806254 Mercruiser WASTEGATE


806254 WASTEGATE Mercruiser 473B1F0GS WASTEGATE
806254 WASTEGATE Mercruiser
Rating:
83

Buy WASTEGATE 806254 Mercruiser genuine, new aftermarket parts with delivery

You can buy parts:

As an associate, we earn commssions on qualifying purchases through the links below
$95.95

04-12-2024
5.9[2.66] pounds
US: Race-Driven Inc
Rear Shock fits Yamaha Grizzly 660 YFM660 2002-2008 x1 by Race-Driven
Race-Driven Brand New Race-Driven High Quality Gas Shock || Aftermarket shock engineered and built to the exact dimensions of OEM || Designed to meet or exceed original equipment quality standards for long lasting performance. || Fits: 2002 2003 2004 2005 2006 2007 2008 Yamaha Grizzly 660 YFM660
$169.95
 

31-05-2019

Aftermarke: Aftermarket Filtrati
Qty 1 AFE 806254 ASC Direct Replacement, Element, Refrigeration
Direct Replacement For ASC 806254 || ELEMENT, REFRIGERATION || Fit, Form and Function Guarantee
Number on catalog scheme: 8
 

Compatible models:

473B1F0GS   Mercruiser

Mercruiser entire parts catalog list:

Information:

1. Remove tachometer drive (2) from transfer pump cover (1). 2. Remove bolts (4). Make a separation of cover (1) from pump body (3).3. Remove the lip type seal (5) from the cover. 4. Remove plug (7), seal, spring (8) and plunger (bypass valve) (6) from the cover. 5. Remove idler gear (12) from the pump body.6. Remove nut (11), gear (9) and key (14) from shaft assembly (10).7. Remove O-ring seal (13) and shaft assembly (10) from the pump body. 8. Remove check valve (15).9. Remove bushing (16), two lip type seals and the bottom bearing from pump body (3).Assemble Fuel Transfer Pump
1. Install bearing (2) a distance of .03 .02 in. (0.76 0.51 mm) below the gear surface of pump body (3) with tooling (A).2. Install check valve (1). Move the metal (stake) in three locations (4) with even spaces in between to hold check valve (1) in place. 3. Install lip type seal (6) with tooling (A). Install seal (6) until it is .97 .02 in. (24.6 0.5 mm) from the bottom surface of body (3) and with the lip of the seal toward bearing (2) as shown. 4. Install lip type seal (5) with tooling (A). Install seal (5) until it is .56 .02 in. (14.2 0.5 mm) from the bottom surface of body (3) and with the lip of the seal away from bearing (2) as shown.5. Install bearing (7) even with the surface on the drive gear end of pump body (3) with tooling (A).6. Put a small amount of clean engine oil on O-ring seal (8) and install the seal on the pump body. 7. Put the seal guide, part of tool group (B), in position on shaft assembly (9) as shown. Put clean diesel fuel on the seal guide and on the lips of seals (5) and (6). Put shaft assembly (9) in position in the pump body.8. Install the key, gear (10) and nut (11) on shaft assembly (9). Tighten nut (11) to a torque of 22 5 lb.ft. (28 7 N m).9. Install idler gear (12) in pump body (3). 10. Put a small amount of Permatex No. 2 on the outside diameter of seal (13). Install lip type seal (13) with tooling (A). Install seal (13) until it is .75 .02 in. (19.1 0.5 mm) from the top surface of cover (14) with the lip toward the inside as shown. Put a small amount of clean diesel fuel on the lip of the seal. 11. Install bypass valve (15), spring (17), seal and plug (16) in cover (14). Tighten plug (16) to a torque of 27 3 lb.ft. (38 4 N m).
Do not get liquid gasket material into pump.
12. Put 7M7260 Liquid Gasket Material on the pump body surface that makes contact with cover (14). Install cover (14) on pump body (3). Shaft assembly must turn by hand after cover (14) is installed.13. Install tachometer drive (18) on cover (14).end by:a) install fuel transfer pump


Parts wastegate Mercruiser:

808016A 1
Back to top