent
1. Wash the element in warm water and nonsudsing household detergent.2. Rinse with clean water.3. Air dry thoroughly and inspect element.Inspecting Element
1. Insert a light inside of the clean and dry element, and inspect it. Discard the element if rips or tears are found. 2. Wrap and store good elements in a clean, dry place.(8)Batteries
Batteries give off flammable fumes that can explode. Do not smoke when observing electrolyte level.Electrolyte is an acid and can cause personal injury if it contacts skin or eyes.Always wear protective glasses when working with batteries.
Clean the top of the batteries. Remove the filler caps and inspect the electrolyte level. Maintain the electrolyte level to the bottom of the filler openings. Install the filler caps. At proper charge rate, batteries will not require more than 1 ounce (30 cc) of water per cell per week.(9)Alternator And Fan Drive Belts
1. Inspect the condition and the adjustment of the alternator belts (A), and the fan drive belts (B).2. Replace the belts in sets if either belt is frayed or cracked.3. Apply 25 lb. (110 N) force midway between the pulleys. Deflection should be 1/2 inch (1 cm).To Adjust Fan Drive Belts:
1. Loosen the mounting bolts (A) and adjust with the adjusting bolt (B). 2. When properly adjusted, tighten the mounting bolts (A).To Adjust Alternator Belts:
1. Loosen the mounting bolt (A) and the locknut (B). 2. Adjust the alternator belts by either tightening or loosening the adjusting nut (C).3. When the alternator is properly adjusted, tighten the locknut (B) and the mounting bolt (A).(10)Engine Crankcase
Hot oil or components can cause personal injury if they contact skin. Use catuion when draining oil or changing filters.
At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level ONLY when the engine is stopped and the filler cap is cool enough to touch with your hand.Remove the filler cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with skin and eyes to prevent personal injury.
1. Clean radiator fins. 2. Inspect condition of the radiator hoses. 3. Tighten hose clamps as necessary.(7)Engine Air Intake System
The engine may be equipped with a dry-type or an oil bath air cleaner. Service the air cleaner at regular intervals.
NEVER SERVICE AIR INTAKE SYSTEM WITH THE ENGINE RUNNING.
Dry-type Air Cleaner
1. Loosen and remove the retaining bolts and end cover.2. Remove and inspect the element. If the element is damaged, install a new element.3. Remove any dirt or debris which has accumulated on the bottom or sides of the filter housing. Clean the filter element using one of the methods covered in the topic, CLEANING AIR CLEANER ELEMENTS.4. Install the clean element in the filter housing.5. Install the cover. Tighten the retaining bolts.6. Inspect condition of hoses and pipes. Tighten hose clamps and joint connections.Oil Bath-type Air Cleaner (If Equipped)
1. Loosen the retaining clamp thumb screw and remove the oil pan from the air cleaner.2. Clean the bottom of the oil pan with clean nonflammable solvent. Fill the pan with clean engine oil to the level indicated by the mark on the side of the oil pan.3. Install the oil pan and tighten the retaining clamp.Cleaning Dry Air Cleaner Elements
When using pressure air, wear protective face shield and protective clothing. Use 30 psi (205 kPa) maximum pressure air for cleaning purposes.
Do not clean element by bumping or tapping. Do not use elements with damaged pleats, gaskets or seals.Do not clean elements with a combustible liquid.
Pressure Air - 30 psi (205 kPa) Maximum
1. Direct air inside the element along the length of the pleats. 2. Direct air outside the element along the length of the pleats. Direct air inside the element along the length of the pleats. Inspect the element.Water - 40 psi (280 kPa) Maximum
1. Direct water inside the element and along the length of the pleats. 2. Direct the water outside the element along the length of the pleats. Rinse, air dry thoroughly and inspect the element.Detergent
1. Wash the element in warm water and nonsudsing household detergent.2. Rinse with clean water.3. Air dry thoroughly and inspect element.Inspecting Element
1. Insert a light inside of the clean and dry element, and inspect it. Discard the element if rips or tears are found. 2. Wrap and store good elements in a clean, dry place.(8)Batteries
Batteries give off flammable fumes that can explode. Do not smoke when observing electrolyte level.Electrolyte is an acid and can cause personal injury if it contacts skin or eyes.Always wear protective glasses when working with batteries.
Clean the top of the batteries. Remove the filler caps and inspect the electrolyte level. Maintain the electrolyte level to the bottom of the filler openings. Install the filler caps. At proper charge rate, batteries will not require more than 1 ounce (30 cc) of water per cell per week.(9)Alternator And Fan Drive Belts
1. Inspect the condition and the adjustment of the alternator belts (A), and the fan drive belts (B).2. Replace the belts in sets if either belt is frayed or cracked.3. Apply 25 lb. (110 N) force midway between the pulleys. Deflection should be 1/2 inch (1 cm).To Adjust Fan Drive Belts:
1. Loosen the mounting bolts (A) and adjust with the adjusting bolt (B). 2. When properly adjusted, tighten the mounting bolts (A).To Adjust Alternator Belts:
1. Loosen the mounting bolt (A) and the locknut (B). 2. Adjust the alternator belts by either tightening or loosening the adjusting nut (C).3. When the alternator is properly adjusted, tighten the locknut (B) and the mounting bolt (A).(10)Engine Crankcase
Hot oil or components can cause personal injury if they contact skin. Use catuion when draining oil or changing filters.
Parts owner Mariner:
11027 2