888084 Volvo.Penta Control cable

} } @media print { div.divFooter { position: fixed; bottom: 0; right: 0; } } Caterpillar: Confidential Yellow
PARTS STOCK ACTION NEEDED - PSP FOR UPDATING OR REPLACING THE ENGINE ON 950F WHEEL LOADERS - COSA LETTER NO. 4.1 - PS8016 - MAI LED COSA
  The information supplied in this service letter may not be valid after the termination date of this program.   Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
HEBE1414 AUGUST 6, 1993 COSA LETTER No. 4.1 ***************** * PARTS STOCK * PRODUCT SUPPORT PROGRAM FOR UPDATING OR * ACTION NEEDED * REPLACING THE ENGINE ON 950F WHEEL LOADERS ***************** 1000, 1052 PS8016 This Program can be administrated either before or after a failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS8016" as the Part Number, and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code, and if administered after failure, use "96" as the Warranty Claim Description Code. This Program replaces two recently released Support Programs: PS4903 - Service Letter dated April 16, 1993 New engine oil pan, oil level gauge, and turbocharger, and adjusting the injection fuel timing PS4981 - Service Letter dated April 17, 1993 Adjusting the fuel governor Please refer to following documentation as needed: TIB dated May 6, 1993 - Comp code 1060 Machining burr in turbocharger compressor housing TIB dated May 20, 1993 - Comp code 1302 Oil pan interference with oil pump gear TIB dated May 6, 1993 - Comp code 1000 Engine low idle setting on 950F This program does not apply to dealers M142, M450. Termination Date
December 31, 1995 (exception: see Rework 7) INTRODUCTION Caterpillar is committed to providing fair customers value on all products sold. In the case of the 950F some users working in specific conditions have experienced a series of problems they would not normally expect from a Caterpillar product. The result is a level of satisfaction below that which Caterpillar strives for. When forced with such a challenge it is Caterpillar aim to restore customer satisfaction in as fair and equitable manner as possible. It is with this in mind the Product Support Program covering the 3116 engine fitted in the 950F has been initiated. This PSP provides solutions to customers to ensure that they obtain fair and equitable value from the product irrespective of when it was purchased. The technical solutions provided combined with the extended warranty coverage are intended to restore any customer confidence that may have been lost. As this program is implemented with our customer we count on your support to ensure that the full value of Caterpillar product purchased is realized. I. GUIDELINES ON HOW TO APPLY THIS PROGRAM 1. NEW UNITS IN DEALER'S INVENTORY Update the engine of the new units in dealer inventory to today's configuration with Rework 1 - Governor, Rework 2 - Turbocharger, Rework 3 - Oil Pan, Rework 4 - Turbocharger Compressor Housing, and Rework 6 - Pistons. Perform the appropriate reworks needed according to unit Serial Number. 2. RECENT UNITS Update the engine of field machines with Serial Numbers 6YG2229, 2234, 2235, 2240, 2247, 2250-2252, 2254-2256, 2258-2264, 2266-up (all these units should have engine Serial Numbers in the range 4TF6626-up) to today's configuration with Rework 3 - Oil Pan, and Rework 4 - Turbocharger Compressor Housing. IMPORTANT The units listed above have all the improvements related to the oil sooting except the larger oil pan. As they are recently sold units, and have not yet accumulated a high number of working hours, it is strongly recommended to install the new larger oil pan as soon as possible, but no later than next time the machine is in a workshop. 3. EARLY UNITS These are units with Serial Numbers 6YG1-2228, 2230-2233, 2236-2239, 2241-2246, 2248, 2249, 2253, 2257, 2265, and 5PJ1-45 (all these units should have engine Serial Numbers in the range 4TF1-6625). The more recent delivered units should be treated with priority. Before any other action, check engine blowby