99011-99E07-03A Suzuki MANUAL, OWNER'S

Illustration 1 g00286672
Illustration 2 g00286673
When the electric starting motor is viewed from the drive end, the motor rotates in the following direction. ... ClockwiseNo load conditions at 25°C (77°F) Speed ... 7643 1683 rpm Current draw ... 67.5 7.5 amp Voltage ... 23 V (1) Tighten the nut on the battery terminal to the following torque. ... 30.5 3.5 N m (22 3 lb ft) (2) Tighten the nut on the ground terminal to the following torque. ... 30.5 3.5 N m (22 3 lb ft) (3) Tighten the nut on the ground terminal to the following torque. ... 2.25 0.25 N m (20 2 lb in) (4) Tighten the nut on the switch terminal to the following torque. ... 2.25 0.25 N m (20 2 lb in) (5) Tighten the nut on the motor terminal to the following torque. ... 30.5 3.5 N m (22 3 lb ft) (6) Tighten the nut on the motor frame terminal to the following torque. ... 8 3 N m (71 27 lb in) 9X-9511 Starting Motor Solenoid Assembly Current consumption at 25°C (77°F) Pull-in windings at 20V ... 56.5 4.5 Amp Hold-in windings at 20V ... 14.6 AmpType 2
Illustration 3 g00286676
Illustration 4 g00286677
When the electric starting motor is viewed from the drive end, the motor rotates in the following direction. ... ClockwiseNo load conditions at 25°C (77°F) Speed ... 5500 rpm minimum Current draw ... 140 Amp maximum Voltage ... 24 V (1) Tighten the nut on the ground terminal to the following torque. ... 30.5 3.5 N m (22 3 lb ft) (2) Tighten the nut on the battery terminal to the following torque. ... 30.5 3.5 N m (22 3 lb ft) (3) Tighten the nut on the ground terminal to the following torque. ... 2.25 0.25 N m (20 2 lb in) (4) Tighten the nut on the switch terminal to the following torque. ... 2.25 0.25 N m (20 2 lb in) (5) Tighten the nut on the motor terminal to the following torque. ... 30.5 3.5 N m (22 3 lb ft) (6) Tighten the nut on the motor frame terminal to the following torque. ... 30.5 3.5 N m (22 3 lb ft) 9X-0332 Solenoid Kit Current consumption at 25°C (77°F) Pull-in windings at 24V ... 51 Amp Hold-in windings at 24V ... 7 AmpType 3
Illustration 5 g00282453
Illustration 6 g00282454
When the electric starting motor is viewed from the pinion end, the motor rotates in the following direction. ... ClockwiseNo load conditions at 25 °C (77 °F) Minimum speed with no load ... 3300 rpm Maximum current with no load ... 80 amp Voltage ... 23.5 V (1) NutThree wires are the maximum that may fit between the nuts. Tighten the nut on the battery terminal to the following torque. ... 30.5 3.5 N m (22 3 lb ft) (2) Nut Tighten the nut to the following torque. ... 1.5 0.5 N m (13 4 lb in) (3) Nut Tighten the ground terminal to the following torque. ... 30.5 3.5 N m (22 3 lb ft) (4) NutThe terminal that is on the switch terminal must be insulated with heat shrink tubing. Tighten the nut on the switch terminal to the following torque. ... 2.25 0.25 N m (20 2 lb in) (5) Nut Tighten the nut on the motor terminal to the following torque. ... 30.5 3.5 N m (22 3 lb ft) (6) Nut Tighten the nut on the motor frame terminal to the following torque. ... 17.5 2.5 N m (13 2 lb ft) 3E-0135 Solenoid Current draw at 24 V and 25 °C (77 °F) Pull-in windings ... 103 Amp Hold-in windings ... 19 Amp maximum