3584119 Connector Volvo.Penta
D2-75; D2-75B; D2-75C
Connector
Price: query
Rating:
Compatible models:
D2-75; D2-75B; D2-75C
Volvo.Penta
Volvo Penta entire parts catalog list:
Information:
Illustration 1 g00322667
Fuel Flow Schematic (Typical Example) (1) Fuel manifolds. (2) Fuel filter. (3) Fuel priming pump. (4) Fuel injectors. (5) Pressure regulating valve. (6) Fuel return to tank. (7) Primary fuel filter. (8) Fuel transfer pump. (9) Fuel line to filter. (10) Fuel supply line from the primary fuel filter. (11) Fuel line to priming pump.Fuel transfer pump (8) is located on the right side of the engine. The lower shaft of the engine oil pump drives the gear type transfer pump. Fuel from the supply tank is pulled through primary fuel filter (7) by fuel transfer pump (8) and sent to fuel filter (2) .Fuel transfer pump (8) has a check valve and a bypass valve. The check valve is located in the pump head assembly. The pump head assembly is located behind the connection for line (9). The check valve prevents fuel flow back through the transfer pump when fuel priming pump (3) is used. The bypass valve is located behind a cap (plug) in the drive end of the pump. The bypass valve limits the maximum pressure of the fuel. The bypass valve will open the outlet side of the pump to the pump inlet if the fuel pressure exceeds 860 kPa (125 psi). This process helps prevent damage to the fuel system components from too much pressure.
Illustration 2 g00316127
Right Front Of Engine (Typical Example) (1) Fuel manifolds. (2) Fuel filter. (8) Fuel transfer pump. (9) Fuel line to filter. (10) Fuel supply line from the primary fuel filter. (11) Fuel line to the priming pump.The transfer pump pushes fuel through the fuel filter (2) on the front of the engine to fuel manifolds (1). The fuel flows through the manifold to inlet fuel line (13) connected to the right side of each cylinder head. Filter screens are located in the ports of the unit injector. A drilled passage (14) in cylinder head (15) takes fuel to a circular chamber around the injector. The chamber is made by the O-rings on the outside diameter of fuel injector (4) and by the injector bore in the cylinder head.
Illustration 3 g00322726
Cylinder Heads (4) Injector. (12) Outlet fuel line. (13) Inlet fuel line.Only part of the fuel in the chamber is used for injection. Approximately three to five times the amount of fuel that is needed for normal combustion flows through the chamber. This fuel then flows to a drilled passage in the left side of the cylinder head. This passage is connected by outlet fuel line (12) to the bottom section of the fuel manifold. This constant flow of fuel around the injectors helps to cool the injectors.
Illustration 4 g00322727
Fuel Flow Through Injector (4) Fuel injector. (12) Outlet fuel line. (13) Inlet fuel line. (14) Drilled passage. (15) Cylinder head. (16) Cylinder.The fuel flows back through the fuel manifold. The fuel flows to pressure regulating valve (5) on the front of the right fuel manifold. The fuel flows through this valve. Fuel then flows back to the tank.Check each engine installation for excess fuel flow. The excess fuel flow is based on the amount of fuel that is consumed. The minimum flow is three times the amount of fuel that is consumed. Excess fuel is then returned to the fuel tank. This will make sure that any air in the system will be removed before the fuel is sent back to the injectors.Pressure regulating valve (5) has an arrangement of a spring and a plunger. This arrangement is between the bottom section of the fuel manifolds and the line that returns fuel to the tank. The valve keeps the pressure of the fuel between 415 to 450 kPa (60 to 65 psi).Fuel Transfer Pump
Illustration 5 g00307484
(1) Check valve. (2) Bypass valve.The fuel transfer pump is located on the right side of the engine. The lower shaft of the engine oil pump drives the gear type transfer pump. Fuel from the supply tank is pulled through the primary fuel filter by the fuel transfer pump and sent to the fuel filter housing.The fuel transfer pump has a check valve (1) and a bypass valve (2). The check valve is located in the pump head assembly. The check valve prevents fuel flow back through the transfer pump when the fuel priming pump is used. The bypass valve is located behind a cap (plug) in the drive end of the pump. The bypass valve limits the maximum pressure of the fuel. The bypass valve will open the outlet side of the pump to the pump inlet if the fuel pressure exceeds 860 kPa (125 psi). This process helps prevent damage to the fuel system components from too much pressure.Fuel Injection Control Linkage
Illustration 6 g00322845
Fuel Injector Control Linkage (1) Fuel injector. (2) Control shaft. (3) Bellcrank. (4) Control rod. (5) Rack. (6) Lever. (7) Governor shaft. (8) Control shaft. (9) Cross shaft. A fuel injector (1) is located in each cylinder head. The position of rack (5) controls the amount of fuel that is injected into the cylinder. Pull the rack out of the injector for more fuel. Push the rack in the injector for less fuel. The rack position is changed by bellcrank (3). The bellcrank is moved by control rod (4). The control rods have an adjustment screw on the top. The adjustment screw is used to synchronize the injectors. The control rods are spring loaded. If the rack of one injector sticks, it will still be possible for the governor to control the other racks so the engine can be shutdown. Each control rod on the right side of the engine is connected by a lever (6) to control shaft (8). When the governor shaft (7) is viewed from the front of the engine and the governor shaft rotates in a clockwise direction, the action of the governor linkage moves control shaft (8) in a counterclockwise direction. This counterclockwise direction is direction of the fuel "ON".Right control shaft (8) and left control shaft (2) are connected by cross shaft (9). The linkage between
Parts connector Volvo Penta:
944306
944306 Connector
1372, 2001; 2001B; 2001AG, 230A; 230B; 250A, 251A, 430; 430A; 430B, 5.0GXiCE-J; 5.0GXiCE-JF; 5.0GXiCE-M, 5.0GXiE-JF; 5.0GXiE-J; 5.0OSiE-JF, 5.7GiCE-300-J; 5.7GiCE-300-JF; 5.7GXiCE-J, 5.7GiE-300-J; 5.7GiE-300-JF; 5.7GXiE-J, 500; 500A; 501A, 571A, 740A
851712
851712 Connector kit
230A; 230B; 250A, 251A, 430; 430A; 430B, 500; 500A; 501A, 571A, 740A; BB740A, AD31D; AD31D-A; AD31XD, AD31L-A; AD31P-A; AD41L-A, AD41D; D41D; TAMD41D, AQ125B, AQ131A; AQ131B; AQ131C, AQ145B, AQ151A; AQ151B; AQ151C, AQ171A; AQ171C, AQ205A; AQ205LB, AQ
859836
859836 Connector
AD31L-A; AD31P-A; AD41L-A, D2-55; D2-55B; D2-55C, D2-75; D2-75B; D2-75C, MD22A; MD22A-A; MD22L-A, MD22L; MD22P; MD22L-B
3841287
3818997
3818997 Connector kit
D1-13; D1-13B; D1-20, D11A-A; D11A-B; D11A-C, D11B1-A MP; D11B2-A MP, D11B3-A MP; D11B4-A MP, D12D-A MH; D12D-B MH; D12D-C MH, D2-55; D2-55B; D2-55C, D2-75; D2-75B; D2-75C, D4-180I-F; D4-225A-F; D4-225I-F, D6-300A-F; D6-300D-F; D6-300I-F, D9A2A; D9A2
3584120
21190061