20459998 Volvo.Penta Camshaft bushing

Do not put side force on the shaft when tightening or removing the nut that holds the compressor wheel in position. Use a universal drive socket when tightening.
a. With the compressor wheel on the shaft, put a small amount of clean engine oil on the turbine shaft threads and the compressor wheel face that contacts with the nut.b. Install the nut, and tighten it to a torque of 14 to 17 N m (125 to 150 lb in) to push the compressor wheel on to the shaft.c. Remove the nut from the shaft. Apply 4C9500 Quick Cure Primer on