22935062 Volvo.Penta Cover


22935062 Cover Volvo.Penta D8A1-A MP; D8A2-A MP Cover
22935062 Cover Volvo Penta
Rating:
23

Buy Cover 22935062 Volvo Penta genuine, new aftermarket parts with delivery

You can buy parts:

As an associate, we earn commssions on qualifying purchases through the links below
$29.99
 

13-11-2023

-: -
Hihaha NO. 20867046 Touch Screen Display for CUE Infotainment System for Cadillac ATS CTS ELR Escalade SRX 13-17 / Gel Free Touch Screen Protector w/Trim Remove Tool/Durable / 1 Set
VEHICLE COMPATIBILTIY: Fit For Cadillac ATS 2013-2017, For Cadillac CTS 2014-2017, For Cadillac ELR 2014-2016, For Cadillac Escalade 2015-2017, For Cadillac Escalade ESV 2015-2017, For Cadillac SRX 2013-2016, For Cadillac XTS 2013-2017. This is a normal phenomenon to replace screen to those vehicle adopt with for CUE Infotainment system. || PRODUCT INFORMATION: This Cue Touch Screen Display Unlike the old gel based screen, this one adopt with anti glare coating for no gel tape to get faster touch response than olds. Replace the old or broken screen to get faster transmit, no more crack or shattered screen to see. || OE Number 20867046, 22912609, 22935062, 22980208, 23106489, 23243167, 23388826, 23447599. Provide a HD Film Screen for no scratching or orange peel blur. || NOTIFICATION:This new screen replacement adopt with fastern processor to avoid slow chip lag, come with dust proof rubber on side to anti ash and a removable plastic film on back to protect the screen. Equipped with suitable pliers and tools for convenient replacement without any damage. || PACKAGE LIST: 1 pc Screen, 1 set Trim Removal Tool. Please replace the screen carefully.
$30.49
 

13-11-2023

-: -
X AUTOHAUX 1 Set Touch Screen Display for CUE Infotainment System for Cadillac ATS CTS ELR Escalade SRX XTS 2013-2017 20867046 22912609 Gel Free Touch Screen Protector w/Trim Remove Tool
[OE Number of Car Touch Screen Display] 20867046, 22912609, 22935062, 22980208, 23106489, 23243167, 23388826, 23447599. Provide a HD Film Screen for no scratching or orange peel blur. || [Fitment of Gel-Free Touch Screen Display Replace] Fit For Cadillac ATS 2013-2017, For Cadillac CTS 2014-2017, For Cadillac ELR 2014-2016, For Cadillac Escalade 2015-2017, For Cadillac Escalade ESV 2015-2017, For Cadillac SRX 2013-2016, For Cadillac XTS 2013-2017. This is a normal phenomenon to replace screen to those vehicle adopt with for CUE Infotainment system. || [Function for Cue Touch Screen Display] Unlike the old gel based screen, this one adopt with anti glare coating for no gel tape to get faster touch response than olds. Replace the old or broken screen to get faster transmit, no more crack or shattered screen to see. || [Features] This new screen replacement adopt with fastern processor to avoid slow chip lag, come with dust proof rubber on side to anti ash and a removable plastic film on back to protect the screen. Equipped with suitable pliers and tools for convenient replacement without any damage. || [Package] Include 1 pc Screen, 1 set Trim Removal Tool. Please replace the screen carefully.
$29.99
 

13-11-2023

-: -
Touch Screen Display for 2013 2014 2015 2016 2017 Cadillac ATS CTS SRX XTS CUE Touch Screen Display
EASY TO FIX - Fix your cracked or unresponsive CUE system. This item includes a touch screen and a car dismantling tool. You can change the display screen by yourself in a rather short time. Professional installation are recommended. || SAVE MONEY - If you buy it from the dealership, it will cost as much as $1500.00 to $2000, but using this touch screen will save you so much money. You can watch installation video on Youtube || NOT AFRAID OF SUN EXPOSURE - Cadillac CUE replacement Touch Screen’s material is stable, reliable and durable. Don't be Afraid of sun's exposure. To keep the high quality, all items are 100% tested before shipping. || QUALITY GUARANTEE - We promise the lifetime maintenance and customer support. If there is any screen fault on your Cadillac, contact us to repair anytime. This is the choice of most customers. Exchange for new one is at service in one years. Support over phone is also a part of service.
Number on catalog scheme: 1
 

Compatible models:

D8A1-A MP; D8A2-A MP   Volvo.Penta

Volvo Penta entire parts catalog list:

D8A1-A MP; D8A2-A MP

Information:


Illustration 1 g01058327
Typical schematic
Illustration 2 g01091318
P1 ECM connector
(P1-34) J1939 data link −
(P1-42) J1939 shield
(P1-50) J1939 data link + Test Step 1. Inspect Electrical Connectors and Wiring
Turn the engine control switch (ECS) to the OFF/RESET position.
Thoroughly inspect the J1/P1 ECM connector and the J2/P2 ECM connector. Inspect all of the connectors that are associated with the circuit. Refer to Troubleshooting, "Electrical Connectors - Inspect" for details.
Perform a 45 N (10 lb) pull test on each of the wires in the ECM connectors that are associated with the circuit.
Check the ECM connector (allen head screw) for the proper torque of 6.0 N m (55 lb in).
Check the harness and wiring for abrasion and for pinch points. Expected Result:All connectors, pins and sockets are completely coupled and/or inserted. The harness and wiring are free of corrosion, of abrasion or of pinch points.Results:
OK - The harness and wiring appear to be okay. Proceed to Test Step 2.
Not OK - There is a problem in the wiring harness.Repair: Perform the following repair:Repair the connectors or wiring and/or replace the connectors or wiring. Ensure that all of the seals are properly in place and ensure that the connectors are completely coupled. Refer to Troubleshooting, "Electrical Connectors - Inspect".Verify that the repair eliminates the problem.STOPTest Step 2. Verify the Proper Installation of the Data Link Circuit
Disconnect any module that is connected to the CAN Data Link.
Disconnect J1/P1 ECM connector and measure the resistance between P1-50 (CAN Data Link +) and P1-34 (CAN Data Link -). Expected Result:The resistance is between 57 and 63 Ohms.Results:
OK - The resistance is within the range. Proceed to Test Step 5.
Not OK - The range of the resistance is 114 Ohms to 126 Ohms. A terminating resistor is missing.Repair: Verify that two terminating resistors exist on the data link. One resistor must be located on each end of the data link. The engine is shipped with one terminating resistor that is installed between the ECM and the customer connector.Refer to the Electrical Schematic in order to determine the missing resistor.Verify that the repair eliminates the problem.STOP
Not OK - Resistance is less than 57 Ohms. Proceed to Test Step 3.
Not OK - Resistance is greater than 126 Ohms. Proceed to Test Step 4.Test Step 3. Check for a Short Circuit
Disconnect the J1/P1 ECM connector.
Remove the terminating resistors from the CAN Data Link.
If a J1939 display is installed, disconnect the display.
Measure the resistance from the following pins to every pin on ECM connector P1 and to engine ground.
P1-50 (CAN Data Link +)
P1-34 (CAN Data Link -)
P1-42 (CAN Data Link Shield)Expected Result:The resistance is greater than 20,000 Ohms.Results:
OK - There are no shorts. Proceed to Test Step 4.
Not OK - A short exists in the wiring harness.Repair: Make the necessary repairs.Verify that the repair eliminates the problem.STOPTest Step 4. Check for an Open Circuit
Make sure that all connections remain disconnected.
Fabricate a jumper wire. Use the jumper wire in order to short pin J to pin G on the service tool connector.
Measure the resistance between P1-50 (CAN Data Link +) and P1-34 (CAN Data Link -) at the ECM connector.
Remove the wire short. Expected Result:The resistance is less than 5 Ohms.Results:
OK - There is not an open circuit. Proceed to Test Step 5.
Not OK - An open circuit exists in the wiring harness.Repair: Make the necessary repairs.Verify that the repair eliminates the problem.STOPTest Step 5. Check the Module on the CAN Data Link
Connect the module to another engine.
If the module operates properly on a different engine, there may be a problem with the ECM.
If the module does not function properly on the different engine, replace the module. Expected Result:The module operates properly.Results:
OK - The module operates properly on another engine.Repair: The problem may be intermittent. If the problem is intermittent, refer to Troubleshooting, "Electrical Connectors - Inspect".STOP
Not OK - The module does not operate properly on another engine.Repair: Replace the module. Verify that the repair corrects the problem.STOP


Parts cover Volvo Penta:

888622
Cover
888622 Cover
D1-13; D1-13B; D1-20, D11A-A; D11A-B; D11A-C, D11B1-A MP; D11B2-A MP, D11B3-A MP; D11B4-A MP, D2-55; D2-55B; D2-55C, D2-75; D2-75B; D2-75C, D8A1-A MP; D8A2-A MP, D9A2A; D9A2A D9-425; D9A2A D9-500
21144292
 
21144292 Cover
4.3GXiE-225-R, 4.3GXiE-M, 4.3GXiE-P; 4.3GXiE-Q, 5.0GXiCE-270-R; 5.0GiCE-225-S, 5.0GXiCE-J; 5.0GXiCE-JF; 5.0GXiCE-M, 5.0GXiCE-P, 5.0GXiE-270-R, 5.0GXiE-JF; 5.0GXiE-J; 5.0OSiE-JF, 5.0GXiE-P, 5.7GiCE-300-J; 5.7GiCE-300-JF; 5.7GXiCE-J, 5.7GiCE-300-P; 5.7
22807318
 
22807318 Cover
D11B1-A MP; D11B2-A MP, D11B3-A MP; D11B4-A MP, D13B-E MH; D13B-E MH (FE); D13B-N MH, D13C1-A MP; D13C2-A MP; D13C3-A MP, D16C-D MH, D3-110I-H; D3-140A-H; D3-140I-H, D4-180I-F; D4-225A-F; D4-225I-F, D6-300A-F; D6-300D-F; D6-300I-F, D8A1-A MP; D8A2-A
22561414
 
22561414 Cover
D8A1-A MP; D8A2-A MP, TAD540-42VE; TAD550-51VE; TAD540VE, TAD570VE; TAD571VE; TAD572VE, TAD840VE; TAD841VE; TAD842VE, TAD870VE; TAD871VE; TAD872VE
22011234
 
22011234 Cover
D8A1-A MP; D8A2-A MP
22741477
 
22741477 Cover
D8A1-A MP; D8A2-A MP
22741478
 
22741478 Cover
D8A1-A MP; D8A2-A MP
22865882
 
22865882 Cover
D8A1-A MP; D8A2-A MP
Back to top