18590-58M00 SENSOR, MAP Suzuki
DF15A, DF20A
SENSOR
Price: query
Rating:
You can buy parts:
As an associate, we earn commssions on qualifying purchases through the links below
New Manifold Absolute Pressure Sensor Replacement for Hyundai Genesis - 0261230198
DTS
DTS
$12.17
31-08-2021
0.0[0.00] Pounds
-: -
New Manifold Absolute Pressure Sensor Standard Product AS197 Fits Presion Suzuki Alto Swift Terios Daihatsu Hyundai Santa Fe Kia Azera Rio SU4981 0261230198 95507999 39300-38200 (3-Pin)
High quality Hyundai Santa Fe Kia Azera Manifold Absolute Pressure Sensor. || Interchange Part Number is AS197_SU4981, SU4981, 8942097202, 89420-97202, 5S2469, 0-261-230-198, 0261230198, 4711695, 95507999, 39300-38200, 110107T030112A, 220712, 09-04-292-A20, 0904292A20, 09-03-093-A22, 0903093A22, 1010182101, 82K0, AS197, 18590T69L00, 1859067LA0, 39300-38100, 18590-58M00, MAP-0198. || Heavy duty, high-quality replacement parts || Constructed from 100% New premium quality components and Tested for Reliability, Durability and Performance || 100% Hassle Free Satisfaction Warranty
High quality Hyundai Santa Fe Kia Azera Manifold Absolute Pressure Sensor. || Interchange Part Number is AS197_SU4981, SU4981, 8942097202, 89420-97202, 5S2469, 0-261-230-198, 0261230198, 4711695, 95507999, 39300-38200, 110107T030112A, 220712, 09-04-292-A20, 0904292A20, 09-03-093-A22, 0903093A22, 1010182101, 82K0, AS197, 18590T69L00, 1859067LA0, 39300-38100, 18590-58M00, MAP-0198. || Heavy duty, high-quality replacement parts || Constructed from 100% New premium quality components and Tested for Reliability, Durability and Performance || 100% Hassle Free Satisfaction Warranty
Number on catalog scheme: 14
Suzuki entire parts catalog list:
Information:
2. Remove bolts (1) and cover (2) from adapter assembly (3). Remove bolts (4) and use two 1/2"-13 NC forcing screws to remove adapter assembly (3) from the drive housing. 3. Remove bolts (6) to remove adapter assembly (5), the drive gear and shaft as a unit from the drive housing.Install Accessory Drive (Front)
1. Put clean engine oil on the two O-ring seals on adapter assembly (1).2. Install the drive gear, shaft and adapter assembly (1) in the drive housing. Make sure the drive gear teeth are in alignment with the teeth of the oil and water pump drive gear. Install the bolts that hold adapter assembly (1) in the drive housing. 3. Put clean engine oil on the two O-ring seals on adapter assembly (2). Put adapter assembly (2) in position in the drive housing and install the four bolts that hold it in position. Put the cover with a gasket in position on adapter assembly (2) and install the two bolts that hold the cover and gasket in position.4. If the engine is equipped with an alternator, put the alternator pulley in position on the drive shaft and install the bolts that hold it in position. end by:a) install alternator (if so equipped)b) install governor driveDisassemble Accessory Drive (Front)
start by:a) remove accessory drive (front) 1. Remove O-ring seals (2) and (3) from the adapter. 2. Remove seal (4) from adapter (1). Use a press and tool group (A) to remove bearing (5) from adapter (1). 3. Remove bolts (7) to remove gear (8) from shaft (6). 4. Remove bolts (9) and the retainer washer to remove shaft (6) from adapter (10). 5. Remove O-ring seals (12) and (13) from adapter (10).6. Use a press and tool group (A) to remove bearing (11) from adapter (10).Assemble Accessory Drive (Front)
1. Make an alignment of the oil hole in the bearing and the oil hole in adapter (1). Use a press and tool group (A) and install the bearing in adapter (1). Check the bore in the bearing after assembly. The bore in the bearing must be 75.000 0.055 mm (2.9528 .0022 in.). 2. Install the two O-ring seals in adapter (1).3. Put clean engine oil on the bearing and install shaft (3) in adapter (1). Install retainer washer (2) to hold the shaft and adapter together. 4. Put gear (4) in position on shaft (3) and install the bolts to hold them together. 5. Make an alignment of the oil hole in the bearing and the oil hole in adapter (5). Use a press and tool group (A) and install the bearing in adapter (5). Check the bore in the bearing after assembly. The bore in the bearing must be 75.000 0.055 mm (2.9528 .0022 in.).6. Use tool group (A) to install the seal in adapter (5). Make sure the lip of the seal is toward the bearing as shown. 7. Install O-ring seals (6) and (7) on adapter (5) and put clean engine oil on them.end by:a) install accessory drive (front)
1. Put clean engine oil on the two O-ring seals on adapter assembly (1).2. Install the drive gear, shaft and adapter assembly (1) in the drive housing. Make sure the drive gear teeth are in alignment with the teeth of the oil and water pump drive gear. Install the bolts that hold adapter assembly (1) in the drive housing. 3. Put clean engine oil on the two O-ring seals on adapter assembly (2). Put adapter assembly (2) in position in the drive housing and install the four bolts that hold it in position. Put the cover with a gasket in position on adapter assembly (2) and install the two bolts that hold the cover and gasket in position.4. If the engine is equipped with an alternator, put the alternator pulley in position on the drive shaft and install the bolts that hold it in position. end by:a) install alternator (if so equipped)b) install governor driveDisassemble Accessory Drive (Front)
start by:a) remove accessory drive (front) 1. Remove O-ring seals (2) and (3) from the adapter. 2. Remove seal (4) from adapter (1). Use a press and tool group (A) to remove bearing (5) from adapter (1). 3. Remove bolts (7) to remove gear (8) from shaft (6). 4. Remove bolts (9) and the retainer washer to remove shaft (6) from adapter (10). 5. Remove O-ring seals (12) and (13) from adapter (10).6. Use a press and tool group (A) to remove bearing (11) from adapter (10).Assemble Accessory Drive (Front)
1. Make an alignment of the oil hole in the bearing and the oil hole in adapter (1). Use a press and tool group (A) and install the bearing in adapter (1). Check the bore in the bearing after assembly. The bore in the bearing must be 75.000 0.055 mm (2.9528 .0022 in.). 2. Install the two O-ring seals in adapter (1).3. Put clean engine oil on the bearing and install shaft (3) in adapter (1). Install retainer washer (2) to hold the shaft and adapter together. 4. Put gear (4) in position on shaft (3) and install the bolts to hold them together. 5. Make an alignment of the oil hole in the bearing and the oil hole in adapter (5). Use a press and tool group (A) and install the bearing in adapter (5). Check the bore in the bearing after assembly. The bore in the bearing must be 75.000 0.055 mm (2.9528 .0022 in.).6. Use tool group (A) to install the seal in adapter (5). Make sure the lip of the seal is toward the bearing as shown. 7. Install O-ring seals (6) and (7) on adapter (5) and put clean engine oil on them.end by:a) install accessory drive (front)
Parts sensor Suzuki:
13650-52G00
13650-52G00 SENSOR, IAT
DF100, DF100, DF100, DF100A, DF115, DF115, DF115, DF115A, DF115TL, DF140, DF140, DF140, DF140A, DF140T, DF140T, DF140Z, DF140Z, DF140Z, DF140Z, DF150, DF150, DF150, DF150TX, DF150ZX, DF15A, DF175, DF175, DF175, DF175TX, DF175ZX, DF200, DF200, DF200,
33220-89L00
13640-32G00