21010243 Air cleaner Volvo.Penta
TAD550GE; TAD551GE; TAD750GE, TD520GE; TAD530GE; TAD531GE
Air
Price: query
Rating:
You can buy parts:
As an associate, we earn commssions on qualifying purchases through the links below
![Merry Christmas Penguin Tree Kitchen Rugs and Mats [2 PCS] Non-Slip Soft Microfiber Floor Mat Washable Carpet Set for Kitchen, Room, Sink, Laundry, Office, Door 19.7"x27.6"+19.7"x47.2" (21010243)](http://c6.a2109.com/_150/aws_api/51h/51hqo/51hqoank9el.jpg)
$27.99
02-04-2023
-: -
Merry Christmas Penguin Tree Kitchen Rugs and Mats [2 PCS] Non-Slip Soft Microfiber Floor Mat Washable Carpet Set for Kitchen, Room, Sink, Laundry, Office, Door 19.7"x27.6"+19.7"x47.2" (21010243)
High-quality Materials: Floor mat is made of 100% polyester, non-slip star rubber sole, velvet edging, soft surface, non-slip bottom, and comfortable foot feel.The high-density space elastic cotton interlayer has strong water absorption. || Packaging and Dimensions: You will get floor mats in dimensions of 19.7" x 27.6" and 19.7" x 47.2". One long and one short make them just fit the size of the kitchen. || Easy to Care : Floor mat can washable with low fluff height and will not lose fluff. The edging is not easy to shrink and deform. Not machine washable. || Multipurpose: Floor mats are a good way to keep the floor clean and tidy. Excellent water absorption can protect floors from oil, moisture, sauces or food residues. || Remarks: During transportation, the floor mat may have creases. After receiving it, place it flat for 3-5 hours, the creases will disappear, please rest assured to buy!
High-quality Materials: Floor mat is made of 100% polyester, non-slip star rubber sole, velvet edging, soft surface, non-slip bottom, and comfortable foot feel.The high-density space elastic cotton interlayer has strong water absorption. || Packaging and Dimensions: You will get floor mats in dimensions of 19.7" x 27.6" and 19.7" x 47.2". One long and one short make them just fit the size of the kitchen. || Easy to Care : Floor mat can washable with low fluff height and will not lose fluff. The edging is not easy to shrink and deform. Not machine washable. || Multipurpose: Floor mats are a good way to keep the floor clean and tidy. Excellent water absorption can protect floors from oil, moisture, sauces or food residues. || Remarks: During transportation, the floor mat may have creases. After receiving it, place it flat for 3-5 hours, the creases will disappear, please rest assured to buy!
$31.99
18-02-2022
-: -
Dining Room Chair Covers Set of 4, Merry Christmas Penguin Christmas Tree Print Slipcovers Super Fit Stretch Spandex Removable Washable Chair Covers Protector for Hotel, Kitchen,Ceremony (21010243)
High-quality Fabric: Dining chair cover is made of 85% polyester fiber and 15% spandex. Smooth and comfortable, anti-wrinkle and durable, well made sewn-in elastic band makes it securely fit. || Perfect Size: Stretch dining chair cover fits normal and high-back parson chairs and most chairs. Chair-back height 19.7-23.6 inches. Chair seat width and length 15-17.7 inches and thickness 1.5-4 inches. Kindly measure your chairs before ordering. || Perfect Chair Protector: Dining chair cover not only protects your chair from spills, stains, wear and tear, dirts and pets damages, but also conceals blemishes. It is a good decoration. Ideal for families with kids, dogs and cats. || Wide Application: Armless chair slipcover can achieve the effect of refurbishing old chairs and extend the life of the chair to save your money, freshen up your chair. Decorative chair covers can be used in living rooms, wedding banquets, hotels, conferences, celebrations, ceremonies, restaurants, etc. || Easy to Use and Maintain: Our kitchen chair covers are easy to install and remove, and you can get a new, fit look in just a few steps. It can be washed by hand or machine, easy to clean and maintenance. If you want other patterns, please come to the store to buy.
High-quality Fabric: Dining chair cover is made of 85% polyester fiber and 15% spandex. Smooth and comfortable, anti-wrinkle and durable, well made sewn-in elastic band makes it securely fit. || Perfect Size: Stretch dining chair cover fits normal and high-back parson chairs and most chairs. Chair-back height 19.7-23.6 inches. Chair seat width and length 15-17.7 inches and thickness 1.5-4 inches. Kindly measure your chairs before ordering. || Perfect Chair Protector: Dining chair cover not only protects your chair from spills, stains, wear and tear, dirts and pets damages, but also conceals blemishes. It is a good decoration. Ideal for families with kids, dogs and cats. || Wide Application: Armless chair slipcover can achieve the effect of refurbishing old chairs and extend the life of the chair to save your money, freshen up your chair. Decorative chair covers can be used in living rooms, wedding banquets, hotels, conferences, celebrations, ceremonies, restaurants, etc. || Easy to Use and Maintain: Our kitchen chair covers are easy to install and remove, and you can get a new, fit look in just a few steps. It can be washed by hand or machine, easy to clean and maintenance. If you want other patterns, please come to the store to buy.
$16.99
19-08-2022
-: -
Dining Room Chair Covers Set of 2, Merry Christmas Penguin Christmas Tree Print Slipcovers Super Fit Stretch Spandex Removable Washable Chair Covers Protector for Hotel, Kitchen,Ceremony (21010243)
High-quality Fabric: Dining chair cover is made of 85% polyester fiber and 15% spandex. Smooth and comfortable, anti-wrinkle and durable, well made sewn-in elastic band makes it securely fit. || Perfect Size: Stretch dining chair cover fits normal and high-back parson chairs and most chairs. Chair-back height 19.7-23.6 inches. Chair seat width and length 15-17.7 inches and thickness 1.5-4 inches. Kindly measure your chairs before ordering. || Perfect Chair Protector: Dining chair cover not only protects your chair from spills, stains, wear and tear, dirts and pets damages, but also conceals blemishes. It is a good decoration. Ideal for families with kids, dogs and cats. || Wide Application: Armless chair slipcover can achieve the effect of refurbishing old chairs and extend the life of the chair to save your money, freshen up your chair. Decorative chair covers can be used in living rooms, wedding banquets, hotels, conferences, celebrations, ceremonies, restaurants, etc. || Easy to Use and Maintain: Our kitchen chair covers are easy to install and remove, and you can get a new, fit look in just a few steps. It can be washed by hand or machine, easy to clean and maintenance. If you want other patterns, please come to the store to buy.
High-quality Fabric: Dining chair cover is made of 85% polyester fiber and 15% spandex. Smooth and comfortable, anti-wrinkle and durable, well made sewn-in elastic band makes it securely fit. || Perfect Size: Stretch dining chair cover fits normal and high-back parson chairs and most chairs. Chair-back height 19.7-23.6 inches. Chair seat width and length 15-17.7 inches and thickness 1.5-4 inches. Kindly measure your chairs before ordering. || Perfect Chair Protector: Dining chair cover not only protects your chair from spills, stains, wear and tear, dirts and pets damages, but also conceals blemishes. It is a good decoration. Ideal for families with kids, dogs and cats. || Wide Application: Armless chair slipcover can achieve the effect of refurbishing old chairs and extend the life of the chair to save your money, freshen up your chair. Decorative chair covers can be used in living rooms, wedding banquets, hotels, conferences, celebrations, ceremonies, restaurants, etc. || Easy to Use and Maintain: Our kitchen chair covers are easy to install and remove, and you can get a new, fit look in just a few steps. It can be washed by hand or machine, easy to clean and maintenance. If you want other patterns, please come to the store to buy.
Number on catalog scheme: 1
Compatible models:
Volvo Penta entire parts catalog list:
- Air Filter with Installation Components » 21010243
Information:
START BY:a. remove cylinder headsb. remove oil pan 1. Remove the carbon from the top inside surface of the cylinders with tool (A). 2. Turn the crankshaft until two pistons are at bottom center.3. Remove connecting rod caps (1) from the two connecting rods. Put pieces of rubber hose or tape on the threads of the connecting rod bolts as protection for the crankshaft.4. Push the pistons and connecting rods away from the crankshaft until the piston rings are above the cylinder block. 5. Remove the two pistons (2) and the connecting rods. Keep each connecting rod cap with its respective connecting rod and piston. Put identification on each connecting rod as to its location for use at installation.
Do not turn the crankshaft while any of the connecting rods are in the engine without the caps installed.
6. Do Steps 2 through 5 for the remainder of the pistons.Install Pistons And Connecting Rod Assemblies
1. Put clean engine oil on the piston rings, connecting rod bearings, cylinder walls and crankshaft bearing journals.2. Turn the crankshaft until the bearing journal for the pistons to be installed is at bottom center.3. Make sure the piston ring gaps are at least 120° apart on the piston.4. Use tool (A), and install the piston in position in the same cylinder bore from which it was removed. The hole (crater) in the top of the piston must be toward (nearest) the center of the engine. For more detail about the installation of connecting rod bearings, see Remove And Install Connecting Rod Bearings.5. Check the bearing clearances with tool (B).6. Put 2P2506 Thread Lubricant on the threads of the bolts and contact surfaces of the nuts for connecting rod caps.
When the connecting rod caps are installed, make sure that the number on the side of the cap is next to and respective with the number on the side of the connecting rod.
7. Put the cap (1) in position on the connecting rod, and install the nuts. Tighten the nuts to a torque of 40 4 N m (30 3 lb.ft.). Put a mark on each nut and the end of each bolt. Tighten the nuts 60 5° more. 8. Check the side clearance between the connecting rods on the same crankshaft journal. Clearance must be 0.08 mm (.003 in.) for new rods.9. Do Steps 1 through 8 for the remainder of the pistons.END BY:a. install cylinder headsb. install oil panDisassemble Pistons And Connecting Rod Assemblies
START BY:a. remove pistons and connecting rod assemblies 1. Remove the rings from the piston with tool (A). 2. Remove the bearings from the connecting rod and connecting rod cap.3. Remove snap rings (2), pin (1) and connecting rod (3) from the piston.4. See Use of Piston Pin Bearing Removal And Installation Tools, Special Instructions, Form No. SMHS7295, for more information of removal and installation of piston pin bearings. 5. Heat the connecting rod to a temperature of 176 to 260°C (350 to 500°F). Put 5P8654 Spacer (11) in the base plate. Put the connecting rod on the base plate of tooling (B).6. Put the connecting rod piston pin bearing end in the center of the port assembly of tooling (B). Install pin (7) in the center of the bore for the connecting rod bearings.7. Install 5P9653 Adapter (9). Put the hole in the adapter in alignment with the hole in the base plate of tooling (B).8. Install clamp bar (10) and clamp pin (6).9. Install new piston pin bearing (5) on adapter (9). The old bearing is pushed out by tooling (B) as the new bearing is installed.10. Put 5P8645 Adapter (8) in position as shown with the taper side down. The piston pin bearing joint must be in alignment with the hole in adapter (9) and the base plate of tooling (B).11. Put pusher (4) on adapter (8).12. Use tooling (B) to push the new piston pin bearing into the connecting rod until adapter (8) of tooling (B) makes full contact with the connecting rod surface.13. Remove the connecting rod and the old piston pin bearing from tooling (B).14. Check the piston pin bearing bore diameter after the bearing is installed. The correct dimension is 38.125 0.008 mm (1.5010 .0003 in.).Assemble Pistons And Connecting Rod Assemblies
1. Install connecting rod (1) in the piston with the boss on small end of connecting rod on the same side as the hole (crater) in top of the piston.2. Install piston pin (2) and snap ring (3).3. When old pistons are to be used, clean the piston grooves with an acceptable ring groove cleaner.4. Install the spring for the oil ring. Install the oil ring with tool (A). The gap in the ring must be approximately 180° from the oil ring spring connections.5. Install the compression ring with tool (B). The side of the ring that has the identification "TOP" must be toward the top of the piston. The gaps in the rings must be approximately 120° apart. Compression rings that do not have identification must be installed with the edge that has the bevel toward the top of the piston.6. Install connecting rod bearings.END BY:a. install pistons and connecting rod assemblies
Do not turn the crankshaft while any of the connecting rods are in the engine without the caps installed.
6. Do Steps 2 through 5 for the remainder of the pistons.Install Pistons And Connecting Rod Assemblies
1. Put clean engine oil on the piston rings, connecting rod bearings, cylinder walls and crankshaft bearing journals.2. Turn the crankshaft until the bearing journal for the pistons to be installed is at bottom center.3. Make sure the piston ring gaps are at least 120° apart on the piston.4. Use tool (A), and install the piston in position in the same cylinder bore from which it was removed. The hole (crater) in the top of the piston must be toward (nearest) the center of the engine. For more detail about the installation of connecting rod bearings, see Remove And Install Connecting Rod Bearings.5. Check the bearing clearances with tool (B).6. Put 2P2506 Thread Lubricant on the threads of the bolts and contact surfaces of the nuts for connecting rod caps.
When the connecting rod caps are installed, make sure that the number on the side of the cap is next to and respective with the number on the side of the connecting rod.
7. Put the cap (1) in position on the connecting rod, and install the nuts. Tighten the nuts to a torque of 40 4 N m (30 3 lb.ft.). Put a mark on each nut and the end of each bolt. Tighten the nuts 60 5° more. 8. Check the side clearance between the connecting rods on the same crankshaft journal. Clearance must be 0.08 mm (.003 in.) for new rods.9. Do Steps 1 through 8 for the remainder of the pistons.END BY:a. install cylinder headsb. install oil panDisassemble Pistons And Connecting Rod Assemblies
START BY:a. remove pistons and connecting rod assemblies 1. Remove the rings from the piston with tool (A). 2. Remove the bearings from the connecting rod and connecting rod cap.3. Remove snap rings (2), pin (1) and connecting rod (3) from the piston.4. See Use of Piston Pin Bearing Removal And Installation Tools, Special Instructions, Form No. SMHS7295, for more information of removal and installation of piston pin bearings. 5. Heat the connecting rod to a temperature of 176 to 260°C (350 to 500°F). Put 5P8654 Spacer (11) in the base plate. Put the connecting rod on the base plate of tooling (B).6. Put the connecting rod piston pin bearing end in the center of the port assembly of tooling (B). Install pin (7) in the center of the bore for the connecting rod bearings.7. Install 5P9653 Adapter (9). Put the hole in the adapter in alignment with the hole in the base plate of tooling (B).8. Install clamp bar (10) and clamp pin (6).9. Install new piston pin bearing (5) on adapter (9). The old bearing is pushed out by tooling (B) as the new bearing is installed.10. Put 5P8645 Adapter (8) in position as shown with the taper side down. The piston pin bearing joint must be in alignment with the hole in adapter (9) and the base plate of tooling (B).11. Put pusher (4) on adapter (8).12. Use tooling (B) to push the new piston pin bearing into the connecting rod until adapter (8) of tooling (B) makes full contact with the connecting rod surface.13. Remove the connecting rod and the old piston pin bearing from tooling (B).14. Check the piston pin bearing bore diameter after the bearing is installed. The correct dimension is 38.125 0.008 mm (1.5010 .0003 in.).Assemble Pistons And Connecting Rod Assemblies
1. Install connecting rod (1) in the piston with the boss on small end of connecting rod on the same side as the hole (crater) in top of the piston.2. Install piston pin (2) and snap ring (3).3. When old pistons are to be used, clean the piston grooves with an acceptable ring groove cleaner.4. Install the spring for the oil ring. Install the oil ring with tool (A). The gap in the ring must be approximately 180° from the oil ring spring connections.5. Install the compression ring with tool (B). The side of the ring that has the identification "TOP" must be toward the top of the piston. The gaps in the rings must be approximately 120° apart. Compression rings that do not have identification must be installed with the edge that has the bevel toward the top of the piston.6. Install connecting rod bearings.END BY:a. install pistons and connecting rod assemblies
Parts air Volvo Penta:
20572806
20405836
20405837
21020090
21010247
20797197
21010254
21010248