01517-06908 Suzuki Bolt

Table 1
J1939 Code and Description CDL Code and Description Comments
100-3
Engine Oil Pressure : Voltage Above Normal 100-3
Engine Oil Pressure Sensor : Voltage Above Normal The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.
The code is logged.
100-4
Engine Oil Pressure : Voltage Below Normal 100-4
Engine Oil Pressure Sensor : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
105-3
Engine Intake Manifold #1 Temperature : Voltage Above Normal 172-3
Intake Manifold Air Temperature Sensor : Voltage Above Normal The code is logged.
105-4
Engine Intake Manifold #1 Temperature : Voltage Below Normal 172-4
Intake Manifold Air Temperature Sensor : Voltage Below Normal The code is logged.
109-3
Engine Coolant Pressure : Voltage Above Normal 2302-3
Engine Coolant Pump Outlet Pressure Sensor : Voltage Above Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
109-4
Engine Coolant Pressure : Voltage Below Normal 2302-4
Engine Coolant Pump Outlet Pressure Sensor : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
157-3
Engine Injector Metering Rail #1 Pressure : Voltage Above Normal 1797-3
Fuel Rail Pressure Sensor : Voltage Above Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
157-4
Engine Injector Metering Rail #1 Pressure : Voltage Below Normal 1797-4
Fuel Rail Pressure Sensor : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
1176-3
Engine Turbocharger 1 Compressor Inlet Pressure : Voltage Above Normal 2738-3
Turbocharger #1 Compressor Inlet Pressure Sensor : Voltage Above Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
1176-4
Engine Turbocharger 1 Compressor Inlet Pressure : Voltage Below Normal 2738-4
Turbocharger #1 Compressor Inlet Pressure Sensor : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
1177-3
Engine Turbocharger 2 Compressor Inlet Pressure : Voltage Above Normal 2739-3
Turbocharger #2 Compressor Inlet Pressure Sensor : Voltage Above Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
1177-4
Engine Turbocharger 2 Compressor Inlet Pressure : Voltage Below Normal 2739-4
Turbocharger #2 Compressor Inlet Pressure Sensor : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
1203-3
Engine Auxiliary Coolant Pressure : Voltage Above Normal 2301-3
Aftercooler Coolant Pump Outlet Pressure Sensor : Voltage Above Normal The code is logged.
1203-4
Engine Auxiliary Coolant Pressure : Voltage Below Normal 2301-4
Aftercooler Coolant Pump Outlet Pressure Sensor : Voltage Below Normal The code is logged.
1208-3
Engine Pre-filter Oil Pressure : Voltage Above Normal 542-3
Engine Oil Pressure Sensor - Before Oil Filter : Voltage Above Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
1208-4
Engine Pre-filter Oil Pressure : Voltage Below Normal 542-4
Engine Oil Pressure Sensor - Before Oil Filter : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
1381-3
Engine Fuel Supply Pump Inlet Pressure : Voltage Above Normal 2247-3
Fuel Transfer Pump Intake Pressure Sensor : Voltage Above Normal The ECM detects the following conditions:
The signal voltage from the primary fuel filter outlet pressure sensor is less than 04.8 VDC.
If equipped, the warning light will come on. The ECM will log the diagnostic code.
1381-4
Engine Fuel Supply Pump Inlet Pressure : Voltage Below Normal 2247-4
Fuel Transfer Pump Intake Pressure Sensor : Voltage Below Normal The ECM detects the following conditions:
The signal voltage from the primary fuel filter outlet pressure sensor is less than 0.2 VDC.
If equipped, the warning light will come on. The ECM will log the diagnostic code.
1382–3
Engine Fuel Filter (suction side) Differential Pressure : Voltage Above Normal N/A The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
1382–4
Engine fuel Filter (suction side) Differential Pressure : Voltage Below Normal N/A The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
3563-3
Engine Intake Manifold #1 Absolute Pressure : Voltage Above Normal 1785-3
Intake Manifold Pressure Sensor : Voltage Above Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
3563-4
Engine Intake Manifold #1 Absolute Pressure : Voltage Below Normal 1785-4
Intake Manifold Pressure Sensor : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
4335-3
Aftertreatment #1 SCR Dosing Air Assist Absolute Pressure : Voltage Above Normal 3092-3
Aftertreatment #1 SCR Dosing Air Assist Pressure Sensor : Voltage Above Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
4335-4
Aftertreatment #1 SCR Dosing Air Assist Absolute Pressure : Voltage Below Normal 3092-4
Aftertreatment #1 SCR Dosing Air Assist Pressure Sensor : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
4360-3
Aftertreatment #1 SCR Catalyst Intake Gas Temperature : Voltage Above Normal 3105-3
Aftertreatment #1 SCR Catalyst Intake Gas Temperature Sensor : Voltage Above Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
4360-4
Aftertreatment #1 SCR Catalyst Intake Gas Temperature : Voltage Below Normal 3105-4
Aftertreatment #1 SCR Catalyst Intake Gas Temperature Sensor : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
4363-3
Aftertreatment #1 SCR Catalyst Outlet Gas Temperature : Voltage Above Normal 3107-3
Aftertreatment #1 SCR Catalyst Outlet Gas Temperature Sensor : Voltage Above Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
4363-4
Aftertreatment #1 SCR Catalyst Outlet Gas Temperature : Voltage Below Normal 3107-4
Aftertreatment #1 SCR Catalyst Outlet Gas Temperature Sensor : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
5578-3
Engine Fuel Delivery Absolute Pressure : Voltage Above Normal 289-3
Fuel Pressure Sensor - Before Fuel Filter : Voltage Above Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
5578-4
Engine Fuel Delivery Absolute Pressure : Voltage Below Normal 289-4
Fuel Pressure Sensor - Before Fuel Filter : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The