813769 Mercury CLAMP

Illustration 1 g01139933
(1) Main display module
(2) Gauge cluster modules
(3) "SCROLL" switch
(4) "CLEAR MODE" switch
(5) "LH/RH SELECT" switch
(6) Emergency stop button
(7) "ALARM SILENCER" switch
(8) Engine control switchThe electronic instrument panel is the center for engine control and for information about engine operation. Each component of the instrument panel is described below.Main display module (1)
This module is the main component of the system. The module receives information from the switches, sensors, and other electronic controls on the engine via the CAT Data Link. The main module processes the information. The module then displays the information. The module also sends the information to the gauge cluster modules.Gauge cluster modules (2)
The gauge needles are controlled by information that is processed by the main display module.Display "SCROLL" switch (3)
The main display module has seven different modes of operation. The "SCROLL" switch is used to display the various parameters that are within each mode.Display "CLEAR/MODE" switch (4)
The "CLEAR/MODE" switch is used to move between the available modes of operation. Also, the "CLEAR/MODE" switch is used to clear the information that is displayed on the Main Display Module ."LH/RH SELECT" switch (5)
"The LH/RH" switch is used to display both the right-hand and left-hand parameter information on a single gauge. Right-hand values and left-hand values for the exhaust temperature can be displayed on control panels that are equipped with a second gauge module. Also, Right-hand values and left-hand values for the inlet air restriction can be displayed on control panels that are equipped with a second gauge module. When the gauge module is displaying the parameter information for the exhaust temperature or the inlet air restriction, the "LH/RH" switch can be toggled.Emergency Stop button (6)
This button is used to stop the engine quickly in an emergency situation. When this button is pressed, the fuel injection is disabled and the air shutoffs are activated."ALARM SILENCER" switch (7)
The "ALARM SILENCER" switch shuts off the audible portion of the alarm. This switch does not shut off the alarm.Engine control switch (8)
The engine control switch determines the status of the control panel. In the AUTO position (3 o'clock), the engine will start automatically whenever a remote start/stop initiate contact is closed. The engine will stop after the initiate contact opens and after an adjustable cooldown period has elapsed. A cooldown period can be programmed. This cooldown period (0 to 30 minutes) will allow the engine to dissipate heat before the engine shuts down.Type 2
Illustration 2 g01217074
(1) Marine Power Display (MPD)
(2) Pyrometer (if equipped)
(3) Engine control switch (ECS)
(4) Emergency stop switch
(5) Overspeed Indicator
(6) Alarm (horn)
(7) Starter select switch (if equipped)
(8) Emergency stop lampMarine Power Display (MPD) (1)
The Cat Marine Power Display is an attachment that is available from your Caterpillar dealer. The Cat Marine Power Display will supply the current engine data. The Cat Marine Power Display will supply the current data for the transmission. The screens can be customized. The screens can display various engine parameters. The parameters are described in the following text.Operating Information
There are three modes of display for the engine data: Analog, digital, and bar graph. The following parameters are displayed:
Engine speed
Percent load
Boost pressure
Coolant temperature
Transmission pressure
Engine hours
Battery voltageNote: The Oil Temperature and the Inlet Manifold Temperature will be displayed if the engine is equipped with the appropriate sensors.Display Modes
Illustration 3 g00744779
(1) Alarm acknowledgment
(2) Screen display
(3) Arrow keysDay Mode - The normal display is a white background with black letters and gauges. Press and hold down screen display (2) to display the slide bar that adjusts the contrast. Use arrow keys (3) to adjust the contrast.Night Mode - Press screen display (2) to change the display. The display will have a black background with red letters and gauges. Press and hold down screen display (2) again to display the slide bar that adjusts the brightness. Use arrow keys (3) to adjust the brightness. Press screen display (2) again to display the slide bar that adjusts the contrast while the Backlight is on. Use arrow keys (3) to adjust the contrast. Press screen display (2) to exit the bar that adjusts the contrast.Diagnostic Data
All diagnostic messages from the engine Electronic Control Module (ECM) are indicated by both a visual alarm and an audible alarm. Diagnostic indicators will not be shown when there are no active diagnostic codes. The diagnostic indicator will appear in the upper left corner of the screen. A window that describes the diagnostic code will appear in the center of the screen, and the audible alarm will sound. Press alarm acknowledgment (1) to silence the alarm. Press alarm acknowledgment (1) again to scroll through the diagnostic codes or remove the diagnostic codes. The diagnostic code indicator will remain on the screen until the fault is corrected.Note: The loss of signal to the display will result in a Diagnostic Code with the description “"NO DATA LINK SIGNAL"”.Configuration and Operation of the Marine Power display
The Caterpillar Marine Power Display can be programmed for three users with five screens for each user. Three users can set up the Cat Marine Power Display for the preferences of each user.The buttons have multiple functions which will depend on the screen that is displayed.Reference: See Operator Manual, LEBM0189, "Marine Power Display" for the functions of the buttons."System Information" Screen - When power is first applied, scroll through the screens until the "System Information" screen is shown. This screen allows the following parameters to be configured: "User Name", "Unit Location", "Display Units", and "Vessel Speed". A menu driven screen is located in the upper right corner of the Marine Power Display screen. Press alarm acknowledgment (1) to display the functions of the buttons. See Operator Manual, LEBM0189, "Marine Power Display" to configure the parameters.Gauge Screens - The gauge screens can be configured with three different sizes of three types of gauges. Each user can configure the screens to display the engine data according to individual preferences. Each user can configure the screens to display the engine data in the following formats: analog, digital, and bar graph.Note: Consult your Cat Dealer to customize the screens