81878M Mariner PIN, MAGNETO CONTROL LEVER

Illustration 1 g00835403
520 Control Module (Generator Set) (1) Indicator for engine overspeed (2) Indicator for coolant temperature (3) Indicator for oil pressure (4) Indicator for alarm (5) Automatic start position (6) Programmable indicators (7) Manual start position (8) Engine control switch (ECS) (9) Indicator for engine overcrank (10) Indicator for emergency stop (11) Stop/Reset positionNote: The software disk that is supplied with the "P808 For Windows" interface contains a Microsoft Word document for the automatic generation of suitable label inserts for the Programmable indicators (6) .Standard Configuration
Miscellaneous Items
Start Attempts ... 3Generator Frequency Input Present ... YesNominal Frequency ... 50 HzGenerator Poles ... 4Engine Speed Sensor Input Present ... NoFlywheel Teeth ... 118Nominal RPM ... 1500Lamp Test EnabIed ... NoStart Button ... NoneStop Button ... NoneSafety On Delay Time Termination ... PrematureLoad Transfer Mode ... NormalPreheat Mode ... NormalTachometer Full Scale Current ... 0.5 mATachometer Full Scale RPM ... 2500Electrical Trip EnabIed ... NoConfigurable Inputs
Table 1
Input Channel     Polarity     Type     Activation Time    
Remote Start     Close to activate     -     -    
Oil pressure     Close to activate     Shutdown     Activate from safety on    
Coolant Temperature     Close to activate     Shutdown     Activate from safety on    
Programmable Input 1     Close to activate     Warning     Always active    
Programmable Input 2     Close to activate     Warning     Activate from safety on    
Programmable Input 3     Close to activate     Shutdown     Activate from safety on    
Programmable Input 4     Close to activate     Indication     Always active    Relay Outputs
Table 2
Output Channel     Polarity     Control Source    
Programmable Output 1     Energize     1 Preheat    
Programmable Output 2     Energize     18 Common Alarm    
Programmable Output 3     Energize     4 Load transfer    Front Panel Indicators
Table 3
Indicator     Polarity     Control Source    
1     Lit     29 Programmable IP 1 active    
2     Lit     30 Programmable IP 2 active    
3     Lit     31 Programmable IP 3 active    
4     Lit     32 Programmable IP 4 active    
5     Lit     25 Remote start present    
6     Lit     27 Oil Pressure alarm    
7     Lit     28 Coolant Temp alarm    
8     Lit     20 Engine Overspeed alarm    
9     Lit     7 Engine Overcrank alarm    
10     Lit     21 Emergency Stop alarm    
11     Lit     18 Common alarm    System Timers
Table 4
Timer     Mins:secs    
Remote start delay time     0:05    
Remote stop delay time     0:30    
Cranking time     0:10    
Crank reset time     0:10    
Safety on delay time     0:10    
Warm up time     0:05    
Cooling time     0:30    
Fail to stop time     0:30    
ETS hold time     0:00    
Preheat time     0:00    
Sensor fail delay time     0:02    
Smoke limiting time     0:00    
Smoke limiting ramp time     0:00    Analogue Levels
Overspeed on alternator frequency ... 57.0 HzOverspeed on engine speed sensor ... 1750 RPMOverspeed overshoot during safety on delay ... 0%Underspeed on alternator frequency ... 30.0 HzUnderspeed on engine speed sensor ... 1250 RPMCrank disconnect on alternator frequency ... 21.0 HzCrank disconnect on engine speed sensor ... 600 RPMCrank disconnect alternator voltage ... 30.0 VCharge fail voltage ... 8.0 V