78308A 1 Mercury RETAINER ASSEMBLY, BALL BEARING


78308A 1 RETAINER ASSEMBLY, BALL BEARING Mercury 1035204, 1035207, 1040200 RETAINER
78308A 1 RETAINER ASSEMBLY, BALL BEARING Mercury
Rating:
98

Buy RETAINER ASSEMBLY, BALL BEARING 78308A 1 Mercury genuine, new aftermarket parts with delivery
Number on catalog scheme: 2
 

Compatible models:

Mercury entire parts catalog list:

1035204 1984,1985,1986
1035207 1987,1988,1989
1040200 1980,1982,1983

Information:


Table 1
Required Tools
Tool Part Number Part Description Qty
A 473-2944 Capping Kit 1
At temperatures lower than −15° C (5° F), care should be taken when removing the Diesel Exhaust Fluid (DEF) line connectors that are attached to the tank, pump, and injector. To limit possible damage to the DEF line connectors, carefully apply heat to the area of the DEF line connectors.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Turn the battery disconnect switch to the OFF position.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure.
Illustration 1 g03419413
Remove diesel exhaust fluid line (1). Refer to Disassembly and Assembly, "Diesel Exhaust Fluid Lines - Remove and Install" for the correct procedure.
Use Tooling (A) to plug diesel exhaust fluid line (1) and cap the connection for the diesel exhaust fluid line.
Remove diesel exhaust fluid line (6). Refer to Disassembly and Assembly, "Diesel Exhaust Fluid Lines - Remove and Install" for the correct procedure.
Use Tooling (A) to plug diesel exhaust fluid line (6) and cap the connection for the diesel exhaust fluid line.
Remove the diesel exhaust fluid line from connection (11). Refer to Disassembly and Assembly, "Diesel Exhaust Fluid Lines - Remove and Install" for the correct procedure.
Use Tooling (A) to plug diesel exhaust fluid line (11) and cap the connection for the diesel exhaust fluid line.
Loosen hose clamp (2) for hose assembly (3).
Disconnect hose assembly (3) from manifold DEF heater. Disconnection (4) (not shown) from the diesel exhaust fluid pump.
Loosen hose clamp (7) and hose clamp (9). Disconnect hose assembly (8) from the manifold DEF heater and the diesel exhaust fluid pump.
Disconnect the hose assembly from connection (5). Refer to the Original Equipment Manufacture (OEM) for the correct procedure.
Use Tooling (A) to plug connection (5).
Remove solenoid valve (10). Refer to Disassembly and Assembly, "Solenoid Valve (DEF Heater Coolant) - Remove and Install" for the correct procedure.
Illustration 2 g03419414
Remove bolt (14) and remove bracket (13).
Disconnected harness assembly (17) from the diesel exhaust fluid pump .
Remove bolts (12), bolts (15), and bolts (17) from bracket (16).
Position bracket (18) away from the bracket for the diesel exhaust fluid pump.
Illustration 3 g03419415
Remove allen head bolts (19) from cap (20).
Remove cap (20) from manifold (23).
Remove O-ring seal (21) (not shown) and O-ring seal (22) (not shown).
Remove bolts (24) from manifold (23).
Remove manifold (23) from the diesel exhaust fluid pump.
Use Tooling (A) to cap the connection on the diesel exhaust fluid pump.
Illustration 4 g03419524
Remove bolts (25) from diesel exhaust fluid pump (26). Support the weight of the diesel exhaust fluid pump as the bolts are removed.
Remove diesel exhaust fluid pump (26) from bracket (27).
If necessary, remove filter (28) (not shown). Refer to Operation and Maintenance Manual, "Diesel Emission Fluid (DEF) Filter - Clean/Replace" for the correct procedure.Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
B - Delphi Lockheed Rubber Grease 1
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.


Parts retainer Mercury:

79470A 1
 
79470A 1 RETAINER ASSEMBLY
1003203, 1003209, 1005200, 1007209, 1020208, 1035204, 1035207, 1040100, 1040200, 1040208, 1045205, 1500206
23004
 
23004 RETAINER, CHECK VALVE
1035204, 1040200, 1040208, 1060504, 1070500, 1075524, 1080500, 1080508, 1090520, 1090524, 1090528, 1115100, 1115503, 1115520, 1115523, 1115525, 1115528, 1135100, 1135726, 1140520, 1140528, 1140629, 1150503, 1150538, 1150625, 1150628, 1175626, 1200628
61002
 
61002 RETAINER, STARTER SPRING
1035204, 1035207, 1040200, 1040208, 10402139D, 1045217, 1050200, 1402202, 1402205, 1500101, 1500205, 1500206
12044
 
12044 RETAINER - TOGGLE SWITCH
1005200, 1018204, 1035204, 1035207, 1045217, 1050200, 1070312BC, 1070717
94121
 
94121 RETAINER, STARTER ROPE
1035204, 1035207, 1040200
Back to top