3852838 Adapter, remote oil filter Volvo.Penta
5.0FIPHUBCE; 5.0FIPHUCCE; 5.0FIPHUECE, 5.0FiPMDA; 5.0FiPMDM; 5.8FiPMDA, 5.0FIPNCACE; 5.0FIPNCBCE; 5.0FIPNCMCE, 5.0FLPMDA; 5.8FLPMDA, 5.0GLPBYC; 5.0GiPBYCCE; 5.7GSPBYC, 5.0GLPWTR; 5.0GiPWTR; 5.7GSIPWTR, 5.7GiPHUS, 5.7GLPLKA; 5.7GLPLKD; 5.7GLPLKE, 5.7G
Adapter
Price: query
Rating:
You can buy parts:
As an associate, we earn commssions on qualifying purchases through the links below
$9.45
27-09-2021
1.70196866264[0.45] Pound
-: -
Mabor Folding Cushion Portable Park Picnic Mat XPE Cushion, 3852838(h) mm Moisture Proof Picnic Mat, Light Weight and Skin-Friendly, Suitable for Camping and Hiking
????[Outdoor Beach Blanket] Beach with a size of 385×283×8(h)mm. The design of this cushion is light and handy, the volume after folding is only 140X90X60(h)mm, and the weight is only 30g (smaller ones will be smaller and lighter). So it can be quickly and conveniently put into our storage bag, this process is simple and convenient. You can easily take it anywhere! || ????[Excellent material] XPE material is environmentally friendly and pollution-free, close to human skin. When you sit on it, you won't feel any discomfort. And the product has the functions of moisture proof, heat insulation and cold preservation, good elasticity and good toughness. || ????[Moisture-proof] When you sit on the ground, you will inevitably receive moisture from the ground invade your body. These gases that are invisible to the naked eye will slowly accumulate in your body. If they accumulate for a long time, they will cause discomfort to your body. || ????【Excellent quality】Multiple stitching to achieve maximum strength and durability. All parts of this blanket are considered for long-term use. || ????【Multifunctional】Use as a picnic blanket to relax, hike, camp or just hang out in the garden with friends or family during the holidays. Really versatile camping accessories!
????[Outdoor Beach Blanket] Beach with a size of 385×283×8(h)mm. The design of this cushion is light and handy, the volume after folding is only 140X90X60(h)mm, and the weight is only 30g (smaller ones will be smaller and lighter). So it can be quickly and conveniently put into our storage bag, this process is simple and convenient. You can easily take it anywhere! || ????[Excellent material] XPE material is environmentally friendly and pollution-free, close to human skin. When you sit on it, you won't feel any discomfort. And the product has the functions of moisture proof, heat insulation and cold preservation, good elasticity and good toughness. || ????[Moisture-proof] When you sit on the ground, you will inevitably receive moisture from the ground invade your body. These gases that are invisible to the naked eye will slowly accumulate in your body. If they accumulate for a long time, they will cause discomfort to your body. || ????【Excellent quality】Multiple stitching to achieve maximum strength and durability. All parts of this blanket are considered for long-term use. || ????【Multifunctional】Use as a picnic blanket to relax, hike, camp or just hang out in the garden with friends or family during the holidays. Really versatile camping accessories!
Number on catalog scheme: 7
Compatible models:
5.0FIPHUBCE; 5.0FIPHUCCE; 5.0FIPHUECE
5.0FiPMDA; 5.0FiPMDM; 5.8FiPMDA
5.0FIPNCACE; 5.0FIPNCBCE; 5.0FIPNCMCE
5.0FLPMDA; 5.8FLPMDA
5.0GLPBYC; 5.0GiPBYCCE; 5.7GSPBYC
5.0GLPWTR; 5.0GiPWTR; 5.7GSIPWTR
5.7GiPHUS
5.7GLPLKA; 5.7GLPLKD; 5.7GLPLKE
5.7GLPMDA; 5.7GIPMDA; 5.7GIPMDACE
5.7GLPNCS; 5.7GIPNCACE; 5.7GIPNCSCE
5.8FIPNCACE; 5.8FIPNCBCE; 5.8FIPNCMCE
Volvo.Penta
Volvo Penta entire parts catalog list:
- Remote Oil Filter » 3852838
5.0FIPNCACE; 5.0FIPNCBCE; 5.0FIPNCMCE; 5.0FIPNCSCE; 5.0FLPNCA; 5.0FLPNCB; 5.0FLPNCM; 5.0FLPNCS
5.0FLPMDA; 5.8FLPMDA
5.0GLPBYC; 5.0GiPBYCCE; 5.7GSPBYC; 5.7GSIPBYCCE
5.0GLPWTR; 5.0GiPWTR; 5.7GSIPWTR; 5.7GSPWTR; 5.7GSiPWTRCE
5.7GiPHUS
5.7GLPLKA; 5.7GLPLKD; 5.7GLPLKE; 5.7GLPLKR; 5.7GSPLKD; 5.7GSPLKE; 5.7GLIPLKDCE; 5.7GIPLKDCE; 5.7GIPLKECE; 5.7GSICPLKD; 5.7GSiPLKD; 5.7GSIPL
5.7GLPMDA; 5.7GIPMDA; 5.7GIPMDACE; 5.7GLIMDA; 5.7GIIMDA
5.7GLPNCS; 5.7GIPNCACE; 5.7GIPNCSCE; 5.7GIPNCMCE; 5.7GIPNCBCE; 5.7GIINCCCE; 5.8FSIINCS
5.8FIPNCACE; 5.8FIPNCBCE; 5.8FIPNCMCE; 5.8FIPNCSCE; 5.8FLINCC; 5.8FLINCS; 5.8FLPNCA; 5.8FLPNCB; 5.8FLPNCM; 5.8FLPNCS; 5.8FSIINCC; 5.8FSIINC
Information:
Illustration 1 g01325918
Schematic for sensor supplyTest Step 1. Inspect the Electrical Connectors and the Wiring
Turn the keyswitch to the OFF position.
Illustration 2 g01181787
Left side engine view (typical example) (1) Injection actuation pressure sensor (2) Boost pressure sensor (3) Fuel pressure sensor (4) Engine oil pressure sensor (5) J2/P2 ECM connector
Thoroughly inspect the connectors for pressure sensors (1), (2), (3), and (4). Also, thoroughly inspect connector (5). Refer to Troubleshooting, "Electrical Connectors - Inspect".
Illustration 3 g01325967
P1 ECM connector (P1-2) +5 V sensor supply (P1-3) Sensor return (P1-32) Engine cooling fan speed sensor
Illustration 4 g01181788
P2 ECM connector (P2-2) +5 V sensor supply (P2-3) Sensor return (P2-16) Fuel pressure (P2-24) Engine oil pressure (P2-27) Injection actuation pressure (P2-40) Boost pressure (P2-41) +5 V sensor supply (P2-42) Sensor return
Illustration 5 g01159881
Sensor connector (A) +5 V supply (B) Sensor return (C) Signal
Perform a 45 N (10 lb) pull test on each of the wires in the ECM connectors that are associated with the circuit.
Check the allen head screw for each ECM connector for the proper torque. Refer to Troubleshooting, "Electrical Connectors - Inspect" for the correct torque values.
Check the harness and wiring for abrasion and for pinch points from the pressure sensors back to the ECM.Expected Result:All connectors, pins and sockets are completely coupled and/or inserted and the harness and wiring are free of corrosion, of abrasion and of pinch points.Results:
OK - The harness and connectors appear to be OK. Proceed to Test Step 2.
Not OK - There is a problem with the connectors and/or wiring.Repair: Repair the connectors or wiring and/or replace the connectors or wiring. Ensure that all of the seals are properly in place and ensure that the connectors are completely coupled.Verify that the repair eliminates the problem.STOPTest Step 2. Check for Active Diagnostic Codes
Connect Caterpillar Electronic Technician (ET) to the service tool connector. Refer to Troubleshooting, "Electronic Service Tools".
Turn the keyswitch to the ON position.
Observe the "Active Diagnostic" screen on Cat ET. Wait at least 30 seconds so that any codes may become active. Look for these codes:
262-03
262-04
Determine if the problem is related to a -03 diagnostic code or to a -04 diagnostic code.Expected Result:No diagnostic codes are active.Results:
OK - No diagnostic codes are active.Repair: If any of the above codes are logged and the engine is not running properly, refer to Troubleshooting, "Troubleshooting Without a Diagnostic Code".If the engine is running properly at this time, there may be an intermittent problem in a harness that is causing the codes to be logged. Refer to Troubleshooting, "Electrical Connectors - Inspect".STOP
Active -03 code - A -03 diagnostic code is active. Proceed to Test Step 3.
Active -04 code - A -04 diagnostic code is active. Proceed to Test Step 4.Test Step 3. Check the Supply Voltage at the Sensor Connector
Turn the keyswitch to the OFF position.
Disconnect the harness connectors for the following sensors:
Boost pressure sensor
Injection actuation pressure sensor
Fuel pressure sensor
Engine oil pressure sensor
Engine cooling fan speed sensor
Turn the keyswitch to the ON position.Note: Be sure to wiggle the harness during the following measurements in order to reveal an intermittent condition.
Measure the voltage between terminals A and B at each pressure sensor connector on the engine harness. Measure the voltage between terminals 2 and 5 at the connector for the engine cooling fan speed sensor.
Turn the keyswitch to the OFF position.
Connect all of the sensors.Expected Result:Each voltage measurement is 5.0 0.2 VDC.Results:
OK - Each voltage measurement is 5.0 0.2 VDC.Repair: Replace all wires to the original configuration. Clear all diagnostic codes. Check for active diagnostic codes. If the problem is intermittent, refer to the diagnostic functional test Troubleshooting, "Electrical Connectors - Inspect".STOP
Not OK - At least one voltage measurement is not 5.0 0.2 VDC. There is a problem with the wiring or with the ECM. Proceed to Test Step 5.Test Step 4. Disconnect the +5 V Sensors and Check for Active Diagnostic Codes
Monitor the active diagnostic code screen on Cat ET. Check and record any active diagnostic codes.Note: Wait at least 30 seconds in order for the diagnostic codes to become active.
Disconnect the following sensors one at a time at the sensor connector:
Boost pressure sensor
Injection actuation pressure sensor
Fuel pressure sensor
Engine oil pressure sensor
Engine cooling fan speed sensorExpected Result:The 262-04 diagnostic code deactivates when a particular sensor is disconnected.Results:
OK - The 262-04 diagnostic code deactivates when a particular sensor is disconnected.Repair: Connect the suspect sensor. If the code returns, replace the sensor.Connect all of the connectors. Verify that the problem is resolved.STOP
Not OK - The 262-04 diagnostic code remains after all of the sensors are disconnected. Leave the sensors disconnected. Proceed to Test Step 5.Test Step 5. Check the +5 V Supply at the ECM
Disconnect the J1/P1 ECM connector.
Remove terminal P1-2 (+5 V supply) from the P1 connector. Install a wire jumper with socket terminals on both ends into the P1-2 location.
Connect the J1/P1 ECM connectors.
Disconnect the J2/P2 ECM connector.
Remove terminal P2-2 (+5 V supply) from the P2 connector. Install a wire
Parts adapter Volvo Penta:
3855776
3855776 Adapter
3.0GLM-C; 3.0GLP-C, 3.0GLP-A; 3.0GLP-B; 3.0GLM-A, 3.0GLP-D, 3.0GLP-E, 3.0GLP-J; 3.0GLP-N, 4.3GL-A; 4.3GL-B; 4.3GL-C, 4.3GL-E; 4.3GL-EF, 4.3GL-G; 4.3GL-GF, 4.3GL-J; 4.3GL-JF, 4.3GL-P, 4.3GLPBYC; 4.3GSPBYC; 4.3GIPBYCCE, 4.3GLPEFS; 4.3GiPEFS, 4.3GLPLKD;
3857058
3857058 Adapter kit
3.0GSMBYMCE; 3.0GSPBYCCE, 3.0GSMLKD; 3.0GSPLKD, 4.3GLPBYC; 4.3GSPBYC; 4.3GIPBYCCE, 4.3GLPEFS; 4.3GiPEFS, 4.3GLPLKD; 4.3GLPLKE; 4.3GSPLKD, 4.3GLPWTC; 4.3GLPWTR; 4.3GSPWTC, 5.0GLPBYC; 5.0GiPBYCCE; 5.7GSPBYC, 5.0GLPEFS; 5.0GiPEFS; 5.7GSPEFS, 5.0GLPWTR;
3857065
3857065 Adapter kit
3.0GSMBYMCE; 3.0GSPBYCCE, 3.0GSMLKD; 3.0GSPLKD, 3.0GSMWTR; 3.0GSMWTS; 3.0GSPWTR, 3.0GSPBYCCE; 3.0GSPEFS; 3.0GSMEFS, 4.3GLPBYC; 4.3GSPBYC; 4.3GIPBYCCE, 4.3GLPEFS; 4.3GiPEFS, 4.3GLPLKD; 4.3GLPLKE; 4.3GSPLKD, 4.3GLPWTC; 4.3GLPWTR; 4.3GSPWTC, 5.0GLPBYC;
3857066
3857066 Adapter kit
3.0GSMBYMCE; 3.0GSPBYCCE, 3.0GSMLKD; 3.0GSPLKD, 3.0GSMWTR; 3.0GSMWTS; 3.0GSPWTR, 3.0GSPBYCCE; 3.0GSPEFS; 3.0GSMEFS, 4.3GLPBYC; 4.3GSPBYC; 4.3GIPBYCCE, 4.3GLPEFS; 4.3GiPEFS, 4.3GLPLKD; 4.3GLPLKE; 4.3GSPLKD, 4.3GLPWTC; 4.3GLPWTR; 4.3GSPWTC, 5.0GLPBYC;
3857068
3857068 Adapter kit
3.0GSMBYMCE; 3.0GSPBYCCE, 3.0GSMLKD; 3.0GSPLKD, 3.0GSMWTR; 3.0GSMWTS; 3.0GSPWTR, 3.0GSPBYCCE; 3.0GSPEFS; 3.0GSMEFS, 4.3GLPBYC; 4.3GSPBYC; 4.3GIPBYCCE, 4.3GLPEFS; 4.3GiPEFS, 4.3GLPLKD; 4.3GLPLKE; 4.3GSPLKD, 4.3GLPWTC; 4.3GLPWTR; 4.3GSPWTC, 5.0GLPBYC;
3851758
3851758 Adapter kit
4.3GL-A; 4.3GL-B; 4.3GL-C, 4.3GXi-B; 4.3GXi-BF; 4.3OSi-B, 4.3GXi-C; 4.3GXi-CF; 4.3GXi-D, 4.3GXi-E; 4.3GXi-EF; 4.3OSi-E, 5.0FIPHUBCE; 5.0FIPHUCCE; 5.0FIPHUECE, 5.0GXi-A; 5.7Gi-A; 5.7GXi-A, 5.0GXi-B; 5.0GXi-BF; 5.0OSi-B, 5.0GXi-C; 5.0GXi-CF; 5.0GXi-D,
3852017
3852017 Adapter, fuel line
4.3GLPBYC; 4.3GSPBYC; 4.3GIPBYCCE, 4.3GLPHUB; 4.3GSPHUB; 4.3GSPHUS, 4.3GLPLKD; 4.3GLPLKE; 4.3GSPLKD, 4.3GLPNCA; 4.3GLPNCB; 4.3GLPNCS, 4.3GLPWTC; 4.3GLPWTR; 4.3GSPWTC, 5.0GLPBYC; 5.0GiPBYCCE; 5.7GSPBYC, 5.0GLPWTR; 5.0GiPWTR; 5.7GSIPWTR, 5.7GiPHUS, 5.7
3850039
3850039 Adapter
4.3GLPBYC; 4.3GSPBYC; 4.3GIPBYCCE, 4.3GLPEFS; 4.3GiPEFS, 4.3GLPLKD; 4.3GLPLKE; 4.3GSPLKD, 4.3GLPWTC; 4.3GLPWTR; 4.3GSPWTC, 4.3GXi-A, 5.0GLPBYC; 5.0GiPBYCCE; 5.7GSPBYC, 5.0GLPEFS; 5.0GiPEFS; 5.7GSPEFS, 5.0GLPWTR; 5.0GiPWTR; 5.7GSIPWTR, 5.0GXi-A; 5.7Gi