824470 Mercury STUD, (M8 x 1.25)

Introduction
This Special Instruction will provide the information required to update the prelube wiring group on certain 785D Off-Highway Trucks. The procedure contains required parts, fabrication details, and installation instructions.ReferenceRefer to Special Instruction, REHS1841, "General Welding Procedures" for additional welding information.Safety
Shock/Electrocution Hazard – Do not operate this equipment or work on this equipment unless you have read and understand the instructions and warnings in the Service Manual. Failure to follow the instructions or heed the warnings will result in serious injury or death.
Before servicing/performing maintenance on the machine, electrical power must be physically disconnected; battery plugs must be disconnected from the batteries, or the trailing cable must be unplugged, and warning tags and padlocks shall be applied by a certified electrician. Certified electricians shall perform or direct any electrical work, including any energized testing, repair work in controllers, motors, or other approved compartments, and shall insure that all compartments are properly closed and inspected prior to re-energization. All applicable lock out and tag out procedures must be followed.
Personal injury or death can result from fumes, gases, and ultraviolet rays from the weld arc. Welding can cause fumes, burn skin, and produce ultraviolet rays. Keep your head out of the fumes. Use ventilation, exhaust at the arc, or both to keep fumes and gases from your breathing area. Wear eye, ear, and body protection before working. Protect yourself and others by reading and understanding this warning. Fumes and gases can be dangerous to your health. Ultraviolet rays from the weld arc can injure eyes and burn skin. Electric shock can cause death.Read and understand the instructions of the manufacturer and the safety practices of your employer. Do not touch live electrical parts. See "American National Standard Z49.1, Safety in Welding and Cutting" which is published by the American Welding Society.American Welding Society
8669 NW 36 Street #130
Miami, Florida 33166-6672
1-800-443-9353See "OSHA Safety and Health Standards, 29 CFR 1910" which is available from the U.S. Department of Labor.U.S. Department of Labor
Washington, D.C. 20210
See applicable requirements for your local area.
Required Parts
Table 1
Required Parts    
Item     Qty     Part Number     Description    
1     1     9D-6168     Boss    
2     1     446-9281     Bracket As    
3     2     3D-6650     Spacer    
4     1     322-3063     Plate    
5     2     133-6934     Spacer    
6     2     9M-3296     Taperlock Stud    
7     11     9X-6458     Hard Washer    
8     4     6V-8801     Nut    
9     1     4L-6454     Bolt    
10     1     267-2746     Cover As    
11     2     9X-8256     Washer    
12     2     5C-9553     Bolt    
13     1     326-8116     Fuse    
14     2     264-3617     Lockwasher    
15     1     449-5467     Cable As    
16     1     448-7504     Cable As    
17     2     7X-0608     Hard Washer    
18     2     5C-7261     Nut    
19     6     7K-1181     Cable Strap    
20     2     204-2281     Cable Strap    
21     3     091-9035     Spacer    
22     7     177-4562     Grommet    
23     7     8T-1890     Clip    
24     7     8T-1889     Clip    
25     2     7X-0289     Bolt    
26     3     5S-7379     Bolt    
27     1     238-4664     Stud    
28     3     5M-3062     Bolt    
29     1     199-7854     Spacer    
30     1     0T-0573     Bolt    
31     1     337