802986 Mariner SCREW, Adjusting


802986 SCREW, Adjusting Mariner 7040203KL, 7040203UL SCREW
802986 SCREW, Adjusting Mariner
Rating:
43

Buy SCREW, Adjusting 802986 Mariner genuine, new aftermarket parts with delivery

You can buy parts:

As an associate, we earn commssions on qualifying purchases through the links below
$79.99
 

14-11-2023

-: -
Torque 2 Pack of Type 24 Service Brake Chamber Service 2.25" Stroke for semi Truck Trailer (Replaces Bendix 800825 802986 236667 288808 Tectran 150-240 150240 Mack 19QE486) (2 x TR24SC)
TYPE - Air Brake Chamber Service Type 24 T24 || REPLACEMENT - BENDIX 2800825 802986 236667 288808 // BWP M458 // EUCLID E-BC24S // MIDLAND-GRAU KN36240 // NEW STAR S-9815 // PAI HSC-0224-100 // TECTRAN 150-240 // WAGNER AC22380 AC22381 || SPECS - Actuator Type Size: 24 Stroke Type: Standard // Available Stroke: 2-1/4", 57mm // Length from mounting bracket to end of Spring Housing: 3-3/4", 97mm // Dimension at Service Clampband: 9-3/8", 239mm // Stud Spacing with 5/8-11 UNC studs: 4-3/4", 120.7mm // Pushrod Length from face of Service Housing: 10-1/4" // Pushrod threads: 5/8"-18 UNF // Service Clampband position: 0 degree Air Port position: 90 degree Weight: 8.6 lbs. , 3.9 kg. || FEATURES - Steel Pressure Housing; Powder coated with resistance welded air ports // World Class Diaphragm; High quality rubber compound, resistant to heat and cold // Sturdy Service Housing; Powder coated for corrosion resistance; Flat bottom with 10 gauge steel // Self-piloting Dust Shield || WARRANTY - 1-Year Unlimited Mile Warranty - includes assurances about the quality of the item, as well as a promise to provide replacement if something goes wrong within a set amount of time.
$44.98
 

19-04-2023

-: -
Torque Type 24 Service Brake Chamber Service 2.25" Stroke for semi Truck Trailer (Replaces Bendix 800825 802986 236667 288808 Tectran 150-240 150240 Mack 19QE486) (TR24SC)
&#9989 TYPE - Air Brake Chamber Service Type 24 T24 || &#9989 REPLACEMENT - BENDIX 2800825 802986 236667 288808 &#128312 BWP M458 &#128312 EUCLID E-BC24S &#128312 MIDLAND-GRAU KN36240 &#128312 NEW STAR S-9815 &#128312 PAI HSC-0224-100 &#128312 TECTRAN 150-240 &#128312 WAGNER AC22380 AC22381 || &#9989 SPECS - Actuator Type Size: 24 Stroke Type: Standard &#128312 Available Stroke: 2-1/4", 57mm &#128312 Length from mounting bracket to end of Spring Housing: 3-3/4", 97mm &#128312 Dimension at Service Clampband: 9-3/8", 239mm &#128312 Stud Spacing with 5/8-11 UNC studs: 4-3/4", 120.7mm &#128312 Pushrod Length from face of Service Housing: 10-1/4" &#128312 Pushrod threads: 5/8"-18 UNF &#128312 Service Clampband position: 0 degree Air Port position: 90 degree Weight: 8.6 lbs. , 3.9 kg. || &#9989 FEATURES - Steel Pressure Housing; Powder coated with resistance welded air ports &#128312 World Class Diaphragm; High quality rubber compound, resistant to heat and cold &#128312 Sturdy Service Housing; Powder coated for corrosion resistance; Flat bottom with 10 gauge steel &#128312 Self-piloting Dust Shield || &#9989 WARRANTY - 1-Year Unlimited Mile Warranty - includes assurances about the quality of the item, as well as a promise to provide replacement if something goes wrong within a set amount of time.
$56.71
 

14-11-2023

-: -
Lynol Type 24 Single Air Brake Service Chamber w/Clevis Sealed Replace KSC24 179.SC24 WA24SC 030019 EBC24S A2400S M458 24S 2400SC R870024 288808 85107400 802986 KN36240 S-9815 1036240 225926 5007120
✅ Chamber Type: Service Chamber | Type: Type 24 | Stroke: Standard | Welded Clevis: No | Stroke Length: 2.25” | Pushrod: 8.875" || ✅ Bill of Matericals: 1x Type 24 Single Air Brake Service Chamber || ✅ Replacement Part Number: KSC24 179.SC24 WA24SC 030019 E-BC24S A2400S 05-124 M-458 24S 2400SC 150-240 SC24 R870024 288808 85107400 802986 KN36240 S-9815 1-105 14-517 1036240 179.SC24 225926 5007120 2475297 53324 926024 A-22380 E-24S SC24 || ✅ Warranty - One year with Unlimited Miles. During the Warranty Period, We will replace, at no charge, products or parts of a product that proves defective because of improper material, under normal use and maintenance. || ✅ Meets Product Specific SAE Standards | Heavy-Duty Diaphragm is Highly Resistant to Abrasion
Number on catalog scheme: 11
 

Compatible models:

Mariner entire parts catalog list:

7040203KL 2001,2002,2003,2004,2006
7040203UL 2006

Information:


Table 1
J1939 Code and Description Comments
100-1
Engine Oil Pressure : Low - most severe (3) The engine is shut down.
The code is logged.
100-17
Engine Oil Pressure : Low - least severe (1) The code is logged.
100-18
Engine Oil Pressure : Low - moderate severity (2) The code is logged. If the engine shuts down due to a low oil pressure, power to the Electronic Control Module (ECM) must be cycled before restarting the engine.Probable Causes
Codes
Oil level
Oil aeration
Oil viscosity
Oil filter
Oil pump
Sensors
Bypass valve
Oil cooler
Suction tube
Worn engine componentsRecommended Actions
Table 2
Troubleshooting Test Steps Values Results
1. Check for Codes
A. Connect Caterpillar® Electronic Technician (Cat ET) to the service tool connector.
B. Look for active codes that are associated with the system for the event code.
Codes
Result: An associated code is active.
Repair: Troubleshoot any associated codes before continuing with this test.
Result: A code is active or logged.
Proceed to Test Step 2.
2. Check the Engine Oil Level
A. Refer to the Operation and Maintenance Manual, "Engine Oil Level - Check" for calibration of the dipstick gauge. The oil level can possibly be too far below the oil pump supply tube. The oil pump cannot supply enough lubrication to the engine components.
Oil Level
Result: The engine oil level is OK.
Proceed to Test Step 3.
Result: The engine oil level is low.
Repair: Add engine oil in order to obtain the correct engine oil level. Refer to Operation and Maintenance Manual, "Engine Oil" for the recommendations of engine oil.
Start the engine. Inspect the exterior of the engine for oil leaks.
If the problem is not resolved, proceed to Test Step 3.
3. Check the Engine Oil for Aeration
Note: Foamy oil on the dipstick is a good indication of aeration.
Aeration
Result: The oil is aerated.
Proceed to Test Step 10.
Result: The oil is not aerated.
Proceed to Test Step 4.
4. Ensure that the Engine Oil Viscosity is Correct
A. Obtain an S O S Oil Analysis to determine the characteristics of the oil.
Oil Viscosity
Result: The engine oil viscosity is correct.
Proceed to Test Step 5.
Result: The engine oil viscosity is not correct, or the oil is contaminated.
Repair: Replace the engine oil. Refer to Operation and Maintenance Manual, "Engine Oil" for the recommendations of engine oil.
Repair the cause of any engine oil contamination.
If the problem is not resolved, proceed to Test Step 5.
5. Replace the Oil Filter
Filter
Result: Replace the engine oil filter.
Repair: The oil filter was replaced.
If the problem is not resolved, proceed to Test Step 6.
6. Check the Oil Pump Pressure
A. Manually check the engine oil pressure. Refer to Testing and Adjusting, "Engine Oil Pressure - Test" for additional information.
Oil Pressure
Result: The oil pressure meets specifications.
Proceed to Test Step 7.
Result: The oil pressure does not meet specifications.
Repair: Repair or replace the oil pump.
If the problem is not resolved, proceed to Test Step 7.
7. Check the Engine Oil Pressure Sensor
A. Remove the oil pressure sensor.
B. Install a pipe "T" in the pressure sensor port.
C. Install a manual gauge on one side of the pipe "T". Install the oil pressure sensor on the other side of the pipe "T".
D. Start the engine and compare the two readings. The pressure reading must be within 13.8 kPa ( 2 psi).
Sensor
Result The pressure is within 13.8 kPa ( 2 psi).
Proceed to Test Step 8.
Result The pressure is not within 13.8 kPa ( 2 psi).
Repair: Replace the sensor.
If the problem is not resolved, proceed to Test Step 8.
8. Check the Oil Cooler for a Restriction
A. Check the inlet side of the oil cooler for debris or blockage.
Restriction
Result: There was not debris or restrictions in the oil cooler.
Proceed to Test Step 9.
Result: There was debris or restrictions in the oil cooler.
Repair: Clean or replace the oil cooler.
If the problem is not resolved, proceed to Test Step 9.
9. Check the Suction Tube
A. Remove the oil pan.
B. Inspect the suction tube. Check the joints of the tube for cracks or for a damaged O-ring seal at the connection to the pump.
C. Inspect the inlet screen of the suction tube for a restriction. This restriction will cause cavitation and a loss of engine oil pressure.
Suction Tube
Result: The suction tube and seal are OK.
Proceed to Test Step 10.
Result: The suction tube and seal are not OK.
Repair: Clear the obstruction. Repair or replace damaged suction tube components.
If the problem is not resolved, proceed to Test Step 10.
10. Check for Worn Engine Components
A. Check for excessive clearance for the following:
- Oil pump gears
- Camshaft bearings
- Crankshaft bearings
- Rocker arm to rocker arm shaft
Damaged or Worn Engine Components
Result: Excessive clearance was identified for an engine component.
Repair: Replace the worn engine components.
Verify that the repair eliminated the problem.
If the procedure did not correct the issue, contact your Cat dealer Technical Communicator (TC). For further assistance, your TC can confer with the Dealer Solutions Network (DSN).


Parts screw Mariner:

16122
 
16122 SCREW
7004201HB, 7004201UB, 7004211SK, 7030201KL, 7031203GD, 7031207LF, 7031312TB, 7040203KL, 7040203UL, 7041203GB, 7F042016B, 7F04201JB, 7F08201TB
16223 3
 
16223 3 SCREW
7004201HB, 7004201UB, 7015203KL, 7015203UL, 7040203KL, 7040203UL, 7F042016B, 7F04201JB
855558
 
855558 SCREW, (M5 x 16)
7040203KL, 7040203UL, 7F042016B, 7F04201JB
853989
SCREW
853989 SCREW
7030201KL, 7031207LF, 7040203KL, 7040203UL
855544 7
 
855544 7 SCREW
7030201KL, 7031207LF, 7040203KL, 7040203UL
855544 5
 
855544 5 SCREW
7040203KL, 7040203UL
16260 5
 
16260 5 SCREW
7040203KL
855544030
 
855544030 SCREW
7040203UL
Back to top