20802124 Actuator, rear Volvo.Penta
TAD750VE; TAD760VE
Actuator
Price: query
You can buy parts:
As an associate, we earn commssions on qualifying purchases through the links below
$11.99
20-09-2023
-: -
UMIRIKO Car Trash Can Skull Hanging Car Garbage Bin Foldable, Leak-Proof, Waterproof S 20802124
SIZE: S: 8.66 x 8.66 x 5.9 INCH and M: 11 x 11 x 5.9 INCH || LEAK-PROOF AND WATERPROOF: This car trash can is made of Oxford cloth, which is waterproof. The interior is supported by a PE board, which makes the trash can more three-dimensional and stable, and can be placed on the floor of the car. || FOLDABLE AND HANGING: The trash can has an adjustable shoulder strap, which can be hung on the back of the seat. With a fixed snap, it can fix the garbage bag and prevent the garbage bag from being transferred into the trash can. It can be folded and stored when not in use. || MULTI-FUNCTIONAL: The waterproof and leak-proof car dumpster can store a variety of items, and can also store garbage bags. Keep the inside of your car neat and clean. || EASY WIPE AND REUSABLE: The inner layer is hot-pressed with PEVA material, Wipe or rinse to keep the trash can clean.
SIZE: S: 8.66 x 8.66 x 5.9 INCH and M: 11 x 11 x 5.9 INCH || LEAK-PROOF AND WATERPROOF: This car trash can is made of Oxford cloth, which is waterproof. The interior is supported by a PE board, which makes the trash can more three-dimensional and stable, and can be placed on the floor of the car. || FOLDABLE AND HANGING: The trash can has an adjustable shoulder strap, which can be hung on the back of the seat. With a fixed snap, it can fix the garbage bag and prevent the garbage bag from being transferred into the trash can. It can be folded and stored when not in use. || MULTI-FUNCTIONAL: The waterproof and leak-proof car dumpster can store a variety of items, and can also store garbage bags. Keep the inside of your car neat and clean. || EASY WIPE AND REUSABLE: The inner layer is hot-pressed with PEVA material, Wipe or rinse to keep the trash can clean.
$18.99
05-09-2023
-: -
UMIRIKO Gym Backpack Bag Skull Sport Swimming Equipment Sackpack 20802124
High-Quality Polyester Material: Lightweight, Durable, Wear-resistant || Wet and Dry Separation/Multiple Pockets: This sports backpack is divided into upper and lower layers, and the lower waterproof layer can store wet clothes or slippers. There are multiple water-resistant pockets on the top, and the front pocket can store toiletries. The dry pocket can store clean clothes, and the small waterproof pocket can store mobile phones, keys and other items. || Large Pocket: 15.4 x 11.8 x 7.09 inch can perfectly store clothes, snacks, shoes, towels, water bottles, balls or daily necessities, etc. || Design: Drawstring closure for quick storage and easy access. Sturdy drawstring shoulder strap for easy portability. || SUITABLE FOR VARIOUS OCCASIONS: This backpack is perfect for fitness, supermarket, shopping, hiking, running, cycling, walking, camping, climbing, fishing, traveling, horse riding, and more sports activities.
High-Quality Polyester Material: Lightweight, Durable, Wear-resistant || Wet and Dry Separation/Multiple Pockets: This sports backpack is divided into upper and lower layers, and the lower waterproof layer can store wet clothes or slippers. There are multiple water-resistant pockets on the top, and the front pocket can store toiletries. The dry pocket can store clean clothes, and the small waterproof pocket can store mobile phones, keys and other items. || Large Pocket: 15.4 x 11.8 x 7.09 inch can perfectly store clothes, snacks, shoes, towels, water bottles, balls or daily necessities, etc. || Design: Drawstring closure for quick storage and easy access. Sturdy drawstring shoulder strap for easy portability. || SUITABLE FOR VARIOUS OCCASIONS: This backpack is perfect for fitness, supermarket, shopping, hiking, running, cycling, walking, camping, climbing, fishing, traveling, horse riding, and more sports activities.
$10.99
28-03-2023
-: -
UMIRIKO Tire Covers Waterproof Skull Spare Wheel Tire Covers 24'' for RV Trailer SUV Truck Camper Travel Trailer Accessories 20802124
[Four Sizes]: S: Diameter 24.41in Suitable for diameters 23-25.5 inches. M: Diameter 26.38in is suitable for 25.5-27.5 inches. L: Diameter 28.35in is suitable for 27.5-29.5 inches. XL: Diameter 30.71in is suitable for 29.5-31.4 inches. The width of each size wheel well is 9.8 inches. || [High-quality Material]: Made of silver-coated Oxford fabric, which has sun protection function, reduces the damage caused by the sun and protects the tires. || [Waterproof and Dustproof]: The fabric is waterproof, reducing the damage caused by dogs peeing on the tires, rain or other substances, and avoiding the shortening of the service life of the tires. A spare tire placed in the yard, using this tire cover can prevent leaves, mud, etc. from getting stuck in the wheel. || [Easy to install]: With elastic band and hook design, better wrapping, easy to install, and increase the stability of use. || [WIDE APPLICATIONS]: Perfectly compatible with tires for trailers, RVs, SUVs, trucks and many other models.
[Four Sizes]: S: Diameter 24.41in Suitable for diameters 23-25.5 inches. M: Diameter 26.38in is suitable for 25.5-27.5 inches. L: Diameter 28.35in is suitable for 27.5-29.5 inches. XL: Diameter 30.71in is suitable for 29.5-31.4 inches. The width of each size wheel well is 9.8 inches. || [High-quality Material]: Made of silver-coated Oxford fabric, which has sun protection function, reduces the damage caused by the sun and protects the tires. || [Waterproof and Dustproof]: The fabric is waterproof, reducing the damage caused by dogs peeing on the tires, rain or other substances, and avoiding the shortening of the service life of the tires. A spare tire placed in the yard, using this tire cover can prevent leaves, mud, etc. from getting stuck in the wheel. || [Easy to install]: With elastic band and hook design, better wrapping, easy to install, and increase the stability of use. || [WIDE APPLICATIONS]: Perfectly compatible with tires for trailers, RVs, SUVs, trucks and many other models.
Number on catalog scheme: 38
Compatible models:
TAD750VE; TAD760VE
Volvo.Penta
Volvo Penta entire parts catalog list:
Information:
start by: a) separation of governor from fuel injection pump housing 1. Remove the cover (1) for the rack centering pin. Move the rack until the centering pin can be pushed down. Install the cover so the edge of the cover holds the pin down.2. Remove the protection cap and felt washer (2).3. Install wrench (A) and remove bushing (3). 4. Remove seal (4).5. Install extractor (B). Hold the rack toward the driven end of the pump housing and remove the fuel injection pump.
Do not remove fuel injection pumps without the rack centering pin installed and the rack held toward the driven end of the pump housing.
6. Remove spacer (10). Put identification on spacers (10), fuel injection pumps, and lifters (14) as to their respective location in the pump housing. These parts must be installed back in their original positions in the pump housing.7. Disassemble injection pumps using the following method: a) Remove bonnet (5), ring (8), spring (7), and check valve (6) from barrel (9).b) Remove plunger assembly (11), washer (12), and spring (13) from barrel (9).
During disassembly and assembly of fuel injection pumps, use much care to prevent damage to the surfaces of plunger assemblies. The barrel and plunger assemblies have a special fit with each other, and are not to be used with other barrels or plunger assemblies.
8. Remove the cover for the rack centering pin. Remove the spring and pin.9. Remove the rack from the pump housing. 10. Remove lifters (14). Put identification on lifters so they can be installed back into their original positions in housing. 11. Remove the bolt, lock and plate (17).12. Remove spring (15) and gear assembly (18) from the camshaft. 13. Remove the camshaft (19) from the pump housing. 14. Install tool group (C) and remove the camshaft bearings from the pump housing.15. Remove the two rack bearings (16) from the pump housing.Assemble Fuel Injection Pump Housing
1. Install camshaft bearings in pump housing with tool group (C). Install the bearing at governor end of pump housing so the oil hole in bearing is in alignment with oil hole in pump housing. Install the two bearings on each end of housing so the edge of bearing will be even with end of pump housing. 2. Install the rack bearing in the governor end of the pump housing with tooling (D). Make sure the face of the bearing is .195 .005 in. (4.95 0.13 mm) inside the face of the pump housing. 3. Install the rack bearing at the opposite end of the pump housing with tool group (F).4. Put clean engine oil on the camshaft. Install it in the pump housing. 5. Put the governor drive gear (1) and spring (2) in position on the camshaft. Install the camshaft plate (3), bolt, and lock. 6. Install the lifters in their respective positions in pump housing. Put clean oil all over the rack (4) and install it in the pump housing. The (slot) groove in rack must be toward the governor end of pump housing.7. Install the spring, rack centering pin, and cover. Push the pin down and put the edge of the cover over the end of pin to hold the pin down.8. Install the spacers in their respective positions in housing. If new lifters and pumps are to be installed, an adjustment must be made to the fuel pump timing dimension. See MAKING A CHANGE TO THE TIMING DIMENSION FOR THE FUEL INJECTION PUMP: OFF ENGINE in TESTING AND ADJUSTING SECTION. 9. Install the dial indicator, from tool group (E) on the pump housing as shown. Hold rack toward driven end of pump housing, and move dial indicator to the "ZERO" position.10. Assemble the injection pumps as follows: a) Put clean fuel oil on all parts of the fuel injection pumps. b) Install the spring (7), washer (5), and plunger assembly (6) into the barrel (8).c) Install the spring (12), check valve (9), bonnet (11), and ring (10) on the barrel.
Do not install fuel injection pumps in pump housing until rack has been moved to center position. Rack is in center position when centering pin is held down and rack held toward the driven end of pump housing.
11. With the rack in center position, install the fuel injection pumps as follows: a) Turn camshaft until lobe of camshaft is down for pump being installed.b) Install tool (B) on the pump. c) Look down pump and put notches (13) in bonnet and barrel in alignment with (slot) groove (14) in pump gear. The slot (14) will be in alignment with center of the notches (13). Put pump in pump housing with notches (13) in alignment with guide pins in bore of the pump housing. Install pump in its respective position in the pump housing. d) Install the seal and bushing (15). Push down on tool (B), and tighten the bushing by hand (finger tight only) until the bushing is even with top surface of housing. If bushing can not be installed this far by hand, remove it. Remove pump. Put parts in alignment and install pump again.
Do not tighten bushing even with face of housing by using a wrench. If pump has been installed correctly, the bushing can be tightened with the fingers until it is even with the face of the pump housing.
e) Install tool
Do not remove fuel injection pumps without the rack centering pin installed and the rack held toward the driven end of the pump housing.
6. Remove spacer (10). Put identification on spacers (10), fuel injection pumps, and lifters (14) as to their respective location in the pump housing. These parts must be installed back in their original positions in the pump housing.7. Disassemble injection pumps using the following method: a) Remove bonnet (5), ring (8), spring (7), and check valve (6) from barrel (9).b) Remove plunger assembly (11), washer (12), and spring (13) from barrel (9).
During disassembly and assembly of fuel injection pumps, use much care to prevent damage to the surfaces of plunger assemblies. The barrel and plunger assemblies have a special fit with each other, and are not to be used with other barrels or plunger assemblies.
8. Remove the cover for the rack centering pin. Remove the spring and pin.9. Remove the rack from the pump housing. 10. Remove lifters (14). Put identification on lifters so they can be installed back into their original positions in housing. 11. Remove the bolt, lock and plate (17).12. Remove spring (15) and gear assembly (18) from the camshaft. 13. Remove the camshaft (19) from the pump housing. 14. Install tool group (C) and remove the camshaft bearings from the pump housing.15. Remove the two rack bearings (16) from the pump housing.Assemble Fuel Injection Pump Housing
1. Install camshaft bearings in pump housing with tool group (C). Install the bearing at governor end of pump housing so the oil hole in bearing is in alignment with oil hole in pump housing. Install the two bearings on each end of housing so the edge of bearing will be even with end of pump housing. 2. Install the rack bearing in the governor end of the pump housing with tooling (D). Make sure the face of the bearing is .195 .005 in. (4.95 0.13 mm) inside the face of the pump housing. 3. Install the rack bearing at the opposite end of the pump housing with tool group (F).4. Put clean engine oil on the camshaft. Install it in the pump housing. 5. Put the governor drive gear (1) and spring (2) in position on the camshaft. Install the camshaft plate (3), bolt, and lock. 6. Install the lifters in their respective positions in pump housing. Put clean oil all over the rack (4) and install it in the pump housing. The (slot) groove in rack must be toward the governor end of pump housing.7. Install the spring, rack centering pin, and cover. Push the pin down and put the edge of the cover over the end of pin to hold the pin down.8. Install the spacers in their respective positions in housing. If new lifters and pumps are to be installed, an adjustment must be made to the fuel pump timing dimension. See MAKING A CHANGE TO THE TIMING DIMENSION FOR THE FUEL INJECTION PUMP: OFF ENGINE in TESTING AND ADJUSTING SECTION. 9. Install the dial indicator, from tool group (E) on the pump housing as shown. Hold rack toward driven end of pump housing, and move dial indicator to the "ZERO" position.10. Assemble the injection pumps as follows: a) Put clean fuel oil on all parts of the fuel injection pumps. b) Install the spring (7), washer (5), and plunger assembly (6) into the barrel (8).c) Install the spring (12), check valve (9), bonnet (11), and ring (10) on the barrel.
Do not install fuel injection pumps in pump housing until rack has been moved to center position. Rack is in center position when centering pin is held down and rack held toward the driven end of pump housing.
11. With the rack in center position, install the fuel injection pumps as follows: a) Turn camshaft until lobe of camshaft is down for pump being installed.b) Install tool (B) on the pump. c) Look down pump and put notches (13) in bonnet and barrel in alignment with (slot) groove (14) in pump gear. The slot (14) will be in alignment with center of the notches (13). Put pump in pump housing with notches (13) in alignment with guide pins in bore of the pump housing. Install pump in its respective position in the pump housing. d) Install the seal and bushing (15). Push down on tool (B), and tighten the bushing by hand (finger tight only) until the bushing is even with top surface of housing. If bushing can not be installed this far by hand, remove it. Remove pump. Put parts in alignment and install pump again.
Do not tighten bushing even with face of housing by using a wrench. If pump has been installed correctly, the bushing can be tightened with the fingers until it is even with the face of the pump housing.
e) Install tool
Parts actuator Volvo Penta:
20802121