3801244 Volvo.Penta Coolant pump


3801244 Coolant pump Volvo.Penta TAD734GE Coolant
3801244 Coolant pump Volvo Penta
Rating:
28

Buy Coolant pump 3801244 Volvo Penta genuine, new aftermarket parts with delivery

You can buy parts:

As an associate, we earn commssions on qualifying purchases through the links below
$1,894.01

31-03-2025
0.1102[0.05] Pounds
CN: Xiaohoca665544
3801244 22251409 Engine Cooling System Water Pump Assembly Compatible For VOLVO TAD734/752/753 Truck Parts
VDGOGHCN Function: Circulate and pressurize the coolant to carry away the heat of the engine and prevent the engine from overheating || Durable:The construction materials of the water pump have been carefully selected to prevent rust, corrosion,and coolant scaling || Better Performance:Case hardened bearings for long life,high load capacity and better tolerance to imbalance or vibration in the cooling system || Rigorous Testing: A meticulous testing process is carried out to ensure its outstanding performance,long-lasting high quality,and a long service life || 3801244 22251409 Engine Cooling System Water Pump Assembly Compatible For VOLVO TAD734/752/753 Truck Parts
$1,894.01

31-03-2025
0.1102[0.05] Pounds
CN: Xiaohoca665544
3801244 22251409 Engine Cooling System Water Pump Assembly Compatible For VOLVO TAD734/752/753 Truck Parts
VDGOGHCN Function: Circulate and pressurize the coolant to carry away the heat of the engine and prevent the engine from overheating || Durable:The construction materials of the water pump have been carefully selected to prevent rust, corrosion,and coolant scaling || Better Performance:Case hardened bearings for long life,high load capacity and better tolerance to imbalance or vibration in the cooling system || Rigorous Testing: A meticulous testing process is carried out to ensure its outstanding performance,long-lasting high quality,and a long service life || 3801244 22251409 Engine Cooling System Water Pump Assembly Compatible For VOLVO TAD734/752/753 Truck Parts
$588.66

31-03-2025

CN: Starhycfa
New Water Pump 3801244 21417491 3801164 85003894 Compatible with Volvo TAD734GE D7E B6R B7R
Starhycfa Product name:Water Pump || Part Number:3801244 21417491 3801164 || APPlication:Compatible with Volvo TAD734GE D7E B6R B7R || 1.Please carefully compare the pictures or OE numbers to match your original parts beCompatible withe purchasing the product. || 2.Please make sure that the model number, part number and photo is the same as yours beCompatible withe order. To Avoid placing wrong orders and wasting your precious time.
Number on catalog scheme: 19
 

Compatible models:

TAD734GE   Volvo.Penta

Volvo Penta entire parts catalog list:

Information:

1. Disconnect wires (2) from the valve cover base. Remove glow plug harnesses (1).2. Remove valve cover bases (3). 3. Disconnect elbow (4) to temperature regulator housing (7).4. Remove bracket (5) and bracket (6). Remove bracket (8). Remove the remainder of the 3/8" head bolts. Remove lifting bracket (9).5. Install three 5/16" -18 NC forged eyebolts in the cylinder head. Fasten a hoist to the cylinder head. 6. Remove cylinder head bolts (10). Remove the cylinder head. The weight of the cylinder head is 135 kg (300 lb.).
Do not put the cylinder head down on a flat surface. Direct injection nozzles extend out from the bottom surface of the cylinder head and will be damaged by the weight of the head.A new spacer plate gasket must be installed when the cylinder head is removed. See Remove & Install Spacer Plate.
Install Cylinder Head Assemblies
1. Thoroughly clean the spacer plate and bottom surface of the cylinder head. Install a new head gasket and water seals. Do not use any adhesives. A new spacer plate gasket must be used when the cylinder head is installed. See Remove & Install Spacer Plate. 2. Put the cylinder head into position on the spacer plate. Be careful not to damage the head gasket or water seals. 3. Put 5P3931 Anti-Seize Compound on the threads of head bolts (1). Install the cylinder head bolts and washers and tighten them as follows:a. Tighten bolts 1 through 20 in number sequence to 270 25 N m (200 20 lb ft).b. Tighten bolts 1 through 20 in number sequence to 447 20 N m (330 15 lb.ft.).c. Tighten bolts 1 through 20 in number sequence again to 447 20 N m (330 15 lb.ft.).4. Install glow plug harness (2). 5. Put rocker shaft assembly (4) into position on the cylinder head. Put 5P3931 Anti-Seize Compound on bolts (3). Install rocker shaft assembly bolts and washers. Tighten the bolts as follows:a. Tighten bolts 21 through 26 in number sequence to 270 25 N m (200 20 lb ft).b. Tighten bolts 21 through 26 in number sequence to 447 20 N m (330 15 lb.ft.).c. Tighten bolts 21 through 26 in number sequence again to 447 20 N m (330 15 lb.ft.). 6. Install bracket (6) and spacer (5) on the cylinder head. Tighten bolts (9) finger tight. Install the bolt that holds bracket (6) to the automatic timing advance housing and tighten to standard torque. Tighten bolts (9) to 43 7 N m (32 5 lb ft).7. Install bracket (8). Tighten bolts (11) finger tight. Tighten bolts (7) to standard torque. Tighten bolts (11) to 43 7 N m (32 5 lb ft).8. Follow Step 6 for bracket (12).9. Put 5P3931 Anti-Seize Compound on the remainder of 3/8" head bolts (10) and tighten to 43 7 N m (32 5 lb ft).10. Install lifting bracket (14).11. Put clean engine oil on the bridge dowels and on valve bridges (15). Install the valve bridges in their correct locations on the cylinder head.12. Make a connection between rocker arms (13) and the push rods with Tool (A). Make an adjustment of the valves to have a clearance of 0.38 mm (.015 in) for intake and 0.76 mm (.030 in) for exhaust. See Valve Clearance Setting in Testing & Adjusting. 13. Install valve cover base (21) on the cylinder head. Tighten the bolts in the sequence shown.14. Put clean engine oil or glycerin on the O-ring seal for adapter (19). Install adapter (19) and lock (16).15. Connect fuel line (17) to adapter (19). Tighten the fuel line nut to 40 7 N m (30 5 lb ft) with Tool (B).16. Install fuel line (20). Tighten the fuel line nuts to 40 7 N m (30 5 lb ft) with Tool (B).17. Connect elbow (18) to the temperature regulator housing.End By:a. install exhaust manifoldb. install rocker shaft assembly


Parts coolant Volvo Penta:

21073059
 
21073059 Coolant pipe
TAD550GE; TAD551GE; TAD750GE, TAD560VE; TAD561VE; TAD761VE, TAD734GE
20939278
 
20939278 Coolant pipe
TAD550GE; TAD551GE; TAD750GE, TAD734GE
Back to top