836030 Belt protector Volvo.Penta
D70B; D70B PP; D70B K
Belt
Price: query
Rating:
You can buy parts:
As an associate, we earn commssions on qualifying purchases through the links below
$45.52
08-01-2024
0.2425[0.11] Pounds
US: CCIYU Auto Parts
cciyu Mass Air Flow Sensor Fit for 2016-2019 for Buick Cascada L4 1.6L 2016-2019 for Buick Encore L4 1.4L, 12671625, 13432261, 836030, 13432261
cciyu Fitment - MAF fit for 2016-2019 For Buick Cascada L4 1.6L, 2016-2019 For Buick Encore L4 1.4L, 2016 For Chevrolet Cruze L4 1.4L-(Note: Only Fit DI (Direct Injection), Not Fit MFI (Multiple Fuel Injection) || Replaces OE - 12671625, 13432261, 836030, 13432261 || Function - It can effectively solve the problem of Acceleration difference, Idling instability and Exhaust pipe smoke for your car. Let you drive easily and joyfully.Before purchasing this part, check the compatibility information or call your local dealer to verify the correct OEM part number and clean out the air box and replace the air filter before installing the MAF Meter, or the Code and Check Engine Light may keep showing even if you replace a new MAF || Tips to one - If it works well at first but months later can not work, Please clean the inside of the duct and the air filter; If the Engine code with P0100 or P0101, please check the air flow meter plug for any contact failure and measure it with a multimeter; || Tips to two - When the Engine code with P0102, maybe the air duct in the car is too dirty, and dust enters the sensor head, which weakens the signal strength; If everthing is alright but the car is not stable at idle speed, and the throttle is weak when driving at low speed, please check the valve and estimate the leak. It must be sealed.
cciyu Fitment - MAF fit for 2016-2019 For Buick Cascada L4 1.6L, 2016-2019 For Buick Encore L4 1.4L, 2016 For Chevrolet Cruze L4 1.4L-(Note: Only Fit DI (Direct Injection), Not Fit MFI (Multiple Fuel Injection) || Replaces OE - 12671625, 13432261, 836030, 13432261 || Function - It can effectively solve the problem of Acceleration difference, Idling instability and Exhaust pipe smoke for your car. Let you drive easily and joyfully.Before purchasing this part, check the compatibility information or call your local dealer to verify the correct OEM part number and clean out the air box and replace the air filter before installing the MAF Meter, or the Code and Check Engine Light may keep showing even if you replace a new MAF || Tips to one - If it works well at first but months later can not work, Please clean the inside of the duct and the air filter; If the Engine code with P0100 or P0101, please check the air flow meter plug for any contact failure and measure it with a multimeter; || Tips to two - When the Engine code with P0102, maybe the air duct in the car is too dirty, and dust enters the sensor head, which weakens the signal strength; If everthing is alright but the car is not stable at idle speed, and the throttle is weak when driving at low speed, please check the valve and estimate the leak. It must be sealed.
$43.99
08-01-2024
0.2425[0.11] Pounds
US: Ineedup
INEEDUP Mass Air Flow Sensor MAF 12671625, 13432261, 836030, 13432261 Fit for 2016-2019 For Buick Cascada L4 1.6L
Ineedup COMPATIBILITY - 2016-2019 For Buick Cascada L4 1.6L,2016-2019 For Buick Encore L4 1.4L,2016 For Chevrolet Cruze L4 1.4L-(Note: Only Fit DI (Direct Injection), Not Fit MFI (Multiple Fuel Injection), || PART NUMBERS - 12671625, 13432261, 836030, 13432261 || FUNCTION - Examine the intake volume or temperature of the engine, and some measure afor TMospheric pressure. According to the size of the intake air, it is converted into electrical signals, calculated in the ECU and controlled by the throttle position sensor to control the engine speed (fuel injection time and ignition time control). || NOTICE - Please clean out the air box and replace the air box before installing the MAF Meter, or the Code and Check Engine Light may keep showing even if you replace a new Mass Air Flow Sensor. || WHAT YOU KNOW - Before purchase the MAF Meter, Please confirm compatibility by using the model sheet at the top of the year/brand/model.
Ineedup COMPATIBILITY - 2016-2019 For Buick Cascada L4 1.6L,2016-2019 For Buick Encore L4 1.4L,2016 For Chevrolet Cruze L4 1.4L-(Note: Only Fit DI (Direct Injection), Not Fit MFI (Multiple Fuel Injection), || PART NUMBERS - 12671625, 13432261, 836030, 13432261 || FUNCTION - Examine the intake volume or temperature of the engine, and some measure afor TMospheric pressure. According to the size of the intake air, it is converted into electrical signals, calculated in the ECU and controlled by the throttle position sensor to control the engine speed (fuel injection time and ignition time control). || NOTICE - Please clean out the air box and replace the air box before installing the MAF Meter, or the Code and Check Engine Light may keep showing even if you replace a new Mass Air Flow Sensor. || WHAT YOU KNOW - Before purchase the MAF Meter, Please confirm compatibility by using the model sheet at the top of the year/brand/model.
$42.99
08-01-2024
0.2425[0.11] Pounds
US: ROADFAR
ROADFAR Mass Air Flow Sensor MAF Meter Fits For 2016-2019 For Buick Cascada 2016-2019 For Buick Encore 2016 For Chevrolet Cruze 12671625 13432261 836030 13432261
ROADFAR 🛒Fitment - 2016-2019 For Buick Cascada L4 1.6L,2016-2019 For Buick Encore L4 1.4L,2016 For Chevrolet Cruze L4 1.4L-(Note: Only Fit DI (Direct Injection), Not Fit MFI (Multiple Fuel Injection) || 🛒FEATURE- Mainly used to measure the engine's intake air measurement, ECU matching and fuel injection volume correction and other engine operating indicators.100% resolder of critical components ensures superior electrical connections, no intermittent failures and longer product life. || 🛒PROFESSIONAL - If your vehicle has problems such as unstable idling, bad performance, vehicle stalling, etc., then you may need to replace a new air flow meter. As a professional manufacturer of automotive air flow meters, we insist on providing you with high-quality automotive zero Accessories. || 🛒TIPS - After the flame is turned off during installation, the negative wire of the car battery needs to be dislodged to ensure that the circuit is powered off before installation to avoid failure or failure code. After installation, confirm that the MAF Sensor is not loose and the pipeline has no air leakage before restoring the battery negative electrode. Line and ECU data. After the installation is complete, please wait for 1 minute before starting the vehicle. || 🛒NOTE - Before purchase this parts, please check the compatibility information or call your local dealer to verify the correct OEM part number and remember to clean out the air box and replace the air box before installing the MAF Meter, or the Code and Check Engine Light may keep showing even if you replace a new MAF.
ROADFAR 🛒Fitment - 2016-2019 For Buick Cascada L4 1.6L,2016-2019 For Buick Encore L4 1.4L,2016 For Chevrolet Cruze L4 1.4L-(Note: Only Fit DI (Direct Injection), Not Fit MFI (Multiple Fuel Injection) || 🛒FEATURE- Mainly used to measure the engine's intake air measurement, ECU matching and fuel injection volume correction and other engine operating indicators.100% resolder of critical components ensures superior electrical connections, no intermittent failures and longer product life. || 🛒PROFESSIONAL - If your vehicle has problems such as unstable idling, bad performance, vehicle stalling, etc., then you may need to replace a new air flow meter. As a professional manufacturer of automotive air flow meters, we insist on providing you with high-quality automotive zero Accessories. || 🛒TIPS - After the flame is turned off during installation, the negative wire of the car battery needs to be dislodged to ensure that the circuit is powered off before installation to avoid failure or failure code. After installation, confirm that the MAF Sensor is not loose and the pipeline has no air leakage before restoring the battery negative electrode. Line and ECU data. After the installation is complete, please wait for 1 minute before starting the vehicle. || 🛒NOTE - Before purchase this parts, please check the compatibility information or call your local dealer to verify the correct OEM part number and remember to clean out the air box and replace the air box before installing the MAF Meter, or the Code and Check Engine Light may keep showing even if you replace a new MAF.
Number on catalog scheme: 18
Compatible models:
D70B; D70B PP; D70B K
Volvo.Penta
Volvo Penta entire parts catalog list:
Information:
Sulfuric Acid Burn Hazard may cause serious personal injury or death.The exhaust gas cooler may contain a small amount of sulfuric acid. The use of fuel with sulfur levels greater than 15 ppm may increase the amount of sulfuric acid formed. The sulfuric acid may spill from the cooler during service of the engine. The sulfuric acid will burn the eyes, skin and clothing on contact. Always wear the appropriate personal protective equipment (PPE) that is noted on a material safety data sheet (MSDS) for sulfuric acid. Always follow the directions for first aid that are noted on a material safety data sheet (MSDS) for sulfuric acid.
Ensure that wiring harness are correctly routed and the cable straps are not over tightened. Over tightening of the cable straps will damage the wiring harness convoluting.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that all components are clean and free from wear and damage. If necessary, replace any components that are worn or damaged.
Illustration 1 g03458958
If necessary, follow Step 2.a through Step 2.d in order to install bracket (28).
Position bracket (28) onto cylinder head (29).
Install bolts (27) hand tight. Ensure that rubber sleeve (31) is correctly positioned into recess of bracket (28).
Tighten bolts (27) to a torque of 22 N m (195 lb in).
Install new cable straps (30). Note: Ensure that the cable straps meet the Original Equipment Manufacturer (OEM) specification.
Illustration 2 g03458960
Illustration 3 g03458961
Position a new gasket (17) onto inlet air control assembly (8). Ensure gasket (17) is correctly installed into locating Pins (X).
Loosen bolts (33) for bracket (32).
Illustration 4 g03456497
Illustration 5 g03456498
Illustration 6 g03458961
Position inlet air control assembly (8) onto the bracket. Note: Ensure that the inlet air control assembly is correctly installed onto the hose assembly for the inlet elbow.
Install bolts (26) to inlet air control assembly (8) hand tight.
Install bolts (14) hand tight. Ensure that the gasket (17) remains correctly positioned onto inlet air control assembly (8).
Tighten bolts (26) to a torque of 22 N m (195 lb in).
Tighten bolts (14) to a torque of 22 N m (195 lb in).
Tighten bolts (33) for bracket (32) to a torque of 44 N m (32 lb ft).
Position tube assembly (25) onto inlet air control assembly (8). Loosely install bolt (24) and bolt (15) to the tube assembly.
Install sealing washer (22) (not shown) to banjo bolt (23). Install the banjo bolt to tube assembly (25) and install remaining sealing washer (22) (not shown) to the banjo bolt.
Tighten banjo bolt (23) to a torque of 15 N m (133 lb in).
Tighten bolt (24) and bolt (15) to a torque of 22 N m (195 lb in).
Position a new hose clamp (18) onto hose assembly (19). Install hose assembly to inlet air control assembly (8). Tighten hose clamp (18).
Position a new hose clamp (20) onto hose assembly (21). Install hose assembly to inlet air control assembly (8). Tighten hose clamp (20).
Install temperature sensor (16) to the inlet air control assembly. Refer to Disassembly and Assembly, "Temperature Sensor (Cooled Exhaust Gas) - Remove and Install" for the correct procedure.
Connect hose assembly (13) to the wastegate actuator. Slide clip (12) along hose assembly (13). Ensure that the clip is correctly positioned onto the hose.
Illustration 7 g03456496
Illustration 8 g02518536
Hose clamp Type (A)
Hose clamp Type (B)
Tighten hose clamps (10) on the hose assembly that connects inlet air control assembly (8) to inlet elbow (11). Refer to Illustration 8 in order to determine the correct type of hose clamp. Tighten hose clamps Type (A) to a torque of 11 N m (97 lb in).Tighten hose clamps Type (B) to a torque of 7 N m (62 lb in).
Slide connection for wiring harness assembly (4) onto bracket (3). Connect engine wiring harness assembly (2) to wiring harness assembly (4) for wastegate solenoid (6).
Slide the connection for wiring harness assembly (5) onto bracket (3). Connect engine wiring harness assembly (1) to wiring harness assembly (5) for NRS valve (7).
Connect the hose assembly to connection (9) for inlet air control (8). Tighten the hose clamps to a torque of 6 N m (53 lb in).
Install new cabl
Parts belt Volvo Penta:
1505719
1505719 Belt element
D100A; D100AK; D100B, D120A; D120AK; TD120A, D70B; D70B PP; D70B K, TD120C, TID120FPP; TID120FG; TD120G
820885
1507066
1507066 Belt element
D70B; D70B PP; D70B K, TD60A; TD60B; TD60B PP, TD60D; TD60D-83; TD60DPP-83, TD70G; TD70G-83; TD70GPP