806965A 2 Mercruiser STARTER MOTOR ASSEMBLY

1. Remove 15 bolts (1) and washers from lower plate (2) and plate assembly (3). Remove plate (2) from the radiator shroud. Remove plate assembly (3) from the bottom inside of the radiator shroud. 2. Remove four bolts (4) and washers from air conditioner condenser (5).3. Use two people in order to remove the air conditioner condenser from the radiator assembly. The weight of air conditioner condenser (5) is 18 Kg (40 lb). Remove two bolts (6) and washers from the radiator. 4. Remove 14 bolts (8) and washers from upper plate (7). Remove upper plate (7), the plate and the baffle that are behind upper plate (7), from the radiator shroud.
Nut and washer removed for photo clarity5. Remove two nuts, washers and bolts (9) from two brackets (10). The bolts are removed through the front of the radiator. 6. Attach a lifting sling and a hoist to the hand rails of the radiator shroud. Lay the radiator shroud down on its front face. Use lifting slings and a hoist in order to remove radiator core (11) from the shroud. Attach the lifting slings in a manner that will balance the radiator core. The weight of radiator core (11) is 64 Kg (141 lb).Install Radiator Core & Air Conditioner Condenser
Check the condition of the radiator core and the air conditioner condenser prior to installation. Remove any dirt or debris that may restrict the flow of air through the radiator core or air conditioner condenser. If any of the cooling fins are bent, they should be straightened.1. Clean the air conditioner condenser and the radiator core. 2. Attach a lifting slings and a hoist to radiator core (11). Attach the lifting slings in a manner that will balance radiator core (11). Position radiator core (11) into the radiator shroud. Attach a lifting sling and a hoist to the hand rails of the radiator shroud. Carefully lift the radiator shroud and the radiator core to a standing position. 3. Install two nuts, washers and bolts (9) into two brackets (10) in order to mount the top of the radiator core to the shroud. The bolts are installed through the front of the radiator. Install two bolts (6) and washers into the radiator that secure the bottom of the radiator core to the shroud. 4. Position upper plate (7), the plate and the baffle that mounts behind upper plate (7) to the radiator shroud. Install 14 bolts (8) and washers to upper plate (7) that secure the upper plate and the plate behind the upper plate to the radiator shroud. 5. Position air conditioner condenser (5) to the radiator assembly. Install four bolts (4) that secure air conditioner condenser (5) to the radiator assembly. Install two bolts (6). 6. Position plate assembly (3) to the bottom inside of the radiator shroud. Position lower plate (2) to the radiator shroud. Install 15 bolts (1) into lower plate (2) that secure the lower plate to the radiator shroud and to plate assembly (3).End By:a. install radiator